Problem with Multi Tech MT 56000 ZDX modem
Adam Krzysztof Heczko (aheczko@bmj.com.pl)
Mon, 25 Jan 1999 13:50:36 +0100
This message is in MIME format. The first part should be readable text,
while the remaining parts are likely unreadable without MIME-aware tools.
Send mail to mime@docserver.cac.washington.edu for more info.
--1388511648-1787996622-917268636=:7591
Content-Type: TEXT/PLAIN; charset=US-ASCII
Hello Gert,
thanks for your answer. Yes, the problem was in my init string.
I had to set register 0 to 0 (ATS0=0). Now modem performs just fine.
As attachment I've added file with the original MT 56000 ZDX configuration
(factroy default, dumped with AT&V command).
Thank you again,
Adam Heczko.
On Sat, 23 Jan 1999, Gert Doering wrote:
> Hi,
>
> I'll forward your e-mail to the mgetty list (mgetty@muc.de). I do not
> have a Multitech modem, maybe some other reader of the list can help.
>
> Just as a side note: using only ATZ for resetting the modem isn't a very
> good idea, as the modem might reset to settings that are unfit for mgetty.
> The most important thing is to make sure that auto-answer is off, so you
> might want to change the modem init chat to be:
>
> init-chat "" ATZ OK ATS0=0E1Q0 OK
>
> (if it returns NO CARRIER immediately after ATA, it's usually a sign of
> "auto-answer and mgetty colliding" - see the "common problems" chapter in
> the mgetty documentation!)
>
> gert
--1388511648-1787996622-917268636=:7591
Content-Type: TEXT/PLAIN; charset=US-ASCII; name=multitech
Content-Transfer-Encoding: BASE64
Content-ID: <Pine.LNX.3.96.990125135036.7591C@bmj-lx1.bmj.com.pl>
Content-Description:
QUNUSVZFIFBST0ZJTEU6DQpCMSBFMSBMMSBNMSBOMSBRMCBUIFYxIFcwIFg0
IFkwICZDMSAmRDIgJkcyICZKMCAmSzMgJlE1ICZSMSAmUzAgJlQ1ICZYMCAm
WTANClMwMDowMDEgUzAxOjAwMCBTMDI6MDQzIFMwMzowMTMgUzA0OjAxMCBT
MDU6MDA4IFMwNjowMDcgUzA3OjA1MCBTMDg6MDAyDQpTMDk6MDA2DQpTMTA6
MDE0IFMxMTowOTUgUzEyOjA1MCBTMTg6MDAwIFMyNTowMDUgUzI2OjAwMSBT
MzY6MDA3IFMzNzowMDAgUzM4OjAyMA0KUzQ2OjEzOA0KUzQ4OjAwNyBTOTU6
MDAwDQoNCg0K
--1388511648-1787996622-917268636=:7591--