USR / Documentation foer AT#CID=...

• Messages sorted by:[ date ][ thread ][ subject ][ author ]

Gert,
Modem is busy right now, but ...   
  _________________________________________________________________
 
    #CID - Enable Caller ID Detection and Select Reporting Format        
     
   This command selects or disables Caller ID recognition and reporting
   in any mode.                                                       
 
      Parameters:                                 
      
   n = 0, 1, or 2                                              
   
      Result Codes:                                                      
       
   OK                                                                 
          n = 0, 1, or 2.
   
   ERROR
          Otherwise.
   
      Command options:
   
   #CID?            
          Returns the current setting (0,1 or 2) of the #CID command as
          an ASCII decimal value in result code format.    

--   
   #CID=?                                                               
          Returns the message, "0,1,2".           
   
   #CID=0                                                         
          Disables Caller ID.                                            
          
   #CID=1                                                             
          Enables formatted Caller ID reporting of ICLID SDM (Single Data
          Message) and MDM (Multiple Data Message) packets.
 
   #CID=2                                                             
          Enables unformatted Caller ID reporting of any ICLID packet
          received after the first RING cycle including SDM, MDM, or call
          waiting packets.
   
     _________________________________________________________________
 

Mike Holland <mike@golden.wattle.id.au>            Perth, Australia.
You can pick your friends, and you can pick your nose, but you can't
pick your friend's nose.

PGP ID 8B3D0765. FP: 30 07 BF 6C 9B 45 E8 C8  EA 30 4F 01 DC A2 91 88