vgetty inittab

"T. HEDGE" (i2wild@iquest.net)
Sun, 04 May 1997 19:40:24 -0500
Messages sorted by:[ date ][ thread ][ subject ][ author ]
Hi;

 I may have confused the fact that my modem is voice
capable in being a VI. I thought there was a difference in 
models between the VI and the newer (black) voice. Nevertheless;
here is a copy of my current inittab and log: 

file.s2:345:respawn:/sbin/vgetty -x8 -n3 -m '""ATH0' ttyS3 vt100 


05/04 13:26:21 yS3 reading port ttyS3 configuration from config file
/etc/mgett
y+sendfax/voice.conf
05/04 13:26:21 yS3 check for lockfiles
05/04 13:26:21 yS3 locking the line
05/04 13:26:21 yS3 tio_get_rs232_lines: TIOCMGET failed: I/O error
05/04 13:26:21 yS3 WARNING: DCD line still active, check modem settings
(AT&Dx)
05/04 13:26:21 yS3 lowering DTR to reset Modem
05/04 13:26:21 yS3 TIOCMBIC failed: I/O error
05/04 13:26:21 yS3 cannot turn off soft carrier: I/O error
05/04 13:26:21 yS3 tcgetattr failed: I/O error
05/04 13:26:21 yS3 cannot get TIO: I/O error
05/04 13:26:21 yS3 mg_init_device failed, trying again
05/04 13:26:21 yS3 tio_get_rs232_lines: TIOCMGET failed: I/O error
05/04 13:26:21 yS3 WARNING: DCD line still active, check modem settings
(AT&Dx)
05/04 13:26:21 yS3 lowering DTR to reset Modem
05/04 13:26:21 yS3 TIOCMBIC failed: I/O error
05/04 13:26:21 yS3 cannot turn off soft carrier: I/O error
05/04 13:26:21 yS3 tcgetattr failed: I/O error
05/04 13:26:21 yS3 cannot get TIO: I/O error
05/04 13:26:21 yS3 mg_init_device failed, exiting: I/O error
05/04 13:26:21 yS3 cannot get terminal line dev=ttyS3, exiting: I/O
error
--
05/04 13:26:21 yS3 vgetty: experimental test release 0.7.2 / 12Apr97
05/04 13:26:21 yS3 mgetty: experimental test release 1.1.5-Apr16
05/04 13:26:21 yS3 vgetty.c compiled at Apr 22 1997, 14:28:33
05/04 13:26:21 yS3 reading configuration data for port 'ttyS3'
05/04 13:26:21 yS3 reading /etc/mgetty+sendfax/mgetty.config...
05/04 13:26:21 yS3 conf lib: read: 'debug 4'
05/04 13:26:21 yS3 conf lib: read: 'fax-id 49 89 xxxxxxxx'
05/04 13:26:21 yS3 conf lib: read: 'speed 38400'
05/04 13:26:21 yS3 key: 'speed', type=0, flags=3, data=38400
05/04 13:26:21 yS3 key: 'switchbd', type=0, flags=1, data=0
05/04 13:26:21 yS3 key: 'direct', type=3, flags=1, data=FALSE
05/04 13:26:21 yS3 key: 'blocking', type=3, flags=1, data=FALSE
05/04 13:26:21 yS3 key: 'port-owner', type=1, flags=1, data=uucp
05/04 13:26:21 yS3 key: 'port-group', type=1, flags=1, data=uucp
05/04 13:26:21 yS3 key: 'port-mode', type=0, flags=1, data=432
05/04 13:26:21 yS3 key: 'toggle-dtr', type=3, flags=1, data=TRUE
05/04 13:26:21 yS3 key: 'toggle-dtr-waittime', type=0, flags=1,
data=500
05/04 13:26:21 yS3 key: 'data-only', type=3, flags=1, data=FALSE
05/04 13:26:21 yS3 key: 'fax-only', type=3, flags=1, data=FALSE
05/04 13:26:21 yS3 key: 'modem-type', type=1, flags=1, data=auto
05/04 13:26:21 yS3 key: 'init-chat', type=2, flags=2, data=ATH0 
05/04 13:26:21 yS3 key: 'force-init-chat', type=2, flags=1, data=
\d^P^C\d\d\


05/04 13:26:21 yS3 key: 'modem-check-time', type=0, flags=1, data=3600
05/04 13:26:21 yS3 key: 'rings', type=0, flags=2, data=3
05/04 13:26:21 yS3 key: 'get-cnd-chat', type=2, flags=0, data=(empty)
05/04 13:26:21 yS3 key: 'answer-chat', type=2, flags=1, data= ATA
CONNECT \c 
 
05/04 13:26:21 yS3 key: 'answer-chat-timeout', type=0, flags=1,
data=80
05/04 13:26:21 yS3 key: 'autobauding', type=3, flags=1, data=FALSE
05/04 13:26:21 yS3 key: 'ringback', type=3, flags=1, data=FALSE
05/04 13:26:21 yS3 key: 'ringback-time', type=0, flags=1, data=30
05/04 13:26:21 yS3 key: 'ignore-carrier', type=3, flags=1, data=FALSE
05/04 13:26:21 yS3 key: 'issue-file', type=1, flags=1, data=/etc/issue
05/04 13:26:21 yS3 key: 'prompt-waittime', type=0, flags=1, data=500
05/04 13:26:21 yS3 key: 'login-prompt', type=1, flags=1, data=login: 
05/04 13:26:21 yS3 key: 'login-time', type=0, flags=1, data=240
05/04 13:26:21 yS3 key: 'fido-send-emsi', type=3, flags=1, data=TRUE
05/04 13:26:21 yS3 key: 'fax-id', type=1, flags=3, data=49 89 xxxxxxxx
05/04 13:26:21 yS3 key: 'fax-server-file', type=1, flags=0,
data=(empty)
05/04 13:26:21 yS3 key: 'diskspace', type=0, flags=1, data=1024
05/04 13:26:21 yS3 key: 'notify', type=1, flags=1, data=faxadmin
05/04 13:26:21 yS3 key: 'fax-owner', type=1, flags=1, data=uucp
05/04 13:26:21 yS3 key: 'fax-group', type=1, flags=0, data=(empty)
05/04 13:26:21 yS3 key: 'fax-mode', type=0, flags=1, data=432
05/04 13:26:21 yS3 key: 'debug', type=0, flags=2, data=8
05/04 13:26:21 yS3 reading /etc/mgetty+sendfax/voice.conf...
05/04 13:26:21 yS3 conf lib: read: 'part generic'
05/04 13:26:21 yS3 section: part generic, **found**
05/04 13:26:21 yS3 conf lib: read: 'voice_log_level 4'
05/04 13:26:21 yS3 conf lib: read: 'voice_dir /var/spool/voice'
05/04 13:26:21 yS3 conf lib: read: 'message_flag_file .flag'
05/04 13:26:21 yS3 conf lib: read: 'receive_dir incoming'
05/04 13:26:21 yS3 conf lib: read: 'message_dir messages'
05/04 13:26:21 yS3 conf lib: read: 'message_list Index'
05/04 13:26:21 yS3 conf lib: read: 'backup_message standard.rmd'
05/04 13:26:21 yS3 conf lib: read: 'port_speed 38400'
05/04 13:26:21 yS3 conf lib: read: 'voice_shell /bin/sh'
05/04 13:26:21 yS3 conf lib: read: 'port_timeout 10'
05/04 13:26:21 yS3 conf lib: read: 'dial_timeout 90'
05/04 13:26:21 yS3 conf lib: read: 'command_delay 100'
05/04 13:26:21 yS3 conf lib: read: 'dtmf_len 30'
05/04 13:26:21 yS3 conf lib: read: 'dtmf_threshold 40'
05/04 13:26:21 yS3 conf lib: read: 'dtmf_wait 7'
05/04 13:26:21 yS3 conf lib: read: 'ignore_fax_dle false'
05/04 13:26:21 yS3 conf lib: read: 'raw_data false'
05/04 13:26:21 yS3 conf lib: read: 'rec_compression 0'
05/04 13:26:21 yS3 conf lib: read: 'rec_speed 0'
05/04 13:26:21 yS3 conf lib: read: 'rec_silence_len 70'
05/04 13:26:21 yS3 conf lib: read: 'rec_silence_threshold 40'
05/04 13:26:21 yS3 conf lib: read: 'rec_remove_silence false'
05/04 13:26:21 yS3 conf lib: read: 'rec_max_len 300'
05/04 13:26:21 yS3 conf lib: read: 'rec_min_len 0'
05/04 13:26:21 yS3 conf lib: read: 'do_hard_flow true'
05/04 13:26:21 yS3 conf lib: read: 'beep_frequency 933'
05/04 13:26:21 yS3 conf lib: read: 'beep_length 150'
05/04 13:26:21 yS3 conf lib: read: 'max_tries 3'
05/04 13:26:21 yS3 conf lib: read: 'retry_delay 5'
05/04 13:26:21 yS3 conf lib: read: 'watchdog_timeout 60'
05/04 13:26:21 yS3 conf lib: read: 'enable_command_echo true'
05/04 13:26:21 yS3 conf lib: read: 'program vgetty'
05/04 13:26:21 yS3 found CT_KEYWORD program vgetty
05/04 13:26:21 yS3 conf lib: read: 'rings 3'
05/04 13:26:21 yS3 conf lib: read: 'answer_mode voice:fax:data'
05/04 13:26:21 yS3 conf lib: read: 'force_autodetect false'
05/04 13:26:21 yS3 conf lib: read: 'toll_saver_rings 0'
05/04 13:26:21 yS3 conf lib: read: 'rec_always_keep true'
05/04 13:26:21 yS3 conf lib: read: 'button_program '
05/04 13:26:21 yS3 conf lib: read: 'call_program '
05/04 13:26:21 yS3 conf lib: read: 'dtmf_program dtmf.sh'
05/04 13:26:21 yS3 conf lib: read: 'message_program '
05/04 13:26:21 yS3 conf lib: read: 'do_message_light false'

05/04 13:26:21 yS3 conf lib: read: 'program vm'
05/04 13:26:21 yS3 conf lib: read: 'voice_devices ttyS3'
05/04 13:26:21 yS3 conf lib: read: 'dialout_timeout 90'
05/04 13:26:21 yS3 conf lib: read: 'program pvf'
05/04 13:26:21 yS3 conf lib: read: 'port ttyS3'
05/04 13:26:21 yS3 conf lib: read: 'ring_type virtual'
05/04 13:26:21 yS3 conf lib: read: 'answer_mode fax:data'
05/04 13:26:21 yS3 conf lib: read: 'ring_type ring'
05/04 13:26:21 yS3 conf lib: read: 'ring_type ring1'
05/04 13:26:21 yS3 key: 'part', type=6, flags=4, data=(ignored)
05/04 13:26:21 yS3 key: 'program', type=6, flags=4, data=(ignored)
05/04 13:26:21 yS3 key: 'port', type=6, flags=4, data=(ignored)
05/04 13:26:21 yS3 key: 'ring_type', type=6, flags=4, data=(ignored)
05/04 13:26:21 yS3 key: 'voice_log_level', type=0, flags=3, data=4
05/04 13:26:21 yS3 key: 'voice_devices', type=1, flags=0, data=(empty)
05/04 13:26:21 yS3 key: 'port_speed', type=0, flags=3, data=38400
05/04 13:26:21 yS3 key: 'port_timeout', type=0, flags=3, data=10
05/04 13:26:21 yS3 key: 'dtmf_len', type=0, flags=3, data=30
05/04 13:26:21 yS3 key: 'dtmf_threshold', type=0, flags=3, data=40
05/04 13:26:21 yS3 key: 'dtmf_wait', type=0, flags=3, data=7
05/04 13:26:21 yS3 key: 'rec_compression', type=0, flags=3, data=0
05/04 13:26:21 yS3 key: 'rec_speed', type=0, flags=3, data=0
05/04 13:26:21 yS3 key: 'rec_silence_len', type=0, flags=3, data=70


 It is a little out of sequence but should be complete. Any help
in this matter would be greatly appreciated. God! I want to be
able to never think I had to use Windows for anything. I would
greatly appreciate any help in this matter. Thanks again.



      Sincerely;
      i2wild@iquest.net
      Tim Hedges
.