[Fwd: vgetty inittab]

"T. HEDGE" (i2wild@iquest.net)
Thu, 08 May 1997 11:11:04 -0500
Messages sorted by:[ date ][ thread ][ subject ][ author ]
T. HEDGE wrote:
> 
> Hi;
> 
>  I may have confused the fact that my modem is voice
> capable in being a VI. I thought there was a difference in
> models between the VI and the newer (black) voice. Nevertheless;
> here is a copy of my current inittab and log:
> 
> file.s2:345:respawn:/sbin/vgetty -x8 -n3 -m '""ATH0' ttyS3 vt100
> 
> 05/04 13:26:21 yS3 reading port ttyS3 configuration from config file
> /etc/mgett
> y+sendfax/voice.conf
> 05/04 13:26:21 yS3 check for lockfiles
> 05/04 13:26:21 yS3 locking the line
> 05/04 13:26:21 yS3 tio_get_rs232_lines: TIOCMGET failed: I/O error
> 05/04 13:26:21 yS3 WARNING: DCD line still active, check modem settings
> (AT&Dx)
> 05/04 13:26:21 yS3 lowering DTR to reset Modem
> 05/04 13:26:21 yS3 TIOCMBIC failed: I/O error
> 05/04 13:26:21 yS3 cannot turn off soft carrier: I/O error
> 05/04 13:26:21 yS3 tcgetattr failed: I/O error
> 05/04 13:26:21 yS3 cannot get TIO: I/O error
> 05/04 13:26:21 yS3 mg_init_device failed, trying again
> 05/04 13:26:21 yS3 tio_get_rs232_lines: TIOCMGET failed: I/O error
> 05/04 13:26:21 yS3 WARNING: DCD line still active, check modem settings
> (AT&Dx)
> 05/04 13:26:21 yS3 lowering DTR to reset Modem
> 05/04 13:26:21 yS3 TIOCMBIC failed: I/O error
> 05/04 13:26:21 yS3 cannot turn off soft carrier: I/O error
> 05/04 13:26:21 yS3 tcgetattr failed: I/O error
> 05/04 13:26:21 yS3 cannot get TIO: I/O error
> 05/04 13:26:21 yS3 mg_init_device failed, exiting: I/O error
> 05/04 13:26:21 yS3 cannot get terminal line dev=ttyS3, exiting: I/O
> error
> --
> 05/04 13:26:21 yS3 vgetty: experimental test release 0.7.2 / 12Apr97
> 05/04 13:26:21 yS3 mgetty: experimental test release 1.1.5-Apr16
> 05/04 13:26:21 yS3 vgetty.c compiled at Apr 22 1997, 14:28:33
> 05/04 13:26:21 yS3 reading configuration data for port 'ttyS3'
> 05/04 13:26:21 yS3 reading /etc/mgetty+sendfax/mgetty.config...
> 05/04 13:26:21 yS3 conf lib: read: 'debug 4'
> 05/04 13:26:21 yS3 conf lib: read: 'fax-id 49 89 xxxxxxxx'
> 05/04 13:26:21 yS3 conf lib: read: 'speed 38400'
> 05/04 13:26:21 yS3 key: 'speed', type=0, flags=3, data=38400
> 05/04 13:26:21 yS3 key: 'switchbd', type=0, flags=1, data=0
> 05/04 13:26:21 yS3 key: 'direct', type=3, flags=1, data=FALSE
> 05/04 13:26:21 yS3 key: 'blocking', type=3, flags=1, data=FALSE
> 05/04 13:26:21 yS3 key: 'port-owner', type=1, flags=1, data=uucp
> 05/04 13:26:21 yS3 key: 'port-group', type=1, flags=1, data=uucp
> 05/04 13:26:21 yS3 key: 'port-mode', type=0, flags=1, data=432
> 05/04 13:26:21 yS3 key: 'toggle-dtr', type=3, flags=1, data=TRUE
> 05/04 13:26:21 yS3 key: 'toggle-dtr-waittime', type=0, flags=1,
> data=500
> 05/04 13:26:21 yS3 key: 'data-only', type=3, flags=1, data=FALSE
> 05/04 13:26:21 yS3 key: 'fax-only', type=3, flags=1, data=FALSE
> 05/04 13:26:21 yS3 key: 'modem-type', type=1, flags=1, data=auto
> 05/04 13:26:21 yS3 key: 'init-chat', type=2, flags=2, data=ATH0
> 05/04 13:26:21 yS3 key: 'force-init-chat', type=2, flags=1, data=
> \d^P^C\d\d\
> 
> 05/04 13:26:21 yS3 key: 'modem-check-time', type=0, flags=1, data=3600
> 05/04 13:26:21 yS3 key: 'rings', type=0, flags=2, data=3
> 05/04 13:26:21 yS3 key: 'get-cnd-chat', type=2, flags=0, data=(empty)
> 05/04 13:26:21 yS3 key: 'answer-chat', type=2, flags=1, data= ATA
> CONNECT \c
> 
> 05/04 13:26:21 yS3 key: 'answer-chat-timeout', type=0, flags=1,
> data=80
> 05/04 13:26:21 yS3 key: 'autobauding', type=3, flags=1, data=FALSE
> 05/04 13:26:21 yS3 key: 'ringback', type=3, flags=1, data=FALSE
> 05/04 13:26:21 yS3 key: 'ringback-time', type=0, flags=1, data=30
> 05/04 13:26:21 yS3 key: 'ignore-carrier', type=3, flags=1, data=FALSE
> 05/04 13:26:21 yS3 key: 'issue-file', type=1, flags=1, data=/etc/issue
> 05/04 13:26:21 yS3 key: 'prompt-waittime', type=0, flags=1, data=500
> 05/04 13:26:21 yS3 key: 'login-prompt', type=1, flags=1, data=login:
> 05/04 13:26:21 yS3 key: 'login-time', type=0, flags=1, data=240
> 05/04 13:26:21 yS3 key: 'fido-send-emsi', type=3, flags=1, data=TRUE
> 05/04 13:26:21 yS3 key: 'fax-id', type=1, flags=3, data=49 89 xxxxxxxx
> 05/04 13:26:21 yS3 key: 'fax-server-file', type=1, flags=0,
> data=(empty)
> 05/04 13:26:21 yS3 key: 'diskspace', type=0, flags=1, data=1024
> 05/04 13:26:21 yS3 key: 'notify', type=1, flags=1, data=faxadmin
> 05/04 13:26:21 yS3 key: 'fax-owner', type=1, flags=1, data=uucp
> 05/04 13:26:21 yS3 key: 'fax-group', type=1, flags=0, data=(empty)
> 05/04 13:26:21 yS3 key: 'fax-mode', type=0, flags=1, data=432
> 05/04 13:26:21 yS3 key: 'debug', type=0, flags=2, data=8
> 05/04 13:26:21 yS3 reading /etc/mgetty+sendfax/voice.conf...
> 05/04 13:26:21 yS3 conf lib: read: 'part generic'
> 05/04 13:26:21 yS3 section: part generic, **found**
> 05/04 13:26:21 yS3 conf lib: read: 'voice_log_level 4'
> 05/04 13:26:21 yS3 conf lib: read: 'voice_dir /var/spool/voice'
> 05/04 13:26:21 yS3 conf lib: read: 'message_flag_file .flag'
> 05/04 13:26:21 yS3 conf lib: read: 'receive_dir incoming'
> 05/04 13:26:21 yS3 conf lib: read: 'message_dir messages'
> 05/04 13:26:21 yS3 conf lib: read: 'message_list Index'
> 05/04 13:26:21 yS3 conf lib: read: 'backup_message standard.rmd'
> 05/04 13:26:21 yS3 conf lib: read: 'port_speed 38400'
> 05/04 13:26:21 yS3 conf lib: read: 'voice_shell /bin/sh'
> 05/04 13:26:21 yS3 conf lib: read: 'port_timeout 10'
> 05/04 13:26:21 yS3 conf lib: read: 'dial_timeout 90'
> 05/04 13:26:21 yS3 conf lib: read: 'command_delay 100'
> 05/04 13:26:21 yS3 conf lib: read: 'dtmf_len 30'
> 05/04 13:26:21 yS3 conf lib: read: 'dtmf_threshold 40'
> 05/04 13:26:21 yS3 conf lib: read: 'dtmf_wait 7'
> 05/04 13:26:21 yS3 conf lib: read: 'ignore_fax_dle false'
> 05/04 13:26:21 yS3 conf lib: read: 'raw_data false'
> 05/04 13:26:21 yS3 conf lib: read: 'rec_compression 0'
> 05/04 13:26:21 yS3 conf lib: read: 'rec_speed 0'
> 05/04 13:26:21 yS3 conf lib: read: 'rec_silence_len 70'
> 05/04 13:26:21 yS3 conf lib: read: 'rec_silence_threshold 40'
> 05/04 13:26:21 yS3 conf lib: read: 'rec_remove_silence false'
> 05/04 13:26:21 yS3 conf lib: read: 'rec_max_len 300'
> 05/04 13:26:21 yS3 conf lib: read: 'rec_min_len 0'
> 05/04 13:26:21 yS3 conf lib: read: 'do_hard_flow true'
> 05/04 13:26:21 yS3 conf lib: read: 'beep_frequency 933'
> 05/04 13:26:21 yS3 conf lib: read: 'beep_length 150'
> 05/04 13:26:21 yS3 conf lib: read: 'max_tries 3'
> 05/04 13:26:21 yS3 conf lib: read: 'retry_delay 5'
> 05/04 13:26:21 yS3 conf lib: read: 'watchdog_timeout 60'
> 05/04 13:26:21 yS3 conf lib: read: 'enable_command_echo true'
> 05/04 13:26:21 yS3 conf lib: read: 'program vgetty'
> 05/04 13:26:21 yS3 found CT_KEYWORD program vgetty
> 05/04 13:26:21 yS3 conf lib: read: 'rings 3'
> 05/04 13:26:21 yS3 conf lib: read: 'answer_mode voice:fax:data'
> 05/04 13:26:21 yS3 conf lib: read: 'force_autodetect false'
> 05/04 13:26:21 yS3 conf lib: read: 'toll_saver_rings 0'
> 05/04 13:26:21 yS3 conf lib: read: 'rec_always_keep true'
> 05/04 13:26:21 yS3 conf lib: read: 'button_program '
> 05/04 13:26:21 yS3 conf lib: read: 'call_program '
> 05/04 13:26:21 yS3 conf lib: read: 'dtmf_program dtmf.sh'
> 05/04 13:26:21 yS3 conf lib: read: 'message_program '
> 05/04 13:26:21 yS3 conf lib: read: 'do_message_light false'
> 
> 05/04 13:26:21 yS3 conf lib: read: 'program vm'
> 05/04 13:26:21 yS3 conf lib: read: 'voice_devices ttyS3'
> 05/04 13:26:21 yS3 conf lib: read: 'dialout_timeout 90'
> 05/04 13:26:21 yS3 conf lib: read: 'program pvf'
> 05/04 13:26:21 yS3 conf lib: read: 'port ttyS3'
> 05/04 13:26:21 yS3 conf lib: read: 'ring_type virtual'
> 05/04 13:26:21 yS3 conf lib: read: 'answer_mode fax:data'
> 05/04 13:26:21 yS3 conf lib: read: 'ring_type ring'
> 05/04 13:26:21 yS3 conf lib: read: 'ring_type ring1'
> 05/04 13:26:21 yS3 key: 'part', type=6, flags=4, data=(ignored)
> 05/04 13:26:21 yS3 key: 'program', type=6, flags=4, data=(ignored)
> 05/04 13:26:21 yS3 key: 'port', type=6, flags=4, data=(ignored)
> 05/04 13:26:21 yS3 key: 'ring_type', type=6, flags=4, data=(ignored)
> 05/04 13:26:21 yS3 key: 'voice_log_level', type=0, flags=3, data=4
> 05/04 13:26:21 yS3 key: 'voice_devices', type=1, flags=0, data=(empty)
> 05/04 13:26:21 yS3 key: 'port_speed', type=0, flags=3, data=38400
> 05/04 13:26:21 yS3 key: 'port_timeout', type=0, flags=3, data=10
> 05/04 13:26:21 yS3 key: 'dtmf_len', type=0, flags=3, data=30
> 05/04 13:26:21 yS3 key: 'dtmf_threshold', type=0, flags=3, data=40
> 05/04 13:26:21 yS3 key: 'dtmf_wait', type=0, flags=3, data=7
> 05/04 13:26:21 yS3 key: 'rec_compression', type=0, flags=3, data=0
> 05/04 13:26:21 yS3 key: 'rec_speed', type=0, flags=3, data=0
> 05/04 13:26:21 yS3 key: 'rec_silence_len', type=0, flags=3, data=70
> 
> It is a little out of sequence but should be complete. Any help
> in this matter would be greatly appreciated. God! I want to be
> able to never think I had to use Windows for anything. I would
> greatly appreciate any help in this matter. Thanks again.
>
Hmmm. Is this not the information I need to send in order for someone
to show me a working initialization (inittab) string for a USR sportster
33.6 VI?
 
>       Sincerely;
>      i2wild@iquest.net
>      Tim Hedges
.