second modem

Gert Doering (gert@greenie.muc.de)
Sat, 17 May 1997 22:51:58 +0200

Messages sorted by:[ date ][ thread ][ subject ][ author ]

Hi,

Chris G. Walter wrote:
> 05/17 11:14:02 yS1 tss: set speed to 19200 (016)
> 05/17 11:14:02 yS1 fax_send: 'ATV1Q0'
> 05/17 11:14:02 yS1 fax_wait_for(OK)
> 05/17 11:14:02 yS1 fax_wait_for: string '0'

The modem is *weird*. It should return *verbose* result codes ("OK"), not
numerical ones ("0"). After all, this is what ATV1 is for.

Hmm. Maybe this is the command echo of the "ATV1Q0" command (and the modem
got only the last byte), because the modem is not ready this quickly after 
the port becomes active. Please try changing the "ATV1Q0" init string in
sendfax.c to "AAAAAAAAAAAAAAATV1Q0" and see whether this changes anything.

> 05/17 11:14:19 ##### failed: got signal 2, pid=5981, dev=ttyS1, time=0s, acct=""

This was someone pressing ctrl-C - but it would have timed out soon
afterwards anyway.

gert

-- 
USENET is *not* the non-clickable part of WWW!
           //www.muc.de/~gert/
Gert Doering - Munich, Germany      gert@greenie.muc.de
fax: +49-89-3545980     gert.doering@physik.tu-muenchen.de
.