2nd page received half scrambled

• Messages sorted by:[ date ][ thread ][ subject ][ author ]

Thanks for the help, but unfortunately it didn't do any good. Now there
are no more error mesges during the initialisation. Instead the modem
doesn't receive anything anymore ... It seems to wait for something
until the sender finally hangs up ...
I included a more detailed log this time ...

Philippe


----- Original Message -----
From: Gert Doering <gert@greenie.muc.de>
To: Philippe A. R. Schaeffer <schaeff@BurgZweiffel.com>; <mgetty@muc.de>
Sent: Monday, May 03, 1999 7:29 PM
Subject: Re: 2nd page received half scrambled


> Hi,
>
> Dumb modem.  Try forcing the modem to class 2 by setting "modem-type
cls2"
> in mgetty.config - it doesn't respond to the AT+FCLASS=2.0 probe with
> ERROR, but doesn't know 2.0 commands either.
>
> gert
> --


05/04 23:16:44 yS1  mgetty: experimental test release 1.1.20-Jan17
05/04 23:16:44 yS1  check for lockfiles
05/04 23:16:44 yS1   checklock: stat failed, no file
05/04 23:16:44 yS1  locking the line
05/04 23:16:44 yS1   makelock(ttyS1) called
05/04 23:16:44 yS1   do_makelock: lock='/var/lock/LCK..ttyS1'
05/04 23:16:44 yS1   lock made
05/04 23:16:44 yS1   tio_get_rs232_lines: status: RTS CTS DSR DTR
05/04 23:16:44 yS1  lowering DTR to reset Modem
05/04 23:16:45 yS1   tss: set speed to 38400 (017)
05/04 23:16:45 yS1   tio_set_flow_control( HARD )
05/04 23:16:45 yS1   waiting for line to clear (VTIME), read:
05/04 23:16:45 yS1  send: \d\d\d+++\d\d\dAT&FS36=0E0Q0V1[0d]
05/04 23:16:48 yS1  waiting for ``OK''
05/04 23:16:48 yS1   got: [0d][0a]OK ** found **
05/04 23:16:48 yS1  send: AT[0d]
05/04 23:16:48 yS1  waiting for ``OK''
05/04 23:16:48 yS1   got: [0d]
05/04 23:16:48 yS1    CND: OK[0a][0d][0a]OK ** found **
05/04 23:16:48 yS1  send: AT[0d]
05/04 23:16:48 yS1  do_stat: expect 'OK' ** found **
05/04 23:16:48 yS1  send: ATI2[0d]
05/04 23:16:48 yS1  do_stat: expect 'OK' ** found **
05/04 23:16:48 yS1  mdm_send: 'AT+FCLASS=2'
05/04 23:16:48 yS1    got:[0a][0d][0a]OK[0d]
05/04 23:16:48 yS1   mdm_command: string 'OK' -> OK
05/04 23:16:48 yS1  mdm_send: 'AT+FCLASS=0'
05/04 23:16:48 yS1    got:[0a][0d][0a]OK[0d]
05/04 23:16:48 yS1   mdm_command: string 'OK' -> OK
05/04 23:16:48 yS1  mdm_send: 'AT+FAA=1;+FCR=1'
05/04 23:16:48 yS1    got:[0a][0d][0a]OK[0d]
05/04 23:16:48 yS1   mdm_command: string 'OK' -> OK
05/04 23:16:48 yS1  mdm_send: 'AT+FBOR=0'
05/04 23:16:48 yS1    got:[0a][0d][0a]OK[0d]
05/04 23:16:48 yS1   mdm_command: string 'OK' -> OK
05/04 23:16:49 yS1  mdm_send: 'AT+FLID="49 2202 932225"'
05/04 23:16:49 yS1    got:[0a][0d][0a]OK[0d]
05/04 23:16:49 yS1   mdm_command: string 'OK' -> OK
05/04 23:16:49 yS1  mdm_send: 'AT+FDCC=1,5,0,2,0,0,0,0'
05/04 23:16:49 yS1    got:[0a][0d][0a]OK[0d]
05/04 23:16:49 yS1   mdm_command: string 'OK' -> OK
05/04 23:16:49 yS1   waiting for line to clear (VTIME), read:
[0d][0a]OK[0d][0a]
05/04 23:16:49 yS1   removing lock file
05/04 23:16:49 yS1  waiting...
05/04 23:18:15 yS1    select returned 1
05/04 23:18:15 yS1   checking lockfiles, locking the line
05/04 23:18:15 yS1   makelock(ttyS1) called
05/04 23:18:15 yS1   do_makelock: lock='/var/lock/LCK..ttyS1'
05/04 23:18:15 yS1   lock made
05/04 23:18:15 yS1  wfr: waiting for ``RING''
05/04 23:18:15 yS1   got: [0a][0d][0a]RING[0d]
05/04 23:18:15 yS1    CND: RING
05/04 23:18:15 yS1   wfr: rc=0, drn=0
05/04 23:18:15 yS1  wfr: waiting for ``RING''
05/04 23:18:15 yS1   got: [0a][0d][0a]RING[0d]
05/04 23:18:20 yS1    CND: RING
05/04 23:18:20 yS1   wfr: rc=0, drn=0
05/04 23:18:20 yS1  send: ATA[0d]
05/04 23:18:20 yS1  waiting for ``CONNECT''
05/04 23:18:20 yS1   got: [0d]
05/04 23:19:08 yS1    CND: OK[0a]NO CARRIER
05/04 23:19:08 yS1  found action string: ``NO CARRIER''
05/04 23:19:08 ##### failed A_FAIL dev=ttyS1, pid=10677, caller='none',
conn='', name=''

05/04 23:19:08 yS1   removing lock file