Banksia MyVoice modems

• Messages sorted by:[ date ][ thread ][ subject ][ author ]

Hi Gert

> Well, yes -  RCV288DPi is a typical Rockwell data pump.  The vendor does
> not have to use the Rockwell controller chip, so they are free to
> implement any command set they like.

Whatever happened to international standards organisations? :)

> > None of the Rockwell voice AT commands work; all return an error,
>
> Ugh. Bad.

Bad? Well, I can assure you the modem can carry out voice functions.. If it
was external, I'd run a serial splitter on the line to work out what was
being passed between, but it's internal so it's a little harder...

BTW, I did get an e-mail back from Banksia, apparently they no longer offer
support via E-mail. I have to phone a number which is interstate, and
apparently I'll need my credit card number handy because it most likely will
require payment for a request of that nature..

> (Could you just run "mid" on your modem?  "mid" is Modem IDentify, can be
> found in the mgetty source tree in mgetty/tools/mid, and will check all
> ATI commands and some others - just run it as "mid /dev/ttyS1" or wherever
> your modem is, and mail me the output).

Of course! I forgot about mid.. Here's the output; You'll find out why I
didn't include ATI9.. From ATI8, the modem returns an error.


___
testing for modem on /dev/ttyS3 with 38400 bps...
>>> ATI
ATI
Banksia MyFastV34 336 Fax Modem Rev 34151PA1

OK
>>> ATI0
ATI0
Banksia MyFastV34 336 Fax Modem Rev 34151PA1

OK
>>> ATI1
ATI1
255

OK
>>> ATI2
ATI2
OK

OK
>>> ATI3
ATI3
V1.510-V34_DP

OK
>>> ATI4
ATI4
MyFastInModem-V34
Designed in Australia by Banksia Technology Pty Ltd

OK
>>> ATI5
ATI5
022

OK
>>> ATI6
ATI6
RCV288DPi Rev 05BA

OK
>>> ATI7
ATI7
255

OK
>>> ATI8
ATI8
ERROR
>>> ATI9
ATI9
ERROR
>>> ATI10
ATI10
ERROR
>>> ATI11
ATI11
ERROR
>>> ATI12
ATI12
ERROR
>>> ATI13
ATI13
ERROR
>>> ATI14
ATI14
ERROR
>>> ATI15
ATI15
ERROR
>>> AT+FCLASS=?
AT+FCLASS=?
0,1,2,80

OK
>>> AT+FMFR?
AT+FMFR?
ROCKWELL

OK
>>> AT+FMDL?
AT+FMDL?
AC/V34

OK
>>> AT+FREV?
AT+FREV?
V1.510-V34_DP

OK
>>> AT+FMI?
AT+FMI?
ERROR
>>> AT+FMM?
AT+FMM?
ERROR
>>> AT+FMR?
AT+FMR?
ERROR