USR-modem fax and data prob. remaining
Martin Lorenz (a9026080@unet.univie.ac.at)
Wed, 24 Jun 1998 22:08:54 +0200
This is a multi-part message in MIME format.
--------------B2114933FA6F6B1B718D40E0
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit
i wrote about my fax and data-receiving prob earlyer. i checked and
rechecked the documentation, asked my dealer and got a clue: i had a
german/austrian "postally-legalized" modem and so ATA and ATH1 were
blocked by some register. i fixed this and thought it would also fix my
problem. but it didn't i still cant receive fax- and data-calls whereas
voice woks very well
tnx for your help
attached is part of a logfile (for fax)
and this is, what my modem responds to a "vm diagnostics"
---
*
* Diagnostics for device /dev/ttyS2
*
* vgetty experimental test release 0.8.1 / 25Mar98
* port speed is set to 57600 baud.
*
ATI --> 3361
OK
ATI1 --> 3CEC
OK
ATI2 --> OK
ATI3 --> could not read from modem
---
this is what's in the log then:
---
06/24 22:02:15 vgetty: experimental test release 0.8.1 / 25Mar98
06/24 22:02:15 reading program vm configuration from config file
/etc/mgetty+sendfax/voice.conf
06/24 22:02:15 opening voice modem device
06/24 22:02:15 opened voice modem device /dev/ttyS2
06/24 22:02:15 reading port ttyS2 configuration from config file
/etc/mgetty+sendfax/voice.conf
06/24 22:02:15 detecting voice modem type
06/24 22:02:16 US Robotics detected
06/24 22:02:17 US Robotics voice modem
06/24 22:02:17 This is a driver beta version. V0.4.b3
06/24 22:02:17 VTD setup successful
06/24 22:02:30 vm: timeout while reading character from voice modem
06/24 22:02:41 vm: timeout while reading character from voice modem
--
here is a minicom-protokol with which i recorded the ati's
---
AT&F1&C1&D2S40=4E1L2M1Q0V1X3
OK
ati
3361
OK
ati1
3CEC
OK
ati2
OK
OK
ati3
USRobotics Sportster Voice 33600 Fax Rev. 2.0
OK
ati4
USRobotics Sportster Voice 33600 Fax Settings...
B0 E1 F1 L2 M1 Q0 V1 X3 Y0
BAUD=115200 PARITY=N WORDLEN=8
DIAL=PULSE ON HOOK
&A3 &B1 &C1 &D2 &G2 &H1 &I0 &K1
&M4 &N0 &P0 &R2 &S0 &T5 &U0 &Y1
S00=000 S01=000 S02=043 S03=013 S04=010 S05=008 S06=003
S07=040 S08=002 S09=006 S10=014 S11=080 S12=050 S13=000
S15=000 S16=000 S18=000 S19=010 S21=010 S22=017 S23=019
S25=005 S27=000 S28=008 S29=020 S30=000 S31=128 S32=002
S33=000 S34=000 S36=014 S38=000 S39=013 S40=004 S41=000
S42=000
LAST DIALED #: T0718914012
OK
ati5
USRobotics Sportster Voice 33600 Fax NVRAM Settings...
Template Y0
DIAL=PULSE B0 E1 F1 L2 M1 Q0 V1 X4
BAUD=38400 PARITY=N WORDLEN=8
&A3 &B1 &C1 &D2 &G2 &H1 &I0 &K1
&M4 &N0 &P0 &R2 &S0 &T5 &U0 &Y1
S00=000 S02=043 S03=013 S04=010 S05=008 S06=003 S07=040
S08=002 S09=006 S10=014 S11=080 S12=050 S13=000 S15=000
S19=010 S21=010 S22=017 S23=019 S25=005 S27=000 S28=008
S29=020 S30=000 S31=128 S32=002 S33=000 S34=000 S36=014
S38=000 S39=013 S40=000 S41=000 S42=000
Strike a key when ready . . .
Template Y1
DIAL=PULSE B0 E1 F1 L2 M1 Q0 V1 X4
BAUD=38400 PARITY=N WORDLEN=8
&A3 &B1 &C1 &D2 &G2 &H2 &I2 &K1
&M4 &N0 &P0 &R1 &S0 &T5 &U0 &Y1
S00=000 S02=043 S03=013 S04=010 S05=008 S06=003 S07=040
S08=002 S09=006 S10=014 S11=080 S12=050 S13=000 S15=000
S19=010 S21=010 S22=017 S23=019 S25=005 S27=000 S28=008
S29=020 S30=000 S31=128 S32=002 S33=000 S34=000 S36=014
S38=000 S39=013 S40=000 S41=000 S42=000
STORED PHONE #0:
#1:
#2:
#3:
OK
ati6
USRobotics Sportster Voice 33600 Fax Link Diagnostics...
Chars sent 19527 Chars Received 166394
Chars lost 0
Octets sent 8620 Octets Received 103138
Blocks sent 552 Blocks Received 1354
Blocks resent 2
Retrains Requested 0 Retrains Granted 1
Line Reversals 0 Blers 0
Link Timeouts 0 Link Naks 2
Data Compression V42BIS 2048/32
Equalization Long
Fallback Disabled
Protocol LAPM
Speed 33600/31200
Last Call 00:00:00
Disconnect Reason is DTR dropped
OK
ati7
Configuration Profile...
Product type Austria Internal
Options V32bis,V.FC,V.34+
Fax Options Class 1/Class 2.0
Clock Freq 92.0Mhz
Eprom 256k
Ram 64k
EPROM date 6/20/96
DSP date 6/20/96
EPROM rev 2.0
DSP rev 2.0
OK
ati8
Blacklist
Time: 22:08:58
Dialed Numbers: Inactive
Dial Attempts: 000 of 012
OK
ati9
(1.0USR0006\\Modem\Sportster 33600 FAX/VOICE INT)FF
OK
ati10
ERROR
ati11
USRobotics Sportster Voice 33600 Fax Link Diagnostics...
Modulation V.34+
Carrier Freq (Hz) 1959/1959
Symbol Rate 3429/3429
Trellis Code 64S-4D/64S-4D
Nonlinear Encoding ON/ON
Precoding OFF/ON
Shaping ON/ON
Preemphasis (-dB) 0/2
Recv/Xmit Level (-dBm) 23/17
SNR (dB) 39
Near Echo Loss (dB) 24
Far Echo Loss (dB) 55
Round Trip Delay (msec) 5
OK
--
Martin "Lolly" Lorenz
http://unet.univie.ac.at/~a9026080/
There is only one thing worse than Central Services...
...Microsoft
(in a world without fences - who needs Gates ... )
--------------B2114933FA6F6B1B718D40E0
Content-Type: text/plain; charset=us-ascii; name="vmesg"
Content-Transfer-Encoding: 7bit
Content-Disposition: inline; filename="vmesg"
06/23 15:42:00 yS2 waiting for ``RING_'' ** found **
06/23 15:42:00 yS2 waiting for ``RING_'' ** found **
06/23 15:42:06 yS2 waiting for ``RING_'' ** found **
06/23 15:42:12 yS2 reading ring_type ring configuration from config file /etc/mgetty+sendfax/voice.conf
06/23 15:42:13 yS2 playing voice file /usr/local/spool/voice/messages/computer.rmd
06/23 15:42:20 yS2 recording voice file /usr/local/spool/voice/incoming/va32591.rmd
06/23 15:42:27 yS2 mdm_send: 'AT+FBO=1' -> OK
06/23 15:42:27 yS2 send: ATA[0d][0a]
06/23 15:42:27 yS2 waiting for ``CONNECT''
06/23 15:42:45 yS2 found action string: ``+FCO_''
06/23 15:42:45 yS2 start fax receiver...
06/23 15:42:45 yS2 fax_wait_for(OK)
06/23 15:43:07 yS2 ABORTING: line='NO CARRIER'
06/23 15:43:07 yS2 mdm_send: 'AT+FLO=2' -> OK
06/23 15:43:07 yS2 fax_get_pages: no pages to receive
06/23 15:43:08 ##### fax dev=ttyS2, pid=32591, caller='none', name='', id='', +FHNG=-04, pages=0, time=00:00:55
06/23 15:43:09 yS2 mdm_send: 'ATH0' -> OK
06/23 15:43:09 yS2 vgetty: experimental test release 0.8.1 / 25Mar98
06/23 15:43:09 yS2 mgetty: experimental test release 1.1.14-Apr02
06/23 15:43:09 yS2 vgetty.c compiled at Jun 9 1998, 00:04:34
06/23 15:43:09 yS2 user id: 0, parent pid: 1
06/23 15:43:09 yS2 reading configuration data for port 'ttyS2'
06/23 15:43:09 yS2 reading /etc/mgetty+sendfax/mgetty.config...
06/23 15:43:09 yS2 conf lib: read: 'debug 9'
06/23 15:43:09 yS2 conf lib: read: 'fax-id ++43-1-726 54 37'
06/23 15:43:09 yS2 conf lib: read: 'speed 57600'
06/23 15:43:09 yS2 conf lib: read: 'port-owner root'
06/23 15:43:09 yS2 conf lib: read: 'port-group uucp'
06/23 15:43:09 yS2 conf lib: read: 'port-mode 0664'
06/23 15:43:09 yS2 conf lib: read: 'fax-owner root'
06/23 15:43:09 yS2 conf lib: read: 'fax-group private'
06/23 15:43:09 yS2 conf lib: read: 'fax-mode 0660'
06/23 15:43:09 yS2 conf lib: read: 'port ttyS1'
06/23 15:43:09 yS2 section: port ttyS1, ignore
06/23 15:43:09 yS2 conf lib: read: 'direct y'
06/23 15:43:09 yS2 conf lib: read: 'speed 115200'
06/23 15:43:09 yS2 conf lib: read: 'login-prompt Connected to @:\P by \I \n\r\C: login:'
06/23 15:43:09 yS2 conf lib: read: 'port ttyS2'
06/23 15:43:09 yS2 section: port ttyS2, **found**
06/23 15:43:09 yS2 conf lib: read: 'debug 9'
06/23 15:43:09 yS2 conf lib: read: 'init-chat "" \d\d\d+++\d\d\dATH0 OK AT&F1&C1&D2S40=4 OK ATM0 OK'
06/23 15:43:09 yS2 conf lib: read: 'notify martin'
06/23 15:43:09 yS2 conf lib: read: 'modem-type c2.0'
06/23 15:43:09 yS2 key: 'speed', type=0, flags=2, data=57600
06/23 15:43:09 yS2 key: 'switchbd', type=0, flags=1, data=0
06/23 15:43:09 yS2 key: 'direct', type=3, flags=1, data=FALSE
06/23 15:43:09 yS2 key: 'blocking', type=3, flags=1, data=FALSE
06/23 15:43:09 yS2 key: 'port-owner', type=1, flags=3, data=root
06/23 15:43:09 yS2 key: 'port-group', type=1, flags=3, data=uucp
06/23 15:43:09 yS2 key: 'port-mode', type=0, flags=3, data=436
06/23 15:43:09 yS2 key: 'toggle-dtr', type=3, flags=1, data=TRUE
06/23 15:43:09 yS2 key: 'toggle-dtr-waittime', type=0, flags=1, data=500
06/23 15:43:09 yS2 key: 'data-only', type=3, flags=1, data=FALSE
06/23 15:43:09 yS2 key: 'fax-only', type=3, flags=1, data=FALSE
06/23 15:43:09 yS2 key: 'modem-type', type=1, flags=3, data=c2.0
06/23 15:43:09 yS2 key: 'modem-quirks', type=0, flags=0, data=(empty)
06/23 15:43:09 yS2 key: 'init-chat', type=2, flags=3, data= \d\d\d+++\d\d\dATH0 OK AT&F1&C1&D2S40=4 OK ATM0 OK
06/23 15:43:09 yS2 key: 'force-init-chat', type=2, flags=1, data= \d\d\d\d+++\d\d\d
\dATQ0V1H0 OK
06/23 15:43:09 yS2 key: 'modem-check-time', type=0, flags=1, data=3600
06/23 15:43:09 yS2 key: 'rings', type=0, flags=1, data=1
06/23 15:43:09 yS2 key: 'get-cnd-chat', type=2, flags=0, data=(empty)
06/23 15:43:09 yS2 key: 'answer-chat', type=2, flags=1, data= ATA CONNECT \c
06/23 15:43:09 yS2 key: 'answer-chat-timeout', type=0, flags=1, data=80
06/23 15:43:09 yS2 key: 'autobauding', type=3, flags=1, data=FALSE
06/23 15:43:09 yS2 key: 'ringback', type=3, flags=1, data=FALSE
06/23 15:43:09 yS2 key: 'ringback-time', type=0, flags=1, data=30
06/23 15:43:09 yS2 key: 'ignore-carrier', type=3, flags=1, data=FALSE
06/23 15:43:09 yS2 key: 'issue-file', type=1, flags=1, data=/etc/issue
06/23 15:43:09 yS2 key: 'prompt-waittime', type=0, flags=1, data=500
06/23 15:43:09 yS2 key: 'login-prompt', type=1, flags=1, data=@!login:
06/23 15:43:09 yS2 key: 'login-time', type=0, flags=1, data=240
06/23 15:43:09 yS2 key: 'fido-send-emsi', type=3, flags=1, data=TRUE
06/23 15:43:09 yS2 key: 'fax-id', type=1, flags=3, data=++43-1-726 54 37
06/23 15:43:09 yS2 key: 'fax-server-file', type=1, flags=0, data=(empty)
06/23 15:43:09 yS2 key: 'diskspace', type=0, flags=1, data=1024
06/23 15:43:09 yS2 key: 'notify', type=1, flags=3, data=martin
06/23 15:43:09 yS2 key: 'fax-owner', type=1, flags=3, data=root
06/23 15:43:09 yS2 key: 'fax-group', type=1, flags=3, data=private
06/23 15:43:09 yS2 key: 'fax-mode', type=0, flags=3, data=432
06/23 15:43:09 yS2 key: 'debug', type=0, flags=2, data=9
06/23 15:43:09 yS2 key: 'statistics-chat', type=2, flags=0, data=(empty)
06/23 15:43:09 yS2 key: 'statistics-file', type=1, flags=0, data=(empty)
06/23 15:43:09 yS2 key: 'gettydefs', type=1, flags=1, data=n
06/23 15:43:09 yS2 key: 'term', type=1, flags=0, data=(empty)
06/23 15:43:09 yS2 reading generic configuration from config file /etc/mgetty+sendfax/voice.conf
06/23 15:43:09 yS2 reading /etc/mgetty+sendfax/voice.conf...
06/23 15:43:09 yS2 conf lib: read: 'part generic'
06/23 15:43:09 yS2 section: part generic, **found**
06/23 15:43:09 yS2 conf lib: read: 'voice_log_level 4'
06/23 15:43:09 yS2 conf lib: read: 'phone_owner root'
06/23 15:43:09 yS2 conf lib: read: 'phone_group private'
06/23 15:43:09 yS2 conf lib: read: 'phone_mode 0660'
06/23 15:43:09 yS2 conf lib: read: 'voice_dir /usr/local/spool/voice'
06/23 15:43:09 yS2 conf lib: read: 'message_flag_file .flag'
06/23 15:43:09 yS2 conf lib: read: 'receive_dir incoming'
06/23 15:43:09 yS2 conf lib: read: 'message_dir messages'
06/23 15:43:09 yS2 conf lib: read: 'message_list Index'
06/23 15:43:09 yS2 conf lib: read: 'backup_message standard.rmd'
06/23 15:43:09 yS2 conf lib: read: 'port_speed 38400'
06/23 15:43:09 yS2 conf lib: read: 'voice_shell /bin/sh'
06/23 15:43:09 yS2 conf lib: read: 'port_timeout 10'
06/23 15:43:09 yS2 conf lib: read: 'dial_timeout 90'
06/23 15:43:09 yS2 conf lib: read: 'command_delay 100'
06/23 15:43:09 yS2 conf lib: read: 'dtmf_len 30'
06/23 15:43:09 yS2 conf lib: read: 'dtmf_threshold 40'
06/23 15:43:09 yS2 conf lib: read: 'dtmf_wait 7'
06/23 15:43:09 yS2 conf lib: read: 'ignore_fax_dle false'
06/23 15:43:09 yS2 conf lib: read: 'raw_data false'
06/23 15:43:09 yS2 conf lib: read: 'rec_compression 1'
06/23 15:43:09 yS2 conf lib: read: 'rec_speed 0'
06/23 15:43:09 yS2 conf lib: read: 'rec_silence_len 70'
06/23 15:43:09 yS2 conf lib: read: 'rec_silence_threshold 40'
06/23 15:43:09 yS2 conf lib: read: 'rec_remove_silence false'
06/23 15:43:09 yS2 conf lib: read: 'rec_max_len 300'
06/23 15:43:09 yS2 conf lib: read: 'rec_min_len 0'
06/23 15:43:09 yS2 conf lib: read: 'do_hard_flow true'
06/23 15:43:09 yS2 conf lib: read: 'beep_frequency 933'
06/23 15:43:09 yS2 conf lib: read: 'beep_length 150'
06/23 15:43:09 yS2 conf lib: read: 'max_tries 3'
06/23 15:43:09 yS2 conf lib: read: 'retry_delay 5'
06/23 15:43:09 yS2 conf lib: read: 'watchdog_timeout 60'
06/23 15:43:09 yS2 conf lib: read: 'receive_gain -1'
06/23 15:43:09 yS2 conf lib: read: 'transmit_gain -1'
06/23 15:43:09 yS2 conf lib: read: 'enable_command_echo true'
06/23 15:43:09 yS2 conf lib: read: 'program vgetty'
06/23 15:43:09 yS2 found CT_KEYWORD program vgetty
06/23 15:43:09 yS2 conf lib: read: 'rings 3'
06/23 15:43:09 yS2 conf lib: read: 'answer_mode voice:fax:data'
06/23 15:43:09 yS2 conf lib: read: 'force_autodetect false'
06/23 15:43:09 yS2 conf lib: read: 'toll_saver_rings 0'
06/23 15:43:09 yS2 conf lib: read: 'rec_always_keep true'
06/23 15:43:09 yS2 conf lib: read: 'button_program '
06/23 15:43:09 yS2 conf lib: read: 'call_program '
06/23 15:43:09 yS2 conf lib: read: 'dtmf_program dtmf.sh'
06/23 15:43:09 yS2 conf lib: read: 'message_program '
06/23 15:43:09 yS2 conf lib: read: 'do_message_light false'
06/23 15:43:09 yS2 conf lib: read: 'program vm'
06/23 15:43:09 yS2 conf lib: read: 'voice_devices ttyS2'
06/23 15:43:09 yS2 conf lib: read: 'dialout_timeout 90'
06/23 15:43:09 yS2 conf lib: read: 'program pvf'
06/23 15:43:09 yS2 conf lib: read: 'port ttyS2'
06/23 15:43:09 yS2 conf lib: read: 'rings 3'
06/23 15:43:09 yS2 conf lib: read: 'ring_type virtual'
06/23 15:43:09 yS2 conf lib: read: 'answer_mode fax:data'
06/23 15:43:09 yS2 conf lib: read: 'ring_type ring'
06/23 15:43:09 yS2 conf lib: read: 'ring_type ring1'
06/23 15:43:09 yS2 key: 'part', type=6, flags=4, data=(ignored)
06/23 15:43:09 yS2 key: 'program', type=6, flags=4, data=(ignored)
06/23 15:43:09 yS2 key: 'port', type=6, flags=4, data=(ignored)
06/23 15:43:09 yS2 key: 'ring_type', type=6, flags=4, data=(ignored)
06/23 15:43:09 yS2 key: 'voice_log_level', type=0, flags=3, data=4
06/23 15:43:09 yS2 key: 'voice_shell', type=1, flags=3, data=/bin/sh
06/23 15:43:09 yS2 key: 'port_speed', type=0, flags=3, data=38400
06/23 15:43:09 yS2 key: 'port_timeout', type=0, flags=3, data=10
06/23 15:43:09 yS2 key: 'dial_timeout', type=0, flags=3, data=90
06/23 15:43:09 yS2 key: 'command_delay', type=0, flags=3, data=100
06/23 15:43:09 yS2 key: 'dtmf_len', type=0, flags=3, data=30
06/23 15:43:09 yS2 key: 'dtmf_threshold', type=0, flags=3, data=40
06/23 15:43:09 yS2 key: 'dtmf_wait', type=0, flags=3, data=7
06/23 15:43:09 yS2 key: 'ignore_fax_dle', type=3, flags=3, data=FALSE
06/23 15:43:09 yS2 key: 'raw_data', type=3, flags=3, data=FALSE
06/23 15:43:09 yS2 key: 'rec_compression', type=0, flags=3, data=1
06/23 15:43:09 yS2 key: 'rec_speed', type=0, flags=3, data=0
06/23 15:43:09 yS2 key: 'rec_silence_len', type=0, flags=3, data=70
06/23 15:43:09 yS2 key: 'rec_silence_threshold', type=0, flags=3, data=40
06/23 15:43:09 yS2 key: 'rec_remove_silence', type=3, flags=3, data=FALSE
06/23 15:43:09 yS2 key: 'rec_max_len', type=0, flags=3, data=300
06/23 15:43:09 yS2 key: 'rec_min_len', type=0, flags=3, data=0
06/23 15:43:09 yS2 key: 'do_hard_flow', type=3, flags=3, data=TRUE
06/23 15:43:09 yS2 key: 'force_autodetect', type=3, flags=1, data=FALSE
06/23 15:43:09 yS2 key: 'watchdog_timeout', type=0, flags=3, data=60
06/23 15:43:09 yS2 key: 'receive_gain', type=0, flags=3, data=-1
06/23 15:43:09 yS2 key: 'transmit_gain', type=0, flags=3, data=-1
06/23 15:43:09 yS2 key: 'enable_command_echo', type=3, flags=3, data=TRUE
06/23 15:43:09 yS2 key: 'poll_interval', type=0, flags=1, data=10
06/23 15:43:09 yS2 key: 'rings', type=1, flags=1, data=3
06/23 15:43:09 yS2 key: 'answer_mode', type=1, flags=1, data=voice:fax:data
06/23 15:43:09 yS2 key: 'toll_saver_rings', type=0, flags=1, data=0
06/23 15:43:09 yS2 key: 'rec_always_keep', type=3, flags=1, data=TRUE
06/23 15:43:09 yS2 key: 'voice_dir', type=1, flags=3, data=/usr/local/spool/voice
06/23 15:43:09 yS2 key: 'phone_owner', type=1, flags=3, data=root
06/23 15:43:09 yS2 key: 'phone_group', type=1, flags=3, data=private
06/23 15:43:09 yS2 key: 'phone_mode', type=0, flags=3, data=432
06/23 15:43:09 yS2 key: 'message_flag_file', type=1, flags=3, data=.flag
06/23 15:43:09 yS2 key: 'receive_dir', type=1, flags=3, data=incoming
06/23 15:43:09 yS2 key: 'message_dir', type=1, flags=3, data=messages
06/23 15:43:09 yS2 key: 'message_list', type=1, flags=3, data=Index
06/23 15:43:09 yS2 key: 'backup_message', type=1, flags=3, data=standard.rmd
06/23 15:43:09 yS2 key: 'button_program', type=1, flags=1, data=
06/23 15:43:09 yS2 key: 'call_program', type=1, flags=1, data=
06/23 15:43:09 yS2 key: 'dtmf_program', type=1, flags=1, data=dtmf.sh
06/23 15:43:09 yS2 key: 'message_program', type=1, flags=1, data=
06/23 15:43:09 yS2 key: 'do_message_light', type=3, flags=1, data=FALSE
06/23 15:43:09 yS2 key: 'beep_frequency', type=0, flags=3, data=933
06/23 15:43:09 yS2 key: 'beep_length', type=0, flags=3, data=150
06/23 15:43:09 yS2 key: 'max_tries', type=0, flags=3, data=3
06/23 15:43:09 yS2 key: 'retry_delay', type=0, flags=3, data=5
06/23 15:43:09 yS2 key: 'dialout_timeout', type=0, flags=1, data=90
06/23 15:43:09 yS2 key: 'voice_devices', type=1, flags=1, data=
06/23 15:43:09 yS2 reading program vgetty configuration from config file /etc/mgetty+sendfax/voice.conf
06/23 15:43:09 yS2 reading port ttyS2 configuration from config file /etc/mgetty+sendfax/voice.conf
06/23 15:43:09 yS2 check for lockfiles
06/23 15:43:09 yS2 locking the line
06/23 15:43:10 yS2 lowering DTR to reset Modem
06/23 15:43:10 yS2 send: \d\d\d+++\d\d\dATH0[0d][0a]
06/23 15:43:14 yS2 waiting for ``OK'' ** found **
06/23 15:43:14 yS2 send: AT&F1&C1&D2S40=4[0d][0a]
06/23 15:43:14 yS2 waiting for ``OK'' ** found **
06/23 15:43:14 yS2 send: ATM0[0d][0a]
06/23 15:43:14 yS2 waiting for ``OK'' ** found **
06/23 15:43:14 yS2 mdm_send: 'AT+FCLASS=2.0' -> OK
06/23 15:43:14 yS2 mdm_send: 'AT+FAA=1;+FCR=1' -> OK
06/23 15:43:14 yS2 mdm_send: 'AT+FBO=1' -> OK
06/23 15:43:15 yS2 mdm_send: 'AT+FNR=1,1,1,0' -> OK
06/23 15:43:15 yS2 mdm_send: 'AT+FLI="++43-1-726 54 37"' -> OK
06/23 15:43:15 yS2 mdm_send: 'AT+FCC=1,5,0,2,0,0,0,0' -> OK
06/23 15:43:15 yS2 detecting voice modem type
06/23 15:43:16 yS2 US Robotics detected
06/23 15:43:16 yS2 US Robotics voice modem
06/23 15:43:16 yS2 This is a driver beta version. V0.4.b3
06/23 15:43:17 yS2 VTD setup successful
06/23 15:43:18 yS2 waiting...
--------------B2114933FA6F6B1B718D40E0--