vgetty beep error

"Brian B." (ixnay@wws.net)
Thu, 3 Jun 1999 01:34:37 -0500
Messages sorted by:[ date ][ thread ][ subject ][ author ]
It seems that vgetty is answering my phone, playing my greeting, and recording
the callers message just fine. But after the caller hangs up the modem dosent
let go of my phone line I just get this constant beep forcing a reboot.

My modem is a Jaton Modulator 56 ( http://www.jaton.com ).

Here is part of /var/log/mgetty/vg_ttyS2.log

06/03 00:50:33 yS2   mdm_command: string 'OK' -> OK
06/03 00:50:33 yS2   tss: set speed to 38400 (017)
06/03 00:50:33 yS2   tio_set_flow_control( HARD )
06/03 00:50:33 yS2  detecting voice modem type
06/03 00:50:33 yS2    vgetty: ATE0
06/03 00:50:34 yS2    serial port: ATE0
06/03 00:50:34 yS2    serial port: OK
06/03 00:50:34 yS2   voice command: 'ATI' -> ''
06/03 00:50:34 yS2    vgetty: ATI
06/03 00:50:34 yS2    serial port: 56000
06/03 00:50:34 yS2    Rockwell: OK
06/03 00:50:34 yS2  Rockwell detected
06/03 00:50:34 yS2   vgetty: entering voice mode
06/03 00:50:34 yS2   vgetty: Installing signal handlers
06/03 00:50:34 yS2   voice command: 'AT#CLS?' -> ''
06/03 00:50:34 yS2    vgetty: AT#CLS?
06/03 00:50:34 yS2    Rockwell: 0
06/03 00:50:34 yS2   voice command: '' -> 'OK'
06/03 00:50:34 yS2    Rockwell: OK
06/03 00:50:34 yS2   voice command: 'AT#CLS=8' -> 'OK'
06/03 00:50:34 yS2    vgetty: AT#CLS=8
06/03 00:50:34 yS2    Rockwell: OK
06/03 00:50:34 yS2   voice command: 'AT' -> 'OK'
06/03 00:50:34 yS2    vgetty: AT
06/03 00:50:34 yS2    Rockwell: <DLE> <h>
06/03 00:50:34 yS2    vgetty: queued event HANDSET_ON_HOOK at position 0000
06/03 00:50:34 yS2    Rockwell:
06/03 00:50:34 yS2    Rockwell: OK
06/03 00:50:34 yS2    vgetty: queued event RESET_WATCHDOG at position 0001
06/03 00:50:34 yS2  initializing ROCKWELL voice modem
06/03 00:50:34 yS2   voice command: 'AT#VSP=70' -> 'OK'
06/03 00:50:35 yS2    vgetty: AT#VSP=70
06/03 00:50:35 yS2    vgetty: unqueued event HANDSET_ON_HOOK at position 0000
06/03 00:50:35 yS2    vgetty: voice_handle_event got event HANDSET_ON_HOOK with
data <
06/03 00:50:35 yS2    vgetty: unqueued event RESET_WATCHDOG at position 0001
06/03 00:50:35 yS2    vgetty: voice_handle_event got event RESET_WATCHDOG with
data <h>
06/03 00:50:35 yS2    Rockwell: OK
06/03 00:50:35 yS2   voice command: 'AT#VSD=0' -> 'OK'
06/03 00:50:35 yS2    vgetty: AT#VSD=0
06/03 00:50:35 yS2    Rockwell: OK
06/03 00:50:35 yS2   voice command: 'AT#VTD=3F,3F,3F' -> 'OK'
06/03 00:50:35 yS2    vgetty: AT#VTD=3F,3F,3F
06/03 00:50:35 yS2    Rockwell: OK
06/03 00:50:35 yS2   voice command: 'AT#VSS=1' -> 'OK'
06/03 00:50:35 yS2    vgetty: AT#VSS=1
06/03 00:50:35 yS2    Rockwell: OK
06/03 00:50:35 yS2   voice command: 'AT&K3' -> 'OK'
06/03 00:50:35 yS2    vgetty: AT&K3
06/03 00:50:35 yS2    Rockwell: OK
06/03 00:50:35 yS2   tio_set_flow_control( HARD )
06/03 00:50:35 yS2   vgetty: leaving voice mode
06/03 00:50:35 yS2   voice command: 'AT#CLS=0' -> 'OK'
06/03 00:50:35 yS2    vgetty: AT#CLS=0
06/03 00:50:35 yS2    Rockwell: OK
06/03 00:50:36 yS2   voice command: 'AT' -> 'OK'
06/03 00:50:36 yS2    vgetty: AT
06/03 00:50:36 yS2    Rockwell: OK
06/03 00:50:36 yS2   vgetty: Restoring signal handlers
06/03 00:50:36 yS2   waiting for line to clear (VTIME), read:
06/03 00:50:36 yS2   removing lock file
06/03 00:50:36 yS2  waiting...
06/03 00:54:18 yS2    select returned 1
06/03 00:54:18 yS2   checking lockfiles, locking the line
06/03 00:54:18 yS2   makelock(ttyS2) called
06/03 00:54:18 yS2   do_makelock: lock='/var/lock/LCK..ttyS2'
06/03 00:54:18 yS2   lock made
06/03 00:54:18 yS2    vgetty: number of rings (3) was set directly
06/03 00:54:18 yS2  wfr: waiting for ``RING''
06/03 00:54:18 yS2   got: [0a][0d][0a]RING[0d]
06/03 00:54:18 yS2    CND: RING
06/03 00:54:18 yS2   wfr: rc=0, drn=0
06/03 00:54:18 yS2  wfr: waiting for ``RING''
06/03 00:54:18 yS2   got: [0a][0d][0a]RING[0d]
06/03 00:54:24 yS2    CND: RING
06/03 00:54:24 yS2   wfr: rc=0, drn=0
06/03 00:54:24 yS2  wfr: waiting for ``RING''
06/03 00:54:24 yS2   got: [0a][0d][0a]RING[0d]
06/03 00:54:30 yS2    CND: RING
06/03 00:54:30 yS2   wfr: rc=0, drn=0
06/03 00:54:30 yS2    CND: check no: 'none'
06/03 00:54:30 yS2  reading ring_type ring configuration from config file
/etc/mgetty/voice.conf
06/03 00:54:30 yS2   reading /etc/mgetty/voice.conf...
06/03 00:54:30 yS2   conf lib: read: 'part generic'




then some more more related to the error I think

06/03 00:54:37 yS2  recording voice file /var/spool/voice/incoming/va00163.rmd
06/03 00:54:37 yS2    vgetty: queued event RESET_WATCHDOG at position 0008
06/03 00:54:37 yS2   voice command: 'AT#VBS=2' -> 'OK'
06/03 00:54:37 yS2    vgetty: AT#VBS=2
06/03 00:54:37 yS2    vgetty: unqueued event RESET_WATCHDOG at position 0008
06/03 00:54:37 yS2    vgetty: voice_handle_event got event RESET_WATCHDOG with
data <d>
06/03 00:54:37 yS2    Rockwell: OK
06/03 00:54:37 yS2    vgetty: queued event RESET_WATCHDOG at position 0009
06/03 00:54:37 yS2    vgetty: unqueued event RESET_WATCHDOG at position 0009
06/03 00:54:37 yS2    vgetty: voice_handle_event got event RESET_WATCHDOG with
data <d>
06/03 00:54:37 yS2   voice command: 'AT&K3' -> 'OK'
06/03 00:54:37 yS2    vgetty: AT&K3
06/03 00:54:37 yS2    Rockwell: OK
06/03 00:54:38 yS2   tio_set_flow_control( HARD XON_IN )
06/03 00:54:38 yS2   voice command: 'AT#VRX' -> 'CONNECT'
06/03 00:54:38 yS2    vgetty: AT#VRX
06/03 00:54:38 yS2    Rockwell: CONNECT
06/03 00:54:54 yS2    Rockwell: <DLE> <q>
06/03 00:54:54 yS2    vgetty: queued event SILENCE_DETECTED at position 0010
06/03 00:54:54 yS2    vgetty: unqueued event SILENCE_DETECTED at position 0010
06/03 00:54:54 yS2    vgetty: voice_handle_event got event SILENCE_DETECTED
with data <d>
06/03 00:54:54 yS2    vgetty: <STOP RECORDING>
06/03 00:54:54 yS2    Rockwell: <VOICE DATA 28407 bytes>
06/03 00:54:54 yS2    Rockwell: <DLE> <ETX>
06/03 00:54:54 yS2   voice command: '' -> 'OK|VCON'
06/03 00:54:54 yS2    Rockwell: VCON
06/03 00:54:54 yS2    vgetty: queued event RESET_WATCHDOG at position 0011
06/03 00:54:54 yS2   voice command: 'AT#VTS=[933,0,15]' -> ''
06/03 00:54:54 yS2    vgetty: AT#VTS=[933,0,15]
06/03 00:54:54 yS2    vgetty: unqueued event RESET_WATCHDOG at position 0011
06/03 00:54:54 yS2    vgetty: voice_handle_event got event RESET_WATCHDOG with
data <
06/03 00:54:54 yS2   voice command: '' -> 'OK'
06/03 00:54:54 yS2    Rockwell:
06/03 00:55:05 yS2  vgetty: timeout while reading character from voice modem
06/03 00:55:05 yS2  /dev/ttyS2: Beep command failed
06/03 00:55:05 yS2    vgetty: queued event RESET_WATCHDOG at position 0012
06/03 00:55:05 yS2   voice command: 'ATH0' -> 'VCON|OK'
06/03 00:55:05 yS2    vgetty: ATH0
06/03 00:55:05 yS2    vgetty: unqueued event RESET_WATCHDOG at position 0012
06/03 00:55:05 yS2    vgetty: voice_handle_event got event RESET_WATCHDOG with
data <
06/03 00:55:05 yS2    Rockwell:
06/03 00:55:16 yS2  vgetty: timeout while reading character from voice modem
06/03 00:55:16 yS2   voice command: 'AT#VLS=0' -> 'OK'
06/03 00:55:16 yS2    vgetty: AT#VLS=0
06/03 00:55:16 yS2    Rockwell:
06/03 00:55:27 yS2  vgetty: timeout while reading character from voice modem
06/03 00:55:27 yS2   vgetty: leaving voice mode
06/03 00:55:27 yS2   voice command: 'AT#CLS=0' -> 'OK'
06/03 00:55:27 yS2    vgetty: AT#CLS=0
06/03 00:55:27 yS2    Rockwell:
06/03 00:55:38 yS2  vgetty: timeout while reading character from voice modem
06/03 00:55:38 yS2   vgetty: Restoring signal handlers
06/03 00:55:38 yS2  closing voice modem device
06/03 00:55:38 yS2   removing lock file
06/03 00:55:38 ##### message keep, length=00:00:17, name='', caller=none,
dev=ttyS2, pid=163


Sorry I offend anyone for posting such a large mail but everything seemed
important as far as showing the modem detected and the beep error.

any help would be appreciated.