Elsa Microlink 56k PRO don't accept incoming fax

• Messages sorted by:[ date ][ thread ][ subject ][ author ]

Hi, 

Gert Doering <gert@greenie.muc.de> wrote:
:> I have a Elsa Microlink 56k PRO with firmware v1.59. 
:> The problem is, the microlink don't get an incoming fax. It takes off the
:> phoneline and make handshake with the other modem, but there is no connection.
:> I can send a fax but don't get a fax.
:> Has anybody a working init-string?

: Make sure you use the very latest firmware version (from www.elsa.de).
: There have been some problems with earlier releases.

I have the latest firmware version (from www.elsa.de).

: If that doesn't help, send us a log file.

---- mg_ttyS0.log -----
06/07 23:11:19 yS0  mgetty: experimental test release 1.1.18-Sep11
06/07 23:11:19 yS0  check for lockfiles
06/07 23:11:19 yS0  locking the line
06/07 23:11:20 yS0  lowering DTR to reset Modem
06/07 23:11:20 yS0  send: \dATS0=0Q0&D2&K3N1%E1&Q5[0d]
06/07 23:11:21 yS0  waiting for ``OK'' ** found **
06/07 23:11:21 yS0  mdm_send: 'ATI'
06/07 23:11:21 yS0  ELSA MicroLink 28.8 TQV detected
06/07 23:11:21 yS0  mdm_send: 'ATI3' 
06/07 23:11:21 yS0  additional info: 'Version 1.59 / 23.02.1999 / D'
06/07 23:11:21 yS0  mdm_send: 'AT+FCLASS=2.0' -> OK
06/07 23:11:21 yS0  mdm_send: 'AT+FAA=1;+FCR=1' -> OK
06/07 23:11:21 yS0  mdm_send: 'AT+FBO=1' -> OK
06/07 23:11:21 yS0  mdm_send: 'AT+FNR=1,1,1,0' -> OK
06/07 23:11:21 yS0  mdm_send: 'AT+FLI="'+49 3542 83828'"' -> OK
06/07 23:11:21 yS0  mdm_send: 'AT+FCC=1,5,0,2,0,0,0,0' -> OK
06/07 23:11:22 yS0  waiting...
06/07 23:13:47 yS0  wfr: waiting for ``RING''
06/07 23:13:47 yS0  wfr: waiting for ``RING''
06/07 23:13:52 yS0  wfr: waiting for ``RING''
06/07 23:13:57 yS0  cannot set controlling tty (ioctl): Operation not permitted
06/07 23:13:57 yS0  send: ATA[0d]
06/07 23:13:57 yS0  waiting for ``CONNECT''
06/07 23:14:36 yS0  found action string: ``NO CARRIER''
06/07 23:14:36 ##### failed A_FAIL dev=ttyS0, pid=4265, caller='none', conn='',
+name=''

--
06/07 23:15:01 yS0  mgetty: experimental test release 1.1.18-Sep11
06/07 23:15:01 yS0  check for lockfiles
06/07 23:15:01 yS0  locking the line
06/07 23:15:01 yS0  lowering DTR to reset Modem
06/07 23:15:02 yS0  send: \dATQ0V1H0[0d]
06/07 23:15:03 yS0  waiting for ``OK'' ** found **
06/07 23:15:03 yS0  send: AT[0d]
06/07 23:15:03 yS0  waiting for ``OK'' ** found **
06/07 23:15:03 yS0  mdm_send: 'ATI'
06/07 23:15:03 yS0  ELSA MicroLink 28.8 TQV detected
06/07 23:15:03 yS0  mdm_send: 'ATI3'
06/07 23:15:03 yS0  additional info: 'Version 1.59 / 23.02.1999 / D'
06/07 23:15:03 yS0  mdm_send: 'AT+FCLASS=2.0' -> OK
06/07 23:15:03 yS0  mdm_send: 'AT+FAA=1;+FCR=1' -> OK
06/07 23:15:03 yS0  mdm_send: 'AT+FBO=1' -> OK
06/07 23:15:03 yS0  mdm_send: 'AT+FNR=1,1,1,0' -> OK
06/07 23:15:03 yS0  mdm_send: 'AT+FLI="'+49 3542 83828'"' -> OK
06/07 23:15:03 yS0  mdm_send: 'AT+FCC=1,5,0,2,0,0,0,0' -> OK
06/07 23:15:04 yS0  waiting...
06/08 00:04:08 yS0  wfr: waiting for ``RING''
06/08 00:04:08 yS0  wfr: waiting for ``RING''
06/08 00:04:13 yS0  wfr: waiting for ``RING''
06/08 00:04:18 yS0  send: ATA[0d]
06/08 00:04:18 yS0  waiting for ``CONNECT''
06/08 00:04:57 yS0  found action string: ``NO CARRIER''
06/08 00:04:57 ##### failed A_FAIL dev=ttyS0, pid=4284, caller='none', conn='',
+name=''
---------- mg_ttyS0.log -------

This are 2 tests. The first is with an init-string. The second is without an
init-string.

I can make login-calls, but get the following warning.

 06/07 23:10:41 yS0  cannot set controlling tty (ioctl): Operation not permitted

I don't see an way now.

by ...
-- 
     Thomas Kobienia <tk@dex.de>      |  ("`-''-/").___..--''"`-._
        http://my.dex.de/~tk/         |    `6_ 6 /         (    ).`-.__.`)
"if privacy is outlawed, only outlaws |    (_Y_.)'  ._   )  `._ `.``-..-'
 will have privacy." (Phil Zimmermann)|  _..`--'_..-_/  /--'_.' ,'
                                      | (il),-''  (li),'  ((!.-'