sendfax und Fehler ???

Ralf Thomas (thomcom@t-online.de)
Wed, 09 Jun 1999 20:08:36 +0200
Messages sorted by:[ date ][ thread ][ subject ][ author ]
halloechen !!!
nun ich hoffe ich bin richtig. ich moechte sendfax nutzen.
leider funktioniert dies nicht. das fax wird angesprochen
und es wird auch uebertragen, jedoch wird es immer wieder gesendet,
da am ende ein fehler auftritt ???
siehe:
06/09 18:07:39 yS1   fax_wait_for: string '+FHNG: 54'
06/09 18:07:39 yS1  connection hangup: '+FHNG: 54'
06/09 18:07:39 yS1   (No response to EOP repeated 3 times)
06/09 18:07:39 yS1   fax_wait_for: string 'OK'** found **
06/09 18:07:39 ##### failed transmitting f1.g3: phone="351062", +FHS:54,
dev=tt
leider weiss ich nicht woran dies liegt.

auf antwort hoffend.
per e-mail
ralf

thomas@hettstedt.de
http://www.hettstedt.de

ich bekomme in der 
/var/log/sendfax.log 
folgenden ausdruck:

06/09 18:06:44  sendfax: experimental test release 1.1.18-Sep11
06/09 18:06:44   sendfax.c compiled at Dec 12 1998, 02:47:11
06/09 18:06:44  sending fax to 351062
06/09 18:06:44  checking f1.g3
06/09 18:06:44   makelock(ttyS1) called
06/09 18:06:44   do_makelock: lock='/var/lock/LCK..ttyS1'
06/09 18:06:44   lock made
06/09 18:06:44   tss: set speed to 38400 (017)
06/09 18:06:44   tio_set_flow_control( HARD )
06/09 18:06:44 yS1   fax_open_device succeeded, ttyS1 -> 4
06/09 18:06:44 yS1   reading specific data for port 'ttyS1'
06/09 18:06:44 yS1   reading /etc/mgetty+sendfax/sendfax.config...
06/09 18:06:44 yS1   conf lib: read: 'verbose y'
06/09 18:06:44 yS1   conf lib: read: 'debug 5'
06/09 18:06:44 yS1   conf lib: read: 'fax-devices ttyS1:ttyS2'
06/09 18:06:44 yS1   conf lib: read: 'fax-id +49 7171/351062'
06/09 18:06:44 yS1   conf lib: read: 'dial-prefix ATDT'
06/09 18:06:44 yS1   conf lib: read: 'max-tries 3'
06/09 18:06:44 yS1   conf lib: read: 'max-tries-continue y'
06/09 18:06:44 yS1   key: 'fax-devices', type=1, flags=4, data=(ignored)
06/09 18:06:44 yS1   key: 'modem-init', type=1, flags=0, data=(empty)
06/09 18:06:44 yS1   key: 'modem-handshake', type=1, flags=0,
data=(empty)
06/09 18:06:44 yS1   key: 'modem-type', type=1, flags=1, data=auto
06/09 18:06:44 yS1   key: 'modem-quirks', type=0, flags=0, data=(empty)
06/09 18:06:44 yS1   key: 'max-tries', type=0, flags=3, data=3
06/09 18:06:44 yS1   key: 'max-tries-continue', type=3, flags=3,
data=TRUE
06/09 18:06:44 yS1   key: 'speed', type=0, flags=1, data=38400
06/09 18:06:44 yS1   key: 'switchbd', type=0, flags=1, data=0
06/09 18:06:44 yS1   key: 'open-delay', type=0, flags=0, data=(empty)
06/09 18:06:44 yS1   key: 'ignore-carrier', type=3, flags=1, data=TRUE
06/09 18:06:44 yS1   key: 'dial-prefix', type=1, flags=3, data=ATDT
06/09 18:06:44 yS1   key: 'fax-id', type=1, flags=3, data=+49
7171/351062
06/09 18:06:44 yS1   key: 'poll-dir', type=1, flags=1, data=.
06/09 18:06:44 yS1   key: 'normal-res', type=3, flags=1, data=FALSE
06/09 18:06:44 yS1   key: 'fax-min-speed', type=0, flags=1, data=0
06/09 18:06:44 yS1   key: 'fax-max-speed', type=0, flags=1, data=14400
06/09 18:06:44 yS1   key: 'debug', type=0, flags=3, data=5
06/09 18:06:44 yS1   key: 'verbose', type=3, flags=2, data=TRUE
06/09 18:06:44 yS1   key: '', type=3, flags=1, data=FALSE
06/09 18:06:44 yS1   key: 'page-header', type=1, flags=0, data=(empty)
06/09 18:06:44 yS1   key: '', type=3, flags=1, data=FALSE
06/09 18:06:44 yS1   key: '', type=3, flags=1, data=FALSE
06/09 18:06:44 yS1   key: '', type=1, flags=1, data=
06/09 18:06:44 yS1   tss: set speed to 38400 (017)
06/09 18:06:44 yS1  mdm_send: 'ATV1Q0'
06/09 18:06:44 yS1   mdm_command: string 'ATV1Q0'
06/09 18:06:45 yS1   mdm_command: string 'OK' -> OK
06/09 18:06:45 yS1  mdm_send: 'ATI'
06/09 18:06:45 yS1   mdm_gis: string 1: '242'
06/09 18:06:45 yS1   mdm_identify: string '242'
06/09 18:06:45 yS1  unknown numerical modem id 242
06/09 18:06:45 yS1  mdm_send: 'AT+FCLASS=2.0'
06/09 18:06:45 yS1   mdm_command: string 'AT+FCLASS=2.0'
06/09 18:06:45 yS1   mdm_command: string 'ERROR' -> ERROR
06/09 18:06:45 yS1  mdm_send: 'AT+FCLASS=2'
06/09 18:06:45 yS1   mdm_command: string 'AT+FCLASS=2'
06/09 18:06:45 yS1   mdm_command: string 'OK' -> OK
06/09 18:06:46 yS1  mdm_send: 'AT+FLID="+49 7171/351062"'
06/09 18:06:46 yS1   mdm_command: string 'AT+FLID="+49 7171/351062"'
06/09 18:06:46 yS1   mdm_command: string 'OK' -> OK 
06/09 18:06:46 yS1  mdm_send: 'AT+FDCC=1,5,0,2,0,0,0,0'
06/09 18:06:46 yS1   mdm_command: string 'AT+FDCC=1,5,0,2,0,0,0,0'
06/09 18:06:46 yS1   mdm_command: string 'OK' -> OK
06/09 18:06:46 yS1  mdm_send: 'AT+FBOR=0'
06/09 18:06:46 yS1   mdm_command: string 'AT+FBOR=0'
06/09 18:06:46 yS1   mdm_command: string 'OK' -> OK
06/09 18:06:46 yS1  fax_send: 'ATDT351062'
06/09 18:06:46 yS1  fax_wait_for(OK)
06/09 18:06:46 yS1   fax_wait_for: string 'ATDT351062'
06/09 18:07:00 yS1   fax_wait_for: string 'CED'
06/09 18:07:06 yS1   fax_wait_for: string '+FCON'
06/09 18:07:06 yS1   fax_wait_for: string '+FNSF: 00 00 11 80 00 8A 41
10 20 20
06/09 18:07:06 yS1   fax_wait_for: string '+FCSI: "       49 6732
63415"'
06/09 18:07:06 yS1  fax_id: '+FCSI: "       49 6732 63415"'
06/09 18:07:06 yS1   fax_wait_for: string '+FDIS: 1,3,0,2,0,0,0,4'
06/09 18:07:06 yS1   fax_wait_for: string 'OK'** found **
06/09 18:07:06 yS1  sendfax: IGNORE DCD (carrier) status
06/09 18:07:06 yS1   fax_send_page("f1.g3") started...
06/09 18:07:06 yS1   tio_set_flow_control( HARD )
06/09 18:07:06 yS1  fax_send: 'AT+FDT'
06/09 18:07:06 yS1  fax_wait_for(CONNECT)
06/09 18:07:06 yS1   fax_wait_for: string 'AT+FDT'
06/09 18:07:12 yS1   fax_wait_for: string '+FDCS: 1,3,0,2,0,0,0,5'
06/09 18:07:12 yS1  transmission par.: '+FDCS: 1,3,0,2,0,0,0,5'
06/09 18:07:14 yS1   fax_wait_for: string 'CONNECT'** found **
06/09 18:07:14 yS1   waiting for XON, got:[0a][11]
06/09 18:07:14 yS1   tio_set_flow_control( HARD XON_OUT )
06/09 18:07:14 yS1  sending f1.g3...
06/09 18:07:19 yS1  page complete, 10314 bytes sent
06/09 18:07:19 yS1  sending DLE ETX...
06/09 18:07:19 yS1  fax_wait_for(OK)
06/09 18:07:22 yS1   fax_wait_for: string 'OK'** found **
06/09 18:07:22 yS1  fax_send: 'AT+FET=2'
06/09 18:07:22 yS1  fax_wait_for(OK)
06/09 18:07:22 yS1   fax_wait_for: string 'AT+FET=2'
06/09 18:07:39 yS1   fax_wait_for: string '+FHNG: 54'
06/09 18:07:39 yS1  connection hangup: '+FHNG: 54'
06/09 18:07:39 yS1   (No response to EOP repeated 3 times)
06/09 18:07:39 yS1   fax_wait_for: string 'OK'** found **
06/09 18:07:39 ##### failed transmitting f1.g3: phone="351062", +FHS:54,
dev=tt

06/09 18:07:39 yS1  fax_send: 'AT+FCLASS=0'
06/09 18:07:40 yS1   removing lock file