modem hangs up FHNG:0 while sending the 2nd (or 3rd) page
igorpesando@my-deja.com (igorpesando@my-deja.com)
Mon, 28 Jun 1999 21:29:17 GMT
Hello everybody,
I'm having troubles with my PCMCIA card that
responds to at+fmfr? with
56K V.90 Modem PCMCIA p73198a
Looking in the driver for windog I've found the
following further informations:; Windows Modem
Setup File
; Copyright 1997 LT
; Manufacturer: LT Microelectronics
;02/26/98 added: Modem1 ="Lucent Venus Modem"
; 03/02/98 -- Added V90 connection rates
I've read the FAQ and the manual but I haven't
found any clue on how to
solve my problems both in sending and in
receiving faxes ('+FHNG:72') .
I send the log of two attempts in sending where
I've tried to send 2
or more pages.
While in the first attempt I more or less succeded
in sending two pages, in
the second I could send only one page. The remote
fax machine is always
the same.
I should add the under windog it works :-(.
Thanks in advance,
Ciao
Igor
#############################################################################
First fax with a more or less successful sending
of the second page
#############################################################################
06/25 11:35:30 sendfax.c compiled at Apr 6
1999, 12:53:51
06/25 11:35:30 tss: set speed to 38400 (017)
06/25 11:35:30 tio_set_flow_control( HARD )
...
06/25 11:35:30 yS2 conf lib: read: 'speed 19200'
06/25 11:35:30 yS2 conf lib:read:'ignore-carrier
true'
...
06/25 11:35:30 yS2 mdm_send: 'ATV1Q0'
06/25 11:35:30 yS2 mdm_command: string 'ATV1Q0'
06/25 11:35:30 yS2 mdm_command: string 'OK' ->
OK
06/25 11:35:30 yS2 mdm_send: 'AT+FCLASS=2'
06/25 11:35:30 yS2 mdm_command: string
'AT+FCLASS=2'
06/25 11:35:30 yS2 mdm_command: string 'OK' ->
OK
06/25 11:35:30 yS2 mdm_send: 'AT+FLID="+39
011350955"'
06/25 11:35:30 yS2 mdm_command: string
'AT+FLID="+39 011350955"'
06/25 11:35:30 yS2 mdm_command: string 'OK' ->
OK
06/25 11:35:31 yS2 mdm_send:
'AT+FDCC=0,5,0,2,0,0,0,0'
06/25 11:35:31 yS2 mdm_command: string
'AT+FDCC=0,5,0,2,0,0,0,0'
06/25 11:35:31 yS2 mdm_command: string 'OK' ->
OK
06/25 11:35:31 yS2 mdm_send: 'AT+FBOR=0'
06/25 11:35:31 yS2 mdm_command: string
'AT+FBOR=0'
06/25 11:35:31 yS2 mdm_command: string 'OK' ->
OK
06/25 11:35:31 yS2 fax_send: 'ATDP7214'
06/25 11:35:31 yS2 fax_wait_for(OK)
06/25 11:35:31 yS2 fax_wait_for: string
'ATDP7214'
06/25 11:35:52 yS2 fax_wait_for: string '+FCON'
06/25 11:35:52 yS2 fax_wait_for: string
'+FCSI:" 0116707214"'
06/25 11:35:52 yS2 fax_id: '+FCSI:"
0116707214"'
06/25 11:35:53 yS2 fax_wait_for: string
'+FDIS:1,5,0,2,0,0,0,3'
06/25 11:35:53 yS2 fax_wait_for: string 'OK'**
found **
06/25 11:35:53 yS2 sendfax: IGNORE DCD (carrier)
status
06/25 11:35:53 yS2 fax_send_page("f1.g3")
started...
06/25 11:35:53 yS2 tio_set_flow_control( HARD )
06/25 11:35:53 yS2 fax_send: 'AT+FDT'
06/25 11:35:53 yS2 fax_wait_for(CONNECT)
06/25 11:35:53 yS2 fax_wait_for: string 'AT+FDT'
06/25 11:36:00 yS2 fax_wait_for: string
'+FDCS:0,5,0,2,0,0,0,3'
06/25 11:36:00 yS2 transmission par.:
'+FDCS:0,5,0,2,0,0,0,3'
06/25 11:36:00 yS2 fax_wait_for: string
'CONNECT'** found **
06/25 11:36:00 yS2 waiting for XON, got:[0a][11]
06/25 11:36:00 yS2 tio_set_flow_control( HARD
XON_OUT )
06/25 11:36:00 yS2 sending f1.g3...
06/25 11:36:00 yS2 page complete, 5392 bytes sent
06/25 11:36:00 yS2 sending DLE ETX...
06/25 11:36:00 yS2 fax_wait_for(OK)
06/25 11:36:12 yS2 fax_wait_for: string 'OK'**
found **
06/25 11:36:12 yS2 fax_send: 'AT+FET=0'
06/25 11:36:12 yS2 fax_wait_for(OK)
06/25 11:36:12 yS2 fax_wait_for: string
'AT+FET=0'
06/25 11:36:15 yS2 fax_wait_for: string
'+FPTS:1'
06/25 11:36:15 yS2 page status: +FPTS:1
06/25 11:36:15 yS2 fax_wait_for: string 'OK'**
found **
06/25 11:36:15 yS2 fax_send_page("f2.g3")
started...
06/25 11:36:15 yS2 tio_set_flow_control( HARD )
06/25 11:36:16 yS2 fax_send: 'AT+FDT'
06/25 11:36:16 yS2 fax_wait_for(CONNECT)
06/25 11:36:16 yS2 fax_wait_for: string 'AT+FDT'
06/25 11:36:16 yS2 fax_wait_for: string
'CONNECT'** found **
06/25 11:36:16 yS2 waiting for XON, got:[0a][11]
06/25 11:36:16 yS2 tio_set_flow_control( HARD
XON_OUT )
06/25 11:36:16 yS2 sending f2.g3...
06/25 11:36:23 yS2 page complete, 13461 bytes
sent
06/25 11:36:23 yS2 sending DLE ETX...
06/25 11:36:23 yS2 fax_wait_for(OK)
06/25 11:36:40 yS2 fax_wait_for: string
'+FPTS:1'
06/25 11:36:40 yS2 page 06/25 11:36:41 yS2
fax_wait_for: string '+FHNG:0'
06/25 11:36:41 yS2 connection hangup: '+FHNG:0'
06/25 11:36:41 yS2 (Normal and proper end of
connection)
06/25 11:36:42 yS2 fax_wait_for: string 'OK'**
found **
06/25 11:36:42 yS2 fax_send: 'AT+FET=2'
06/25 11:36:42 yS2 fax_wait_for(OK): already
hangup!
06/25 11:36:42 ##### failed transmitting f2.g3:
phone="7214", +FHS:00, dev=ttyS2, time=71s,
acct=""
06/25 11:36:42 yS2 fax_send: 'AT+FCLASS=0'
#############################################################################
#############################################################################
Second fax with unsuccessful sending of the second
page due to ???
#############################################################################
06/28 10:34:23 yS2 sendfax: IGNORE DCD (carrier)
status
06/28 10:34:23 yS2 fax_send_page("f1.g3")
started...
06/28 10:34:23 yS2 tio_set_flow_control( HARD )
06/28 10:34:23 yS2 fax_send: 'AT+FDT'
06/28 10:34:23 yS2 fax_wait_for(CONNECT)
06/28 10:34:23 yS2 fax_wait_for: string 'AT+FDT'
06/28 10:34:30 yS2 fax_wait_for: string
'+FDCS:0,5,0,2,0,0,0,3'
06/28 10:34:30 yS2 transmission par.:
'+FDCS:0,5,0,2,0,0,0,3'
06/28 10:34:30 yS2 fax_wait_for: string
'CONNECT'** found **
status: +FPTS:1
06/28 10:34:30 yS2 waiting for XON, got:[0a][11]
06/28 10:34:30 yS2 tio_set_flow_control( HARD
XON_OUT )
06/28 10:34:30 yS2 sending f1.g3...
06/28 10:34:30 yS2 page complete, 5193 bytes sent
06/28 10:34:30 yS2 sending DLE ETX...
06/28 10:34:30 yS2 fax_wait_for(OK)
06/28 10:34:51 yS2 fax_wait_for: string
'+FPTS:1'
06/28 10:34:51 yS2 page status: +FPTS:1
06/28 10:34:52 yS2 fax_wait_for: string
'+FHNG:0'
06/28 10:34:52 yS2 connection hangup: '+FHNG:0'
06/28 10:34:52 yS2 (Normal and proper end of
connection)
06/28 10:34:53 yS2 fax_wait_for: string 'OK'**
found **
06/28 10:34:53 yS2 fax_send: 'AT+FET=0'
06/28 10:34:53 yS2 fax_wait_for(OK): already
hangup!
06/28 10:34:53 ##### failed transmitting f1.g3:
phone="7214", +FHS:00, dev=ttyS2, time=52s,
acct=""
06/28 10:34:53 yS2 fax_send: 'AT+FCLASS=0'
06/28 10:34:54 yS2 removing lock file
Sent via Deja.com http://www.deja.com/
Share what you know. Learn what you don't.