Courier v.Everything - can't receive fax

• Messages sorted by:[ date ][ thread ][ subject ][ author ]

Hi all,

I have just installed a Courier v.Everything modem which is working 100%
as a ppp dialin server. However, it doesn't seem to be able to recognise
a fax call, when a connection is attempted from a fax machine, a NO
CARRIER is returned as follows:

09/18 02:46:37 yR1 waiting for ``RING''
09/18 02:46:37 yR1 got: [0d][0a]RING ** found **
09/18 02:46:37 yR1 send: ATA[0d]
09/18 02:46:37 yR1 waiting for ``CONNECT''
09/18 02:46:37 yR1 got: [0d][0a]ATA[0d][0d][0a]NO CARRIER
09/18 02:46:54 yR1 found action string: ``NO CARRIER''
09/18 02:46:54 ##### failed A_FAIL dev=ttyR1, pid=1369, caller=none,
conn='', na
me=''

I was wondering what configuration is needed for mgetty to tell the
modem to answer fax calls.

The following conversation happens when the modem is configured. Will
this config accept a fax?

09/18 02:45:01 yR1 tio_get_rs232_lines: status: RTS CTS DSR DTR
09/18 02:45:01 yR1 lowering DTR to reset Modem
09/18 02:45:02 yR1 tss: set speed to 57600 (10001)
09/18 02:45:02 yR1 tio_set_flow_control( HARD )
09/18 02:45:02 yR1 waiting for line to clear (VTIME), read: 
09/18 02:45:02 yR1 send: AT&H1&B1[0d]
09/18 02:45:02 yR1 waiting for ``OK''
09/18 02:45:02 yR1 got: AT&H1&B1[0d][0d][0a]OK ** found **
09/18 02:45:02 yR1 mdm_send: 'AT+FCLASS=2.0'
09/18 02:45:02 yR1 mdm_command: string 'AT+FCLASS=2.0'
09/18 02:45:02 yR1 mdm_command: string 'OK' -> OK
09/18 02:45:02 yR1 mdm_send: 'AT+FAA=1;+FCR=1'
09/18 02:45:02 yR1 mdm_command: string 'AT+FAA=1;+FCR=1'
09/18 02:45:02 yR1 mdm_command: string 'OK' -> OK
09/18 02:45:02 yR1 mdm_send: 'AT+FBO=1'
09/18 02:45:02 yR1 mdm_command: string 'AT+FBO=1'
09/18 02:45:02 yR1 mdm_command: string 'OK' -> OK
09/18 02:45:02 yR1 mdm_send: 'AT+FNR=1,1,1,0'
09/18 02:45:03 yR1 mdm_command: string 'AT+FNR=1,1,1,0'
09/18 02:45:03 yR1 mdm_command: string 'OK' -> OK
09/18 02:45:03 yR1 mdm_send: 'AT+FLI="27 11 466 1365"'
09/18 02:45:03 yR1 mdm_command: string 'AT+FLI="27 11 466 1365"'
09/18 02:45:03 yR1 mdm_command: string 'OK' -> OK
09/18 02:45:03 yR1 mdm_send: 'AT+FCC=1,5,0,2,0,0,0,0'
09/18 02:45:03 yR1 mdm_command: string 'AT+FCC=1,5,0,2,0,0,0,0'
09/18 02:45:03 yR1 mdm_command: string 'OK' -> OK
09/18 02:45:03 yR1 waiting for line to clear (VTIME), read: 
09/18 02:45:03 yR1 removing lock file
09/18 02:45:03 yR1 waiting...
09/18 02:46:37 yR1 checking lockfiles, locking the line
09/18 02:46:37 yR1 makelock(ttyR1) called
09/18 02:46:37 yR1 do_makelock: lock='/var/lock/LCK..ttyR1'
09/18 02:46:37 yR1 lock made
09/18 02:46:37 yR1 waiting for ``RING''

Any ideas?

Regards,
Graham
-- 
-----------------------------------------
graham@vwv.com			"There's a moon
VWV Interactive				over Bourbon Street
						tonight...
.