mvm problems

root (root@m2a.studzone.net)
Mon, 7 Sep 1998 06:31:34 +0200
Messages sorted by:[ date ][ thread ][ subject ][ author ]
Hello All,

Mark Robinson here. I can't get MVM working, been working on it for a week.
I run Debian 2.0, on a system with two modems, on ttyS0 and ttyS1. They are
both Archtek 5634BTS modems. The debian mgetty package would not work with my
modems, some investigation led me to the US_Robotics.c file in
mgetty/voice/libvoice (1.1.17). I changed the VLS setting for internal speaker
in US_Robotics.c to 2 from 6, and vgetty works fine. An "ati4" in minicom
yields the following:


Texas Instruments RK 56000 Voice Fax Settings...

   B0  E1  F1  L2  M1  Q0  V1  X1  Y0
   BAUD=57600  PARITY=N  WORDLEN=8
   DIAL=TONE    ON HOOK   CID=0

   &A1  &B0  &C1  &D2  &G0  &H0  &I0  &K1
   &M4  &N0  &P0  &R1  &S0  &T5  &U0  &Y1

   S00=000  S01=000  S02=043  S03=013  S04=010  S05=008  S06=002
   S07=060  S08=002  S09=006  S10=014  S11=070  S12=050  S13=000
   S15=000  S16=000  S18=000  S19=000  S21=010  S22=017  S23=019
   S25=005  S27=000  S28=008  S29=020  S30=000  S31=128  S32=002
   S33=000  S34=000  S35=004  S36=014  S38=000  S39=000  S40=001
   S41=000  S42=000

 When I dial the ttyS0 modem, the modem answers the line, but I get no
greeting message, in fact no answer at all. I am using the rsynth that came
with the debian package, I could not get the patch included with mvm to patch
the rsynth source. My modem will not play the greeting file that I specified
in the Index file, but I can play it manually with vm play. The following is
from my last attempt at a dial-in:

09/06 23:31:02 yS0    vgetty: answer mode was set directly
09/06 23:31:02 yS0    vgetty: answer mode is [data|fax|voice]
09/06 23:31:02 yS0    vgetty: opening list file /var/spool/voice/messages/Index
09/06 23:31:02 yS0    vgetty: found 1 messages, picked message number 1
09/06 23:31:02 yS0    vgetty: message name is /var/spool/voice/messages/greeting
09/06 23:31:02 yS0   vgetty: entering voice mode
09/06 23:31:02 yS0   vgetty: Installing signal handlers
09/06 23:31:02 yS0   voice command: 'AT#CLS?' -> ''
09/06 23:31:02 yS0    vgetty: AT#CLS?
09/06 23:31:02 yS0    US Robotics: 2.0
09/06 23:31:03 yS0   voice command: '' -> 'OK'
09/06 23:31:03 yS0    US Robotics: OK
09/06 23:31:03 yS0   voice command: 'AT#CLS=8' -> 'OK'
09/06 23:31:03 yS0    vgetty: AT#CLS=8
09/06 23:31:03 yS0    US Robotics: OK
09/06 23:31:03 yS0   voice command: 'AT' -> 'OK'
09/06 23:31:03 yS0    vgetty: AT
09/06 23:31:03 yS0    US Robotics: OK
09/06 23:31:03 yS0    vgetty: queued event RESET_WATCHDOG at position 0001
09/06 23:31:03 yS0   voice command: 'AT#VLS=0' -> 'OK|VCON'
09/06 23:31:03 yS0    vgetty: AT#VLS=0
09/06 23:31:03 yS0    vgetty: unqueued event RESET_WATCHDOG at position 0001
09/06 23:31:03 yS0    vgetty: voice_handle_event got event RESET_WATCHDOG with data <
09/06 23:31:03 yS0    US Robotics: OK
09/06 23:31:03 yS0   voice command: 'AT#VLS=4A' -> 'VCON'
09/06 23:31:04 yS0    vgetty: AT#VLS=4A
09/06 23:31:04 yS0    US Robotics: VCON
09/06 23:31:04 yS0  vgetty: Executing shell script /usr/lib/mgetty/mvm_vgetty_script.sh with shell /bin/sh
09/06 23:31:04 yS0    vgetty: opening pipes
09/06 23:31:04 yS0    vgetty: forking shell
09/06 23:31:04 yS0   vgetty(0): HELLO SHELL
09/06 23:31:04 yS0    vgetty: Got pipe signal
09/06 23:31:04 yS0    vgetty: queued event SIGNAL_SIGPIPE at position 0002
09/06 23:31:04 yS0    vgetty: unqueued event SIGNAL_SIGPIPE at position 0002
09/06 23:31:04 yS0    vgetty: voice_handle_event got event SIGNAL_SIGPIPE with data <
09/06 23:31:04 yS0   shell(1): HELLO VOICE PROGRAM
09/06 23:31:04 yS0   vgetty(1): READY
09/06 23:31:04 yS0   vgetty: initialized communication
09/06 23:31:04 yS0    vgetty: Got pipe signal
09/06 23:31:04 yS0    vgetty: queued event SIGNAL_SIGPIPE at position 0003
09/06 23:31:04 yS0    vgetty: unqueued event SIGNAL_SIGPIPE at position 0003
09/06 23:31:04 yS0    vgetty: voice_handle_event got event SIGNAL_SIGPIPE with data <
09/06 23:31:04 yS0   shell(1): ENABLE EVENTS
09/06 23:31:04 yS0   vgetty(1): READY
09/06 23:31:04 yS0    vgetty: Got pipe signal
09/06 23:31:04 yS0    vgetty: queued event SIGNAL_SIGPIPE at position 0004
09/06 23:31:04 yS0    vgetty: unqueued event SIGNAL_SIGPIPE at position 0004
09/06 23:31:04 yS0    vgetty: voice_handle_event got event SIGNAL_SIGPIPE with data <
09/06 23:31:04 yS0   shell(1): AUTOSTOP ON
09/06 23:31:04 yS0   vgetty(1): READY
09/06 23:31:04 yS0    vgetty: Got pipe signal
09/06 23:31:04 yS0    vgetty: queued event SIGNAL_SIGPIPE at position 0005
09/06 23:31:04 yS0    vgetty: unqueued event SIGNAL_SIGPIPE at position 0005
09/06 23:31:04 yS0    vgetty: voice_handle_event got event SIGNAL_SIGPIPE with data <
09/06 23:31:04 yS0   shell(1): PLAY /var/spool/voice/messages/select_language
09/06 23:31:04 yS0   vgetty(1): PLAYING
09/06 23:31:04 yS0  playing voice file /var/spool/voice/messages/select_language
09/06 23:31:04 yS0   vgetty: raw modem data header found
09/06 23:31:04 yS0   vgetty: modem type US Robotics found
09/06 23:31:04 yS0   vgetty: compression method 0x0001, speed 8000, bits 1
09/06 23:31:04 yS0    vgetty: queued event RESET_WATCHDOG at position 0006
09/06 23:31:04 yS0    vgetty: unqueued event RESET_WATCHDOG at position 0006
09/06 23:31:04 yS0    vgetty: voice_handle_event got event RESET_WATCHDOG with data <o>
09/06 23:31:04 yS0   voice command: 'AT' -> 'OK'
09/06 23:31:04 yS0    vgetty: AT
09/06 23:31:04 yS0    US Robotics: OK
09/06 23:31:04 yS0   tio_set_flow_control( HARD XON_OUT )
09/06 23:31:04 yS0   voice command: 'ATE0#VTX' -> 'CONNECT'
09/06 23:31:04 yS0    vgetty: ATE0#VTX
09/06 23:31:04 yS0    US Robotics: CONNECT
09/06 23:31:04 yS0    vgetty: <VOICE DATA 1938 bytes>
09/06 23:31:04 yS0    vgetty: queued event RESET_WATCHDOG at position 0007
09/06 23:31:04 yS0    vgetty: unqueued event RESET_WATCHDOG at position 0007
09/06 23:31:04 yS0    vgetty: voice_handle_event got event RESET_WATCHDOG with data <o>
09/06 23:31:04 yS0    vgetty: <STOP PLAY>
09/06 23:31:04 yS0   voice command: '' -> 'OK|VCON'
09/06 23:31:04 yS0    US Robotics: VCON
09/06 23:31:05 yS0   voice command: 'AT' -> 'OK'
09/06 23:31:06 yS0    vgetty: AT
09/06 23:31:06 yS0    US Robotics: OK
09/06 23:31:06 yS0   vgetty(1): READY
09/06 23:31:06 yS0    vgetty: Got pipe signal
09/06 23:31:06 yS0    vgetty: queued event SIGNAL_SIGPIPE at position 0008
09/06 23:31:06 yS0    vgetty: unqueued event SIGNAL_SIGPIPE at position 0008
09/06 23:31:06 yS0    vgetty: voice_handle_event got event SIGNAL_SIGPIPE with data <
09/06 23:31:06 yS0   shell(1): WAIT 20
09/06 23:31:06 yS0   vgetty(1): WAITING
09/06 23:31:06 yS0    vgetty: queued event RESET_WATCHDOG at position 0009
09/06 23:31:06 yS0    vgetty: unqueued event RESET_WATCHDOG at position 0009
09/06 23:31:06 yS0    vgetty: voice_handle_event got event RESET_WATCHDOG with data <
09/06 23:31:06 yS0    vgetty: queued event RESET_WATCHDOG at position 0010
09/06 23:31:06 yS0    vgetty: unqueued event RESET_WATCHDOG at position 0010
09/06 23:31:06 yS0    vgetty: voice_handle_event got event RESET_WATCHDOG with data <
09/06 23:31:27 yS0   vgetty(1): READY
09/06 23:31:27 yS0    vgetty: Got pipe signal
09/06 23:31:27 yS0    vgetty: queued event SIGNAL_SIGPIPE at position 0011
09/06 23:31:27 yS0    vgetty: unqueued event SIGNAL_SIGPIPE at position 0011
09/06 23:31:27 yS0    vgetty: voice_handle_event got event SIGNAL_SIGPIPE with data <
09/06 23:31:27 yS0   shell(1): STOP
09/06 23:31:27 yS0   vgetty: STOP during IDLE
09/06 23:31:27 yS0   vgetty(1): READY
09/06 23:31:27 yS0    vgetty: Got pipe signal
09/06 23:31:27 yS0    vgetty: queued event SIGNAL_SIGPIPE at position 0012
09/06 23:31:27 yS0    vgetty: unqueued event SIGNAL_SIGPIPE at position 0012
09/06 23:31:27 yS0    vgetty: voice_handle_event got event SIGNAL_SIGPIPE with data <
09/06 23:31:27 yS0   shell(1): PLAY /var/spool/voice/messages/welcome_here
09/06 23:31:27 yS0   vgetty(1): PLAYING
09/06 23:31:27 yS0  playing voice file /var/spool/voice/messages/welcome_here
09/06 23:31:27 yS0   vgetty: raw modem data header found
09/06 23:31:27 yS0   vgetty: modem type US Robotics found
09/06 23:31:27 yS0   vgetty: compression method 0x0001, speed 8000, bits 1
09/06 23:31:27 yS0    vgetty: queued event RESET_WATCHDOG at position 0013
09/06 23:31:27 yS0    vgetty: unqueued event RESET_WATCHDOG at position 0013
09/06 23:31:27 yS0    vgetty: voice_handle_event got event RESET_WATCHDOG with data <o>
09/06 23:31:27 yS0   voice command: 'AT' -> 'OK'
09/06 23:31:27 yS0    vgetty: AT
09/06 23:31:27 yS0    US Robotics: OK
09/06 23:31:27 yS0   tio_set_flow_control( HARD XON_OUT )
09/06 23:31:27 yS0   voice command: 'ATE0#VTX' -> 'CONNECT'
09/06 23:31:27 yS0    vgetty: ATE0#VTX
09/06 23:31:27 yS0    US Robotics: CONNECT
09/06 23:31:27 yS0    vgetty: <VOICE DATA 1938 bytes>
09/06 23:31:27 yS0    vgetty: queued event RESET_WATCHDOG at position 0014
09/06 23:31:27 yS0    vgetty: unqueued event RESET_WATCHDOG at position 0014
09/06 23:31:27 yS0    vgetty: voice_handle_event got event RESET_WATCHDOG with data <o>
09/06 23:31:27 yS0    vgetty: <STOP PLAY>
09/06 23:31:27 yS0   voice command: '' -> 'OK|VCON'
09/06 23:31:27 yS0    US Robotics: VCON
09/06 23:31:28 yS0   voice command: 'AT' -> 'OK'
09/06 23:31:28 yS0    vgetty: AT
09/06 23:31:28 yS0    US Robotics: OK
09/06 23:31:28 yS0   vgetty(1): READY
09/06 23:31:28 yS0    vgetty: Got pipe signal
09/06 23:31:28 yS0    vgetty: queued event SIGNAL_SIGPIPE at position 0015
09/06 23:31:28 yS0    vgetty: unqueued event SIGNAL_SIGPIPE at position 0015
09/06 23:31:28 yS0    vgetty: voice_handle_event got event SIGNAL_SIGPIPE with data <
09/06 23:31:28 yS0   shell(1): PLAY /var/spool/voice/main/welcome
09/06 23:31:28 yS0   vgetty(1): PLAYING
09/06 23:31:28 yS0  playing voice file /var/spool/voice/main/welcome
09/06 23:31:28 yS0   vgetty: raw modem data header found
09/06 23:31:28 yS0   vgetty: modem type US Robotics found
09/06 23:31:28 yS0   vgetty: compression method 0x0001, speed 8000, bits 1
09/06 23:31:28 yS0    vgetty: queued event RESET_WATCHDOG at position 0016
09/06 23:31:28 yS0    vgetty: unqueued event RESET_WATCHDOG at position 0016
09/06 23:31:28 yS0    vgetty: voice_handle_event got event RESET_WATCHDOG with data <o>
09/06 23:31:28 yS0   voice command: 'AT' -> 'OK'
09/06 23:31:28 yS0    vgetty: AT
09/06 23:31:28 yS0    US Robotics: OK
09/06 23:31:29 yS0   tio_set_flow_control( HARD XON_OUT )
09/06 23:31:29 yS0   voice command: 'ATE0#VTX' -> 'CONNECT'
09/06 23:31:29 yS0    vgetty: ATE0#VTX
09/06 23:31:29 yS0    US Robotics: CONNECT
09/06 23:31:29 yS0    vgetty: <VOICE DATA 1938 bytes>
09/06 23:31:29 yS0    vgetty: queued event RESET_WATCHDOG at position 0017
09/06 23:31:29 yS0    vgetty: unqueued event RESET_WATCHDOG at position 0017
09/06 23:31:29 yS0    vgetty: voice_handle_event got event RESET_WATCHDOG with data <o>
09/06 23:31:29 yS0    vgetty: <STOP PLAY>
09/06 23:31:29 yS0   voice command: '' -> 'OK|VCON'
09/06 23:31:29 yS0    US Robotics: VCON
09/06 23:31:30 yS0   voice command: 'AT' -> 'OK'
09/06 23:31:30 yS0    vgetty: AT
09/06 23:31:30 yS0    US Robotics: OK
09/06 23:31:30 yS0   vgetty(1): READY
09/06 23:31:30 yS0    vgetty: Got pipe signal
09/06 23:31:30 yS0    vgetty: queued event SIGNAL_SIGPIPE at position 0018
09/06 23:31:30 yS0    vgetty: unqueued event SIGNAL_SIGPIPE at position 0018
09/06 23:31:30 yS0    vgetty: voice_handle_event got event SIGNAL_SIGPIPE with data <
09/06 23:31:30 yS0   shell(1): WAIT 20
09/06 23:31:30 yS0   vgetty(1): WAITING
09/06 23:31:30 yS0    vgetty: queued event RESET_WATCHDOG at position 0019
09/06 23:31:30 yS0    vgetty: unqueued event RESET_WATCHDOG at position 0019
09/06 23:31:30 yS0    vgetty: voice_handle_event got event RESET_WATCHDOG with data <
09/06 23:31:30 yS0    vgetty: queued event RESET_WATCHDOG at position 0020
09/06 23:31:30 yS0    vgetty: unqueued event RESET_WATCHDOG at position 0020
09/06 23:31:30 yS0    vgetty: voice_handle_event got event RESET_WATCHDOG with data <
09/06 23:31:51 yS0   vgetty(1): READY
09/06 23:31:51 yS0    vgetty: Got pipe signal
09/06 23:31:51 yS0    vgetty: queued event SIGNAL_SIGPIPE at position 0021
09/06 23:31:51 yS0    vgetty: unqueued event SIGNAL_SIGPIPE at position 0021
09/06 23:31:51 yS0    vgetty: voice_handle_event got event SIGNAL_SIGPIPE with data <
09/06 23:31:51 yS0   shell(1): STOP
09/06 23:31:51 yS0   vgetty: STOP during IDLE
09/06 23:31:51 yS0   vgetty(1): READY
09/06 23:31:51 yS0    vgetty: Got pipe signal
09/06 23:31:51 yS0    vgetty: queued event SIGNAL_SIGPIPE at position 0022
09/06 23:31:51 yS0    vgetty: unqueued event SIGNAL_SIGPIPE at position 0022
09/06 23:31:51 yS0    vgetty: voice_handle_event got event SIGNAL_SIGPIPE with data <
09/06 23:31:51 yS0   shell(1): PLAY /var/spool/voice/main/welcome
09/06 23:31:51 yS0   vgetty(1): PLAYING
09/06 23:31:51 yS0  playing voice file /var/spool/voice/main/welcome
09/06 23:31:51 yS0   vgetty: raw modem data header found
09/06 23:31:51 yS0   vgetty: modem type US Robotics found
09/06 23:31:51 yS0   vgetty: compression method 0x0001, speed 8000, bits 1
09/06 23:31:51 yS0    vgetty: queued event RESET_WATCHDOG at position 0023
09/06 23:31:51 yS0    vgetty: unqueued event RESET_WATCHDOG at position 0023
09/06 23:31:51 yS0    vgetty: voice_handle_event got event RESET_WATCHDOG with data <o>
09/06 23:31:51 yS0   voice command: 'AT' -> 'OK'
09/06 23:31:51 yS0    vgetty: AT
09/06 23:31:51 yS0    US Robotics: OK
09/06 23:31:51 yS0   tio_set_flow_control( HARD XON_OUT )
09/06 23:31:51 yS0   voice command: 'ATE0#VTX' -> 'CONNECT'
09/06 23:31:51 yS0    vgetty: ATE0#VTX
09/06 23:31:51 yS0    US Robotics: CONNECT
09/06 23:31:51 yS0    vgetty: <VOICE DATA 1938 bytes>
09/06 23:31:51 yS0    vgetty: queued event RESET_WATCHDOG at position 0024
09/06 23:31:51 yS0    vgetty: unqueued event RESET_WATCHDOG at position 0024
09/06 23:31:51 yS0    vgetty: voice_handle_event got event RESET_WATCHDOG with data <o>
09/06 23:31:51 yS0    vgetty: <STOP PLAY>
09/06 23:31:51 yS0   voice command: '' -> 'OK|VCON'
09/06 23:31:51 yS0    US Robotics: VCON
09/06 23:31:52 yS0   voice command: 'AT' -> 'OK'
09/06 23:31:52 yS0    vgetty: AT
09/06 23:31:52 yS0    US Robotics: OK
09/06 23:31:52 yS0   vgetty(1): READY
09/06 23:31:52 yS0    vgetty: Got pipe signal
09/06 23:31:52 yS0    vgetty: queued event SIGNAL_SIGPIPE at position 0025
09/06 23:31:52 yS0    vgetty: unqueued event SIGNAL_SIGPIPE at position 0025
09/06 23:31:52 yS0    vgetty: voice_handle_event got event SIGNAL_SIGPIPE with data <
09/06 23:31:52 yS0   shell(1): WAIT 20
09/06 23:31:52 yS0   vgetty(1): WAITING
09/06 23:31:52 yS0    vgetty: queued event RESET_WATCHDOG at position 0026
09/06 23:31:52 yS0    vgetty: unqueued event RESET_WATCHDOG at position 0026
09/06 23:31:52 yS0    vgetty: voice_handle_event got event RESET_WATCHDOG with data <
09/06 23:31:52 yS0    vgetty: queued event RESET_WATCHDOG at position 0027
09/06 23:31:52 yS0    vgetty: unqueued event RESET_WATCHDOG at position 0027
09/06 23:31:52 yS0    vgetty: voice_handle_event got event RESET_WATCHDOG with data <
09/06 23:32:11 yS0    US Robotics: <DLE> <d>
09/06 23:32:11 yS0    vgetty: queued event DIAL_TONE at position 0028
09/06 23:32:11 yS0    vgetty: unqueued event DIAL_TONE at position 0028
09/06 23:32:11 yS0    vgetty: voice_handle_event got event DIAL_TONE with data <
09/06 23:32:11 yS0   vgetty(1): DIAL_TONE
09/06 23:32:11 yS0    vgetty: Got pipe signal
09/06 23:32:11 yS0    vgetty: queued event SIGNAL_SIGPIPE at position 0029
09/06 23:32:11 yS0    vgetty: unqueued event SIGNAL_SIGPIPE at position 0029
09/06 23:32:11 yS0    vgetty: voice_handle_event got event SIGNAL_SIGPIPE with data <
09/06 23:32:11 yS0   shell(2): STOP
09/06 23:32:11 yS0   vgetty(1): READY
09/06 23:32:11 yS0    vgetty: Got pipe signal
09/06 23:32:11 yS0    vgetty: queued event SIGNAL_SIGPIPE at position 0030
09/06 23:32:11 yS0    vgetty: unqueued event SIGNAL_SIGPIPE at position 0030
09/06 23:32:11 yS0    vgetty: voice_handle_event got event SIGNAL_SIGPIPE with data <
09/06 23:32:11 yS0   shell(1): PLAY /var/spool/voice/messages/crashed
09/06 23:32:11 yS0   vgetty(1): PLAYING
09/06 23:32:11 yS0  playing voice file /var/spool/voice/messages/crashed
09/06 23:32:11 yS0   vgetty: raw modem data header found
09/06 23:32:11 yS0   vgetty: modem type US Robotics found
09/06 23:32:11 yS0   vgetty: compression method 0x0001, speed 8000, bits 1
09/06 23:32:11 yS0    vgetty: queued event RESET_WATCHDOG at position 0031
09/06 23:32:11 yS0    vgetty: unqueued event RESET_WATCHDOG at position 0031
09/06 23:32:11 yS0    vgetty: voice_handle_event got event RESET_WATCHDOG with data <o>
09/06 23:32:11 yS0   voice command: 'AT' -> 'OK'
09/06 23:32:12 yS0    vgetty: AT
09/06 23:32:12 yS0    US Robotics: OK
09/06 23:32:12 yS0   tio_set_flow_control( HARD XON_OUT )
09/06 23:32:12 yS0   voice command: 'ATE0#VTX' -> 'CONNECT'
09/06 23:32:12 yS0    vgetty: ATE0#VTX
09/06 23:32:12 yS0    US Robotics: CONNECT
09/06 23:32:12 yS0    vgetty: <VOICE DATA 1938 bytes>
09/06 23:32:12 yS0    vgetty: queued event RESET_WATCHDOG at position 0032
09/06 23:32:12 yS0    vgetty: unqueued event RESET_WATCHDOG at position 0032
09/06 23:32:12 yS0    vgetty: voice_handle_event got event RESET_WATCHDOG with data <o>
09/06 23:32:12 yS0    vgetty: <STOP PLAY>
09/06 23:32:12 yS0   voice command: '' -> 'OK|VCON'
09/06 23:32:12 yS0    US Robotics: VCON
09/06 23:32:13 yS0   voice command: 'AT' -> 'OK'
09/06 23:32:13 yS0    vgetty: AT
09/06 23:32:13 yS0    US Robotics: OK
09/06 23:32:13 yS0   vgetty(1): READY
09/06 23:32:13 yS0    vgetty: Got pipe signal
09/06 23:32:13 yS0    vgetty: queued event SIGNAL_SIGPIPE at position 0033
09/06 23:32:13 yS0    vgetty: unqueued event SIGNAL_SIGPIPE at position 0033
09/06 23:32:13 yS0    vgetty: voice_handle_event got event SIGNAL_SIGPIPE with data <
09/06 23:32:13 yS0   shell(1): GOODBYE
09/06 23:32:13 yS0   vgetty(1): GOODBYE SHELL
09/06 23:32:13 yS0    vgetty: Got child changed status signal
09/06 23:32:13 yS0    vgetty: queued event SIGNAL_SIGCHLD at position 0034
09/06 23:32:13 yS0   vgetty: shell exited normally with status 0x0000
09/06 23:32:13 yS0    vgetty: queued event RESET_WATCHDOG at position 0035
09/06 23:32:13 yS0   voice command: 'AT#VLS=0H0' -> 'OK|VCON'
09/06 23:32:13 yS0    vgetty: AT#VLS=0H0
09/06 23:32:13 yS0    vgetty: unqueued event SIGNAL_SIGCHLD at position 0034
09/06 23:32:13 yS0    vgetty: voice_handle_event got event SIGNAL_SIGCHLD with data <
09/06 23:32:13 yS0  vgetty: voice_handle_event got unknown event SIGNAL_SIGCHLD with data <
09/06 23:32:13 yS0    vgetty: unqueued event RESET_WATCHDOG at position 0035
09/06 23:32:13 yS0    vgetty: voice_handle_event got event RESET_WATCHDOG with data <
09/06 23:32:13 yS0    US Robotics: OK
09/06 23:32:13 yS0   vgetty: leaving voice mode
09/06 23:32:13 yS0   voice command: 'AT#CLS=2.0' -> 'OK'
09/06 23:32:14 yS0    vgetty: AT#CLS=2.0
09/06 23:32:14 yS0    US Robotics: OK
09/06 23:32:14 yS0   voice command: 'AT' -> 'OK'
09/06 23:32:14 yS0    vgetty: AT
09/06 23:32:14 yS0    US Robotics: OK
09/06 23:32:14 yS0   vgetty: Restoring signal handlers
09/06 23:32:14 yS0  closing voice modem device
09/06 23:32:14 yS0   removing lock file

At the top of this excerpt, it says I set the modem to answer data first, I
can't find that in my mgetty.conf, or voice.conf.

I'm totally stumped. If anyone has a clue, please post it, I have done all I
can here. 


Thanks,

Mark Robinson