mgetty fails at end of page

• Messages sorted by:[ date ][ thread ][ subject ][ author ]

Hi all,

I´ve looked through the FAQ I got with the mgetty distribution and I
looked in the documentation that comes with it but I can not find the
answer to the small problem I have when I use sendfax. Basically the
program fails at the end of the first page with +FHS:54 for one page
faxed and +FHS:52 for multiple pages only one page sent). I have
attached the (slightly edited) log below. I created the g3 file using gv
3.5.8 with the DEVICE faxg3.

Can anyone give me a helping leg up? 

		Regards, Richard


--
09/08 17:50:23  sendfax: experimental test release 1.1.14-Apr02
09/08 17:50:23   sendfax.c compiled at Sep  8 1998, 13:09:23
09/08 17:50:23  sending fax to 0531372572
09/08 17:50:23  checking /tmp/car.g3.1
09/08 17:50:23   makelock(ttyS1) called
09/08 17:50:23   do_makelock: lock='/var/lock/LCK..ttyS1'
09/08 17:50:23   lock made
09/08 17:50:23   tss: set speed to 38400 (017)
09/08 17:50:23   tio_set_flow_control( )
09/08 17:50:23 yS1   fax_open_device succeeded, ttyS1 -> 4
09/08 17:50:23 yS1   reading specific data for port 'ttyS1'
09/08 17:50:23 yS1   reading
/usr/local/etc/mgetty+sendfax/sendfax.config...
09/08 17:50:23 yS1   conf lib: read: 'verbose y'
09/08 17:50:23 yS1   conf lib: read: 'debug 5'
09/08 17:50:23 yS1   conf lib: read: 'fax-devices /dev/ttyS1'
09/08 17:50:23 yS1   conf lib: read: 'fax-id 49 7304 919721'
09/08 17:50:23 yS1   conf lib: read: 'max-tries 3'
09/08 17:50:23 yS1   conf lib: read: 'max-tries-continue y'
09/08 17:50:23 yS1   tss: set speed to 38400 (017)
...
09/08 17:50:23 yS1  additional info: 'U.S. Robotics Sportster
MessagePlus 56000 Rev. 11.1.18'
...
09/08 17:50:24 yS1  mdm_send: 'AT+FCLASS=2.0'
09/08 17:50:24 yS1   mdm_command: string 'OK' -> OK
...
09/08 17:50:50 yS1   fax_wait_for: string '+FIS:1,3,0,2,1,0,0,4'
09/08 17:50:50 yS1   fax_wait_for: string 'OK'** found **
09/08 17:50:50 yS1  sendfax: IGNORE DCD (carrier) status
09/08 17:50:50 yS1   fax_send_page("/tmp/car.g3.1") started...
09/08 17:50:50 yS1   tio_set_flow_control( )
09/08 17:50:50 yS1  fax_send: 'AT+FDT'
09/08 17:50:50 yS1  fax_wait_for(CONNECT)
09/08 17:50:50 yS1   fax_wait_for: string '+FCS:1,3,0,2,0,0,0,0'
09/08 17:50:50 yS1  transmission par.: '+FCS:1,3,0,2,0,0,0,0'
09/08 17:50:55 yS1   fax_wait_for: string 'CONNECT'** found **
09/08 17:50:55 yS1   tio_set_flow_control( XON_OUT )
09/08 17:50:55 yS1  sending /tmp/car.g3.1...
09/08 17:51:06 yS1  page complete, 18904 bytes sent
09/08 17:51:06 yS1  sending DLE '.'
09/08 17:51:24 yS1  connection hangup: '+FHS:54'
09/08 17:51:24 yS1   (No response to EOP repeated 3 times)
09/08 17:51:24 yS1  got response: 'OK'
09/08 17:51:24 ##### failed transmitting /tmp/car.g3.1:
phone="0531372572", +FHS:54, dev=ttyS1, time=59s, acct=""

-- 
Richard George  Carthaginem esse Delendam  R.George@george.ul.bawue.de
       Tel home : +49 7304 921707      fax home : +49 7304 919721