microlink 56kpro data / fax
Storath Julius (praxis-storath-julius@t-online.de)
Fri, 03 Sep 1999 01:54:55 +0200
Hi Gerd,
hi List
some days ago I tried hylafax on a SuSE 6.2 with faxgetty.
Reading your list and comments i deceeded to rm *hylafax* *faxgetty*.
I got the latest tar of your mgetty+sendfax and installed it.
But same strange problem.
I want mgetty to differ data and fax calls on a elsa microlink 56k pro
to send and receive fax and to do logins and ppp-logins.
but it does not work
Either fax with fax-only y in mgetty.config
or data with data-only in mgetty.config works fine
/etc/inittab entry is
mo:23:respawn:/usr/local/sbin/mgetty -s 38400 modem
no other getty proz is on the device
the link for the modem was made to the ttyE0 on a
specialix easyIO 8 Port PCI (a wonderfull hardware )
my mgetty.config for the following logs is
#general for all ports
debug 4
fax-id 49 115 unten
speed 38400
#port specific
port modem
debug 9
#fax-only n
data-only n
#fax-only y
#data-only y
----------------
using data-only n produces
log of receiver
09/03 00:33:30 dem removing lock file
--
09/03 00:33:30 dem mgetty: experimental test release 1.1.21-Jul24
09/03 00:33:30 dem check for lockfiles
09/03 00:33:30 dem checklock: stat failed, no file
09/03 00:33:30 dem locking the line
09/03 00:33:30 dem makelock(modem) called
09/03 00:33:30 dem do_makelock: lock='/var/lock/LCK..modem'
09/03 00:33:30 dem lock made
09/03 00:33:30 dem tio_get_rs232_lines: status: RTS CTS DSR DTR
09/03 00:33:30 dem lowering DTR to reset Modem
09/03 00:33:31 dem tss: set speed to 38400 (017)
09/03 00:33:31 dem tio_set_flow_control( HARD )
09/03 00:33:31 dem waiting for line to clear (VTIME),
read:[0d][0a]OK[0d][0a][0d][0a]OK[0d][0a]
09/03 00:33:31 dem send: \dATQ0V1H0[0d]
09/03 00:33:32 dem waiting for ``OK''
09/03 00:33:32 dem got: ATQ0V1H0[0d]
09/03 00:33:32 dem CND: ATQ0V1H0[0d][0a]OK ** found **
09/03 00:33:32 dem send: ATS0=0Q0&D3&C1[0d]
09/03 00:33:32 dem waiting for ``OK''
09/03 00:33:32 dem got: [0d]
09/03 00:33:32 dem CND: OK[0a]ATS0=0Q0&D3&C1[0d]
09/03 00:33:32 dem CND: ATS0=0Q0&D3&C1[0d][0a]OK ** found **
09/03 00:33:32 dem mdm_send: 'ATI'
09/03 00:33:32 dem got:[0d][0a]ATI[0d]
09/03 00:33:32 dem got:[0d][0a]282[0d]
09/03 00:33:32 dem mdm_gis: string 1: '282'
09/03 00:33:32 dem got:[0a][0d][0a]OK[0d]
09/03 00:33:32 dem mdm_identify: string '282'
09/03 00:33:32 dem ELSA MicroLink 28.8/56K series detected
09/03 00:33:32 dem mdm_send: 'ATI3'
09/03 00:33:32 dem got:[0a]ATI3[0d]
09/03 00:33:32 dem got:[0d][0a]Version 1.67 / 11.06.1999 / D[0d]
09/03 00:33:32 dem mdm_gis: string 1: 'Version 1.67 / 11.06.1999 / D'
09/03 00:33:32 dem got:[0a][0d][0a]OK[0d]
09/03 00:33:32 dem additional info: 'Version 1.67 / 11.06.1999 / D'
09/03 00:33:32 dem mdm_send: 'AT+FCLASS=2.0'
09/03 00:33:32 dem got:[0a]AT+FCLASS=2.0[0d]
09/03 00:33:32 dem mdm_command: string 'AT+FCLASS=2.0'
09/03 00:33:32 dem got:[0d][0a]OK[0d]
09/03 00:33:32 dem mdm_command: string 'OK' -> OK
09/03 00:33:32 dem mdm_send: 'AT+FAA=1;+FCR=1'
09/03 00:33:32 dem got:[0a]AT+FAA=1;+FCR=1[0d]
09/03 00:33:32 dem mdm_command: string 'AT+FAA=1;+FCR=1'
09/03 00:33:32 dem got:[0d][0a]OK[0d]
09/03 00:33:32 dem mdm_command: string 'OK' -> OK
09/03 00:33:32 dem mdm_send: 'AT+FBO=1'
09/03 00:33:32 dem got:[0a]AT+FBO=1[0d]
09/03 00:33:32 dem mdm_command: string 'AT+FBO=1'
09/03 00:33:32 dem got:[0d][0a]OK[0d]
09/03 00:33:32 dem mdm_command: string 'OK' -> OK
09/03 00:33:32 dem mdm_send: 'AT+FNR=1,1,1,0'
09/03 00:33:32 dem got:[0a]AT+FNR=1,1,1,0[0d]
09/03 00:33:32 dem mdm_command: string 'AT+FNR=1,1,1,0'
09/03 00:33:32 dem got:[0d][0a]OK[0d]
09/03 00:33:32 dem mdm_command: string 'OK' -> OK
09/03 00:33:32 dem mdm_send: 'AT+FLI="49 115 unten"'
09/03 00:33:32 dem got:[0a]AT+FLI="49 115 unten"[0d]
09/03 00:33:32 dem mdm_command: string 'AT+FLI="49 115 unten"'
09/03 00:33:32 dem got:[0d][0a]OK[0d]
09/03 00:33:32 dem mdm_command: string 'OK' -> OK
09/03 00:33:32 dem mdm_send: 'AT+FCC=1,5,0,2,0,0,0,0'
09/03 00:33:32 dem got:[0a]AT+FCC=1,5,0,2,0,0,0,0[0d]
09/03 00:33:32 dem mdm_command: string 'AT+FCC=1,5,0,2,0,0,0,0'
09/03 00:33:32 dem got:[0d][0a]OK[0d]
09/03 00:33:32 dem mdm_command: string 'OK' -> OK
09/03 00:33:32 dem waiting for line to clear (VTIME), read:
09/03 00:33:33 dem removing lock file
09/03 00:33:33 dem waiting...
09/03 00:41:46 dem select returned 1
09/03 00:41:46 dem checking lockfiles, locking the line
09/03 00:41:46 dem makelock(modem) called
09/03 00:41:46 dem do_makelock: lock='/var/lock/LCK..modem'
09/03 00:41:46 dem lock made
09/03 00:41:46 dem wfr: waiting for ``RING''
09/03 00:41:46 dem got: [0a][0d][0a]RING[0d]
09/03 00:41:46 dem CND: RING
09/03 00:41:46 dem wfr: rc=0, drn=0
09/03 00:41:46 dem send: ATA[0d]
09/03 00:41:46 dem waiting for ``CONNECT''
09/03 00:41:46 dem got: ATA[0d]
09/03 00:41:46 dem CND: OKATA[0d][0a]+FHS: <<-- for me that
means the sender hung up
09/03 00:42:50 dem found action string: ``+FHS:''
09/03 00:42:50 ##### failed A_FAIL dev=modem, pid=18488,
caller='none',conn='', name=''
09/03 00:42:50 dem removing lock file
log of sender
Sep 03 00:32:17.68: [ 4419]: SESSION BEGIN 00002633 49215116
Sep 03 00:32:17.68: [ 4419]: SEND FAX: JOB 791 DEST 16 COMMID 00002633
Sep 03 00:32:17.68: [ 4419]: MODEM set DTR OFF
Sep 03 00:32:17.68: [ 4419]: DELAY 2600 ms
Sep 03 00:32:20.29: [ 4419]: MODEM set DTR ON
Sep 03 00:32:20.29: [ 4419]: MODEM set baud rate: 38400 baud, input flow
RTS/CTS
, output flow RTS/CTS
Sep 03 00:32:20.29: [ 4419]: MODEM flush i/o
Sep 03 00:32:20.29: [ 4419]: <-- [19:AT&FE0V1Q0X3S0=0H0\r]
Sep 03 00:32:20.31: [ 4419]: --> [2:OK]
Sep 03 00:32:20.31: [ 4419]: <-- [21:ATS8=2S7=60&K3&D2&C1\r]
Sep 03 00:32:20.33: [ 4419]: --> [2:OK]
Sep 03 00:32:20.33: [ 4419]: <-- [14:AT+FCLASS=2.0\r]
Sep 03 00:32:20.34: [ 4419]: --> [2:OK]
Sep 03 00:32:20.34: [ 4419]: <-- [9:AT+FLO=2\r]
Sep 03 00:32:20.35: [ 4419]: --> [2:OK]
Sep 03 00:32:20.35: [ 4419]: <-- [9:AT+FPP=0\r]
Sep 03 00:32:20.36: [ 4419]: --> [2:OK]
Sep 03 00:32:20.36: [ 4419]: <-- [9:AT+FBO=0\r]
Sep 03 00:32:20.37: [ 4419]: --> [2:OK]
Sep 03 00:32:20.37: [ 4419]: <-- [10:AT+FCT=30\r]
Sep 03 00:32:20.38: [ 4419]: --> [2:OK]
Sep 03 00:32:20.38: [ 4419]: <-- [15:AT+FNR=1,1,1,1\r]
Sep 03 00:32:20.39: [ 4419]: --> [2:OK]
Sep 03 00:32:20.39: [ 4419]: <-- [9:AT+FIE=0\r]
Sep 03 00:32:20.40: [ 4419]: --> [2:OK]
Sep 03 00:32:20.40: [ 4419]: <-- [23:AT+FCC=1,5,2,2,0,0,0,0\r]
Sep 03 00:32:20.42: [ 4419]: --> [2:OK]
Sep 03 00:32:20.42: [ 4419]: <-- [7:ATL2M1\r]
Sep 03 00:32:20.43: [ 4419]: --> [2:OK]
Sep 03 00:32:20.43: [ 4419]: MODEM input buffering enabled
Sep 03 00:32:20.43: [ 4419]: <-- [14:AT+FCLASS=2.0\r]
Sep 03 00:32:20.54: [ 4419]: --> [2:OK]
Sep 03 00:32:20.54: [ 4419]: <-- [9:AT+FLO=2\r]
Sep 03 00:32:20.65: [ 4419]: --> [2:OK]
Sep 03 00:32:20.65: [ 4419]: <-- [9:AT+FPP=0\r]
Sep 03 00:32:20.76: [ 4419]: --> [2:OK]
Sep 03 00:32:20.76: [ 4419]: <-- [9:AT+FBO=0\r]
Sep 03 00:32:20.87: [ 4419]: --> [2:OK]
Sep 03 00:32:20.87: [ 4419]: <-- [10:AT+FCT=30\r]
Sep 03 00:32:20.98: [ 4419]: --> [2:OK]
Sep 03 00:32:20.98: [ 4419]: <-- [15:AT+FNR=1,1,1,1\r]
Sep 03 00:32:21.09: [ 4419]: --> [2:OK]
Sep 03 00:32:21.09: [ 4419]: <-- [9:AT+FIE=0\r]
Sep 03 00:32:21.20: [ 4419]: --> [2:OK]
Sep 03 00:32:21.20: [ 4419]: <-- [23:AT+FCC=1,5,2,2,0,0,0,0\r]
Sep 03 00:32:21.32: [ 4419]: --> [2:OK]
Sep 03 00:32:21.32: [ 4419]: <-- [24:AT+FLI="Praxis-Storath"\r]
Sep 03 00:32:21.44: [ 4419]: --> [2:OK]
Sep 03 00:32:21.44: [ 4419]: DIAL 16
Sep 03 00:32:21.44: [ 4419]: <-- [8:ATDT16@\r]
Sep 03 00:32:51.59: [ 4419]: --> [4:+FCO]
Sep 03 00:32:53.51: [ 4419]: --> [27:+FCI:"49 115 UNTEN "]
Sep 03 00:32:53.51: [ 4419]: REMOTE CSI "49 115 UNTEN"
Sep 03 00:32:53.51: [ 4419]: --> [20:+FIS:1,5,0,2,0,0,0,0]
Sep 03 00:32:53.51: [ 4419]: --> [2:OK]
Sep 03 00:32:53.51: [ 4419]: REMOTE best rate 14400 bit/s
Sep 03 00:32:53.51: [ 4419]: REMOTE max page width 1728 pixels in 215 mm
Sep 03 00:32:53.51: [ 4419]: REMOTE max unlimited page length
Sep 03 00:32:53.51: [ 4419]: REMOTE best vres 7.7 line/mm
Sep 03 00:32:53.51: [ 4419]: REMOTE best format 1-D MR
Sep 03 00:32:53.51: [ 4419]: REMOTE best 0 ms/scanline
Sep 03 00:32:53.51: [ 4419]: USE 14400 bit/s
Sep 03 00:32:53.51: [ 4419]: USE 0 ms/scanline
Sep 03 00:32:53.51: [ 4419]: SEND file "docq/doc791.cover;00"
Sep 03 00:32:53.51: [ 4419]: USE page width 1728 pixels in 215 mm
Sep 03 00:32:53.51: [ 4419]: USE unlimited page length
Sep 03 00:32:53.51: [ 4419]: USE 3.85 line/mm
Sep 03 00:32:53.51: [ 4419]: USE 1-D MR
Sep 03 00:32:53.51: [ 4419]: <-- [23:AT+FIS=0,5,0,2,0,0,0,0\r]
Sep 03 00:32:53.63: [ 4419]: --> [2:OK]
Sep 03 00:32:53.63: [ 4419]: <-- [7:AT+FDT\r]
Sep 03 00:33:30.99: [ 4419]: --> [7:+FHS:20]
Sep 03 00:33:30.99: [ 4419]: REMOTE HANGUP: Unspecified Transmit Phase
Berror (code 20) <<-- hyla thinks
Sep 03 00:33:32.19: [ 4419]: -->
[2:OK] <remote hung up
Sep 03 00:36:32.19: [ 4419]: MODEM TIMEOUT: reading line from
modem <whois right
Sep 03 00:36:32.19: [ 4419]: MODEM <Timeout>
Sep 03 00:36:32.19: [ 4419]: <-- [5:ATH0\r]
Sep 03 00:36:32.30: [ 4419]: --> [2:OK]
Sep 03 00:36:32.30: [ 4419]: MODEM set DTR OFF
Sep 03 00:36:32.30: [ 4419]: SESSION END
any ideas to go on
Hopefully Julius
--
Praxis Storath: Powered by linuX (Ver: SuSE 5.3) ; linuX-DAVID
- have another nice night with that great OS linuX (TM) made by
Internet
- blue - screens for linuX background only - REG. USER 72969