ezmlm warning
mgetty-help@crynwr.com (mgetty-help@crynwr.com)
23 Sep 1999 1902:38:51 -0000
Hi! This is the ezmlm program. I'm managing the
mgetty@muc.de mailing list.
Messages to you seem to have been bouncing. I've attached a copy of
the first bounce message I received.
If this message bounces too, I will send you a probe. If the probe bounces,
I will remove your address from the mailing list, without further notice.
I've kept a list of which messages bounced from your address. Copies of
these messages may be in the archive. To get message 12345 from the
archive, send an empty note to mgetty-get.12345@crynwr.com.
Here are the message numbers:
7036
7037
7038
7039
7040
6959
6961
6960
6962
6965
6963
6966
6964
7041
6967
7042
6969
6968
6970
7043
7044
7045
7046
6971
6976
6972
6973
6974
6978
6975
7047
6979
7048
7049
7050
7051
7052
6977
7053
7054
7055
7056
7057
7058
7059
6981
7060
7061
7062
7063
6980
7064
7065
7066
6984
6982
6983
6985
7067
6987
7068
7069
7070
6990
7071
6986
6989
6988
7072
6991
7073
6993
6992
7074
7075
7076
6994
7077
7078
6995
7079
7080
7081
7082
7083
7084
7085
7001
7000
6997
7086
6998
6996
6999
7087
7088
7089
7007
7090
7091
7005
7092
7093
7094
7002
7004
7003
7006
7010
7095
7008
7011
7009
7096
7017
7097
7012
7013
7014
7016
7015
7018
7019
7098
7099
7100
7101
7102
7020
7021
7022
7023
7103
7104
7024
7025
7026
7105
7029
7027
7028
7031
7030
7032
7033
7034
7035
7106
--- Below this line is a copy of the bounce message I received.
Return-Path: <>
Received: (qmail 22681 invoked by uid 0); 11 Sep 1999 10:55:16 -0000
Received: from eli.elilabs.com (root@204.248.49.62)
by pdam.crynwr.com with SMTP; 11 Sep 1999 10:55:16 -0000
Received: from localhost (localhost)
by eli.elilabs.com (8.9.3/8.9.3) with internal id FAA27097;
Sat, 11 Sep 1999 05:53:57 -0500
Date: Sat, 11 Sep 1999 05:53:57 -0500
From: Mail Delivery Subsystem <MAILER-DAEMON@eli.elilabs.com>
Message-Id: <199909111053.FAA27097@eli.elilabs.com>
To: <mgetty-return-7036-mgarc=eli.elilabs.com@crynwr.com>
MIME-Version: 1.0
Content-Type: multipart/report; report-type=delivery-status;
boundary="FAA27097.937047237/eli.elilabs.com"
Subject: Returned mail: Service unavailable
Auto-Submitted: auto-generated (failure)
This is a MIME-encapsulated message
--FAA27097.937047237/eli.elilabs.com
The original message was received at Sat, 11 Sep 1999 05:53:52 -0500
from ns.crynwr.com [192.203.178.14]
----- The following addresses had permanent fatal errors -----
"|/home/mgarc/emailcat.pl >> /home/mgarc/09-99/mailbox.in"
(expanded from: <mgarc@eli.elilabs.com>)
----- Transcript of session follows -----
sh: cannot use > in command
554 "|/home/mgarc/emailcat.pl >> /home/mgarc/09-99/mailbox.in"... Service unavailable
--FAA27097.937047237/eli.elilabs.com
Content-Type: message/delivery-status
Reporting-MTA: dns; eli.elilabs.com
Received-From-MTA: DNS; ns.crynwr.com
Arrival-Date: Sat, 11 Sep 1999 05:53:52 -0500
Final-Recipient: RFC822; <mgarc@eli.elilabs.com>
X-Actual-Recipient: RFC822; |/home/mgarc/emailcat.pl >> /home/mgarc/09-99/mailbox.in@eli.elilabs.com
Action: failed
Status: 5.5.0
Last-Attempt-Date: Sat, 11 Sep 1999 05:53:57 -0500
--FAA27097.937047237/eli.elilabs.com
Content-Type: message/rfc822
Return-Path: <mgetty-return-7036-mgarc=eli.elilabs.com@crynwr.com>
Received: from ns.crynwr.com (ns.crynwr.com [192.203.178.14])
by eli.elilabs.com (8.9.3/8.9.3) with SMTP id FAA27096
for <mgarc@eli.elilabs.com>; Sat, 11 Sep 1999 05:53:52 -0500
Received: (qmail 22514 invoked by alias); 11 Sep 1999 10:54:50 -0000
Mailing-List: contact mgetty-help@crynwr.com; run by ezmlm
Delivered-To: mailing list mgetty@crynwr.com
Received: (qmail 22493 invoked by uid 0); 11 Sep 1999 10:54:49 -0000
Received: from slarti.muc.de (193.149.48.10)
by pdam.crynwr.com with SMTP; 11 Sep 1999 10:54:49 -0000
Received: (qmail 19270 invoked by uid 1013); 11 Sep 1999 10:56:14 -0000
Delivered-To: mgetty@muc.de
Received: (qmail 19264 invoked from network); 11 Sep 1999 10:56:13 -0000
Received: from mailout03.btx.dtag.de (194.25.2.151)
by slarti.muc.de with SMTP; 11 Sep 1999 10:56:13 -0000
Received: from fwd02.btx.dtag.de ([194.25.2.162])
by mailout03.btx.dtag.de with smtp
id 11PknP-0006UZ-00; Sat, 11 Sep 1999 12:54:15 +0200
Received: from t-online.de (0371772655-0001(btxid)@[193.159.93.20])
by fwd02.btx.dtag.de with smtp
id <m11PknK-000505C>; Sat, 11 Sep 1999 12:54:10 +0200
Message-ID: <37DA34DF.99792E07@t-online.de>
Date: Sat, 11 Sep 1999 12:54:23 +0200
Organization: BTPK
X-Mailer: Mozilla 4.51 [en] (X11; I; Linux 2.2.7 i586)
X-Accept-Language: en
MIME-Version: 1.0
To: mgetty@muc.de
Subject: Re: output for mgetty
References: <000401befa57$0a8c2cd0$3b0199a8@aks2.atlasmail.com> <37D8B876.3F7125AA@t-online.de> <19990910234545.C29094@greenie.muc.de>
Content-Type: text/plain; charset=iso-8859-1
Content-Transfer-Encoding: quoted-printable
X-Sender: 0371772655-0001@t-dialin.net
From: joerg-haas@t-online.de (=?iso-8859-1?Q?J=F6rg?= Haas)
Sehr geehrter Herr Doering,
danke f=FCr Ihre Post. Vielleicht k=F6nnen Sie nachfolgendes, falls von
allgemeinem =
Interesse, an de.alt.comm.mgetty forwarden? Der
MAILER-DAEMON@t-online.de
l=E4=DFt mich nicht bis zur Newsgroup durch. Den Inhalt von
habe ich eingearbeitet.
-------------------------------------------------------------------------=
----------
Gert Doering wrote:
> =
> Hi,
> =
> include log files (cut and paste). Otherwise we are not able to help -=
> we don't do mind-reading this week.
OK, I am also unable of far-perceiptions. :)
> =
> gert
> =
> On Fri, Sep 10, 1999 at 09:51:19AM +0200, J=F6rg Haas wrote:
> > Hi
> >
> >
> > First
> > I,am usin SuSE Linux6.1 and SO50 and I want the package to fax. So I
> > print "generic postscript" to a file and convert it with "gs gs -sDE=
VICE=3D3Ddfaxhigh
> > -sOutputFile=3D3D/tmp/fax.g3.%d /tmp/so-output. I beame a error messa=
ge from
> > gs and it stops in interpreter modus. If I use a .ps file from the li=
nux
> > distribution (golfer.ps) everything works fine and I can "sendfax num=
ber g3-file" . Any ideas or
> > does anybody know a better way to fax from a none ps application?
> >
The content of /var/log/sendfax.log:
09/08 11:46:24 sendfax: experimental test release 1.1.19-Nov24
09/08 11:46:24 sendfax.c compiled at May 1 1999, 08:09:12
09/08 11:46:24 sending fax to 0772331
09/08 11:46:24 checking
/usr/doc/packages/ghostscript/examples/golfer.ps
09/08 11:46:24 makelock(ttyS1) called
09/08 11:46:24 do_makelock: lock=3D'/var/lock/LCK..ttyS1'
09/08 11:46:24 lock made
09/08 11:46:24 tss: set speed to 38400 (017)
09/08 11:46:24 tio_set_flow_control( HARD )
09/08 11:46:24 yS1 fax_open_device succeeded, ttyS1 -> 4
09/08 11:46:24 yS1 reading specific data for port 'ttyS1'
09/08 11:46:24 yS1 reading /etc/mgetty+sendfax/sendfax.config...
09/08 11:46:24 yS1 conf lib: read: 'verbose y'
09/08 11:46:24 yS1 conf lib: read: 'debug 5'
09/08 11:46:24 yS1 conf lib: read: 'fax-devices ttyS1:ttyS2'
09/08 11:46:24 yS1 conf lib: read: 'fax-id 49 115 xxxxxxxx'
09/08 11:46:24 yS1 conf lib: read: 'max-tries 3'
09/08 11:46:24 yS1 conf lib: read: 'max-tries-continue y'
09/08 11:46:24 yS1 key: 'fax-devices', type=3D1, flags=3D4, data=3D(ign=
ored)
09/08 11:46:24 yS1 key: 'modem-init', type=3D1, flags=3D0, data=3D(empt=
y)
09/08 11:46:24 yS1 key: 'modem-handshake', type=3D1, flags=3D0,
data=3D(empty)
09/08 11:46:24 yS1 key: 'modem-type', type=3D1, flags=3D1, data=3Dauto
09/08 11:46:24 yS1 key: 'modem-quirks', type=3D0, flags=3D0, data=3D(em=
pty)
09/08 11:46:24 yS1 key: 'max-tries', type=3D0, flags=3D3, data=3D3
09/08 11:46:24 yS1 key: 'max-tries-continue', type=3D3, flags=3D3,
data=3DTRUE
09/08 11:46:24 yS1 key: 'speed', type=3D0, flags=3D1, data=3D38400
09/08 11:46:24 yS1 key: 'switchbd', type=3D0, flags=3D1, data=3D0
09/08 11:46:24 yS1 key: 'open-delay', type=3D0, flags=3D0, data=3D(empt=
y)
09/08 11:46:24 yS1 key: 'ignore-carrier', type=3D3, flags=3D1, data=3DT=
RUE
09/08 11:46:24 yS1 key: 'dial-prefix', type=3D1, flags=3D1, data=3DATD
09/08 11:46:24 yS1 key: 'fax-id', type=3D1, flags=3D3, data=3D49 115
xxxxxxxx
09/08 11:46:24 yS1 key: 'poll-dir', type=3D1, flags=3D1, data=3D.
09/08 11:46:24 yS1 key: 'normal-res', type=3D3, flags=3D1, data=3DFALSE=
09/08 11:46:24 yS1 key: 'fax-min-speed', type=3D0, flags=3D1, data=3D0
09/08 11:46:24 yS1 key: 'fax-max-speed', type=3D0, flags=3D1, data=3D14=
400
09/08 11:46:24 yS1 key: 'debug', type=3D0, flags=3D3, data=3D5
09/08 11:46:24 yS1 key: 'verbose', type=3D3, flags=3D3, data=3DTRUE
09/08 11:46:24 yS1 key: '', type=3D3, flags=3D1, data=3DFALSE
09/08 11:46:24 yS1 key: 'page-header', type=3D1, flags=3D0, data=3D(emp=
ty)
09/08 11:46:24 yS1 key: '', type=3D3, flags=3D1, data=3DFALSE
09/08 11:46:24 yS1 key: '', type=3D3, flags=3D1, data=3DFALSE
09/08 11:46:24 yS1 key: '', type=3D1, flags=3D1, data=3D
09/08 11:46:24 yS1 tss: set speed to 38400 (017)
09/08 11:46:24 yS1 mdm_send: 'ATV1Q0'
09/08 11:46:24 yS1 mdm_command: string 'ATV1Q0'
09/08 11:46:25 yS1 mdm_command: string 'OK' -> OK
09/08 11:46:25 yS1 mdm_send: 'ATI'
09/08 11:46:25 yS1 mdm_gis: string 1: '28800'
09/08 11:46:25 yS1 mdm_identify: string '28800'
09/08 11:46:25 yS1 Generic Rockwell modem (28800)
09/08 11:46:25 yS1 mdm_send: 'ATI3'
09/08 11:46:25 yS1 mdm_gis: string 1: 'CRS-02 GER 950419'
09/08 11:46:25 yS1 mdm_send: 'ATI4'
09/08 11:46:25 yS1 mdm_gis: string 1: 'ROCKWELL VERSION=3DV1.100A =
MODEL=3DV34_DS'
09/08 11:46:25 yS1 additional info: 'ROCKWELL VERSION=3DV1.100A =
MODEL=3DV34_DS'
09/08 11:46:25 yS1 modem quirks: 0004
09/08 11:46:25 yS1 mdm_send: 'AT+FCLASS=3D2'
09/08 11:46:25 yS1 mdm_command: string 'AT+FCLASS=3D2'
09/08 11:46:25 yS1 mdm_command: string 'OK' -> OK
09/08 11:46:25 yS1 mdm_send: 'AT+FLID=3D"49 115 xxxxxxxx"'
09/08 11:46:26 yS1 mdm_command: string 'AT+FLID=3D"49 115 xxxxxxxx"'
09/08 11:46:26 yS1 mdm_command: string 'OK' -> OK
09/08 11:46:26 yS1 mdm_send: 'AT+FDCC=3D1,5,0,2,0,0,0,0'
09/08 11:46:26 yS1 mdm_command: string 'AT+FDCC=3D1,5,0,2,0,0,0,0'
09/08 11:46:26 yS1 mdm_command: string 'OK' -> OK
09/08 11:46:26 yS1 mdm_send: 'AT+FBOR=3D0'
09/08 11:46:26 yS1 mdm_command: string 'AT+FBOR=3D0'
09/08 11:46:26 yS1 mdm_command: string 'OK' -> OK
09/08 11:46:26 yS1 fax_send: 'ATD0772331'
09/08 11:46:26 yS1 fax_wait_for(OK)
09/08 11:46:26 yS1 fax_wait_for: string 'ATD0772331'
09/08 11:46:37 yS1 fax_wait_for: string '+FCON'
09/08 11:46:39 yS1 fax_wait_for: string '+FCSI: " +49 371
772331"'
09/08 11:46:39 yS1 fax_id: '+FCSI: " +49 371 772331"'
09/08 11:46:39 yS1 fax_wait_for: string '+FDIS: 1,3,0,2,1,0,0,4'
09/08 11:46:39 yS1 fax_wait_for: string 'OK'** found **
09/08 11:46:39 yS1 sendfax: IGNORE DCD (carrier) status
09/08 11:46:39 yS1 =
fax_send_page("/usr/doc/packages/ghostscript/examples/golfer.ps")
started...
09/08 11:46:39 yS1 tio_set_flow_control( HARD )
09/08 11:46:39 yS1 fax_send: 'AT+FDT'
09/08 11:46:39 yS1 fax_wait_for(CONNECT)
09/08 11:46:39 yS1 fax_wait_for: string 'AT+FDT'
09/08 11:46:46 yS1 fax_wait_for: string '+FDCS: 1,3,0,2,0,0,0,3'
09/08 11:46:46 yS1 transmission par.: '+FDCS: 1,3,0,2,0,0,0,3'
09/08 11:46:47 yS1 fax_wait_for: string 'CONNECT'** found **
09/08 11:46:47 yS1 waiting for XON, got:[0a][11]
09/08 11:46:47 yS1 tio_set_flow_control( HARD XON_OUT )
09/08 11:46:47 yS1 sending
/usr/doc/packages/ghostscript/examples/golfer.ps...
09/08 11:46:47 yS1 file looks 'suspicious', buf=3D25 21 50 53...
09/08 11:47:04 yS1 page complete, 25499 bytes sent
09/08 11:47:04 yS1 sending DLE ETX...
09/08 11:47:04 yS1 fax_wait_for(OK)
09/08 11:47:08 yS1 fax_wait_for: string 'OK'** found **
09/08 11:47:08 yS1 fax_send: 'AT+FET=3D2'
09/08 11:47:08 yS1 fax_wait_for(OK)
09/08 11:47:08 yS1 fax_wait_for: string 'AT+FET=3D2'
09/08 11:47:22 yS1 fax_wait_for: string '+FHNG: 54'
09/08 11:47:22 yS1 connection hangup: '+FHNG: 54'
09/08 11:47:22 yS1 (No response to EOP repeated 3 times)
09/08 11:47:23 yS1 fax_wait_for: string 'OK'** found **
09/08 11:47:23 ##### failed transmitting
/usr/doc/packages/ghostscript/examples/golfer.ps: phone=3D"0772331",
+FHS:54, dev=3DttyS1, time=3D57s, acct=3D""
09/08 11:47:23 yS1 fax_send: 'AT+FCLASS=3D0'
09/08 11:47:23 yS1 removing lock file
--
The messages of "gs -sDEVICE=3Ddfaxhigh -sOutputFile=3D/tmp/fax.g3.%d
/tmp/so50 ":
GNU Ghostscript 5.10 (1998-12-17)
Copyright (C) 1997 Aladdin Enterprises, Menlo Park, CA. All rights
reserved.
This software comes with NO WARRANTY: see the file COPYING for details.
Loading NimbusSanL-Bold font from
/usr/share/ghostscript/fonts/n019004l.pfb... 2159836 788934 1320184
30855 1 done.
Loading NimbusRomNo9L-ReguItal font from
/usr/share/ghostscript/fonts/n021023l.pfb... 2200020 831311 1320184
33901 1 done.
Loading NimbusRomNo9L-Regu font from
/usr/share/ghostscript/fonts/n021003l.pfb... 2240204 871848 1320184
36828 1 done.
Loading NimbusRomNo9L-MediItal font from
/usr/share/ghostscript/fonts/n021024l.pfb... 2300480 916898 1380460
85481 1 done.
Loading NimbusRomNo9L-Medi font from
/usr/share/ghostscript/fonts/n021004l.pfb... 2340664 957239 1380460
91195 1 done.
>>showpage, press <return> to continue<<
GS>
-------------------------------------------------------------------------=
---------------------------------------------
> > Second
> > I want to get megetty with
> > "S1:23:respawn:/usr/sbin/mgetty -s 38400 ttyS1" in /etc/inittab to
> > receive a fax. But ont the fax station appears the message " Device b=
usy".
> >
Here the content of /var/log/mgetty.ttyS1:
09/09 06:58:59 yS1 mgetty: experimental test release 1.1.19-Nov24
09/09 06:58:59 yS1 check for lockfiles
09/09 06:58:59 yS1 locking the line
09/09 06:58:59 yS1 lowering DTR to reset Modem
09/09 06:59:00 yS1 send: \dATQ0V1H0[0d]
09/09 06:59:01 yS1 waiting for ``OK'' ** found **
09/09 06:59:01 yS1 send: ATS0=3D0Q0&D3&C1[0d]
09/09 06:59:01 yS1 waiting for ``OK'' ** found **
09/09 06:59:01 yS1 mdm_send: 'ATI'
09/09 06:59:01 yS1 Generic Rockwell modem (28800)
09/09 06:59:01 yS1 mdm_send: 'ATI3'
09/09 06:59:01 yS1 mdm_send: 'ATI4'
09/09 06:59:02 yS1 additional info: 'ROCKWELL VERSION=3DV1.100A =
MODEL=3DV34_DS'
09/09 06:59:02 yS1 modem quirks: 0004
09/09 06:59:02 yS1 mdm_send: 'AT+FCLASS=3D2' -> OK
09/09 06:59:02 yS1 mdm_send: 'AT+FCLASS=3D0' -> OK
09/09 06:59:02 yS1 mdm_send: 'AT+FAA=3D1;+FCR=3D1' -> OK
09/09 06:59:02 yS1 mdm_send: 'AT+FBOR=3D0' -> OK
09/09 06:59:02 yS1 mdm_send: 'AT+FLID=3D"49 371 7710383"' -> OK
09/09 06:59:03 yS1 mdm_send: 'AT+FDCC=3D1,5,0,2,0,0,0,0' -> OK
09/09 06:59:03 yS1 waiting...
09/09 06:59:18 yS1 lock not made: lock file exists (pid=3D311)
--
09/09 13:02:20 yS1 checking if modem is still alive
09/09 13:02:21 yS1 mdm_send: 'AT' -> OK
09/09 13:02:21 yS1 waiting...
09/09 13:30:41 ##### failed dev=3DttyS1, pid=3D335, got signal 15, exitin=
g
> >
> > Please a CC to joerg-haas@t-online.de.
> >
> > regards
> > J=3DF6rg
> =
> --
> USENET is *not* the non-clickable part of WWW!
> //www.muc.de=
/~gert/
> Gert Doering - Munich, Germany gert@greenie=
=2Emuc.de
> fax: +49-89-35655025 gert.doering@physik.tu-muen=
chen.de
-- =
****************************************************************
J=F6rg Haas Tel.: 0371/772655
Zum Adelsberg 13 Fax : 0371/7710383 =
D-09128 Chemnitz joerg-haas@t-online
****************************************************************
--FAA27097.937047237/eli.elilabs.com--