DCS not recognized
Michael Reinelt (reinelt@eunet.at)
Mon, 09 Nov 1998 03:22:42 +0100
Hi there,
I get the following problems, but only with few fax machines:
11/08 10:32:42 sendfax: experimental test release 1.1.13-Mar28
11/08 10:32:42 sending fax to **********
11/08 10:32:42 checking f1
11/08 10:32:42 checking f2
11/08 10:32:42 modem tss: set speed to 38400 (017)
11/08 10:32:43 modem mdm_send: 'ATV1Q0'
11/08 10:32:43 modem mdm_command: string 'ATV1Q0'
11/08 10:32:43 modem mdm_command: string 'OK' -> OK
11/08 10:32:43 modem mdm_send: 'ATI'
11/08 10:32:43 modem mdm_gis: string 1: '3361'
11/08 10:32:43 modem mdm_identify: string '3361'
11/08 10:32:43 modem USR Courier/Sportster V.34(+) detected
11/08 10:32:43 modem mdm_send: 'ATI3'
11/08 10:32:43 modem mdm_gis: string 1: 'USRobotics Sportster Voice
33600 Fax Rev. 2.0'
11/08 10:32:43 modem additional info: 'USRobotics Sportster Voice 33600
Fax Rev. 2.0'
11/08 10:32:43 modem mdm_send: 'AT+FCLASS=2.0'
11/08 10:32:43 modem mdm_command: string 'AT+FCLASS=2.0'
11/08 10:32:43 modem mdm_command: string 'OK' -> OK
11/08 10:32:43 modem mdm_send: 'AT+FLI="+43-316-692343"'
11/08 10:32:43 modem mdm_command: string 'AT+FLI="+43-316-692343"'
11/08 10:32:44 modem mdm_command: string 'OK' -> OK
11/08 10:32:44 modem mdm_send: 'AT+FCC=1,5,0,2,0,0,0,0'
11/08 10:32:44 modem mdm_command: string 'AT+FCC=1,5,0,2,0,0,0,0'
11/08 10:32:44 modem mdm_command: string 'OK' -> OK
11/08 10:32:44 modem mdm_send: 'AT+FBO=0'
11/08 10:32:44 modem mdm_command: string 'AT+FBO=0'
11/08 10:32:44 modem mdm_command: string 'OK' -> OK
11/08 10:32:44 modem mdm_send: 'AT+FNR=1,1,1,0'
11/08 10:32:44 modem mdm_command: string 'AT+FNR=1,1,1,0'
11/08 10:32:44 modem mdm_command: string 'OK' -> OK
11/08 10:32:44 modem mdm_send: 'AT+FLO=2'
11/08 10:32:44 modem mdm_command: string 'AT+FLO=2'
11/08 10:32:44 modem mdm_command: string 'OK' -> OK
11/08 10:32:44 modem fax_send: 'ATDT**********'
11/08 10:32:44 modem fax_wait_for(OK)
11/08 10:32:44 modem fax_wait_for: string 'ATDT**********'
11/08 10:33:44 modem fax_wait_for: string '+FCO'
11/08 10:33:46 modem fax_wait_for: string '+FCI:"
"'
11/08 10:33:46 modem fax_id: '+FCI:" "'
11/08 10:33:46 modem fax_wait_for: string '+FIS:1,3,0,2,1,0,0,4'
11/08 10:33:46 modem fax_wait_for: string 'OK'** found **
11/08 10:33:46 modem sendfax: IGNORE DCD (carrier) status
11/08 10:33:46 modem fax_send_page("f1") started...
11/08 10:33:46 modem tio_set_flow_control( HARD )
11/08 10:33:47 modem fax_send: 'AT+FDT'
11/08 10:33:47 modem fax_wait_for(CONNECT)
11/08 10:33:47 modem fax_wait_for: string 'AT+FDT'
11/08 10:33:47 modem fax_wait_for: string '+FCS:1,3,0,2,0,0,0,0'
11/08 10:33:47 modem transmission par.: '+FCS:1,3,0,2,0,0,0,0'
11/08 10:33:53 modem fax_wait_for: string '+FCI:"
"'
11/08 10:33:53 modem fax_id: '+FCI:" "'
11/08 10:33:53 modem fax_wait_for: string '+FIS:1,3,0,2,1,0,0,4'
11/08 10:33:53 modem fax_wait_for: string '+FCS:1,3,0,2,0,0,0,0'
11/08 10:33:53 modem transmission par.: '+FCS:1,3,0,2,0,0,0,0'
11/08 10:34:00 modem fax_wait_for: string '+FCI:"
"'
11/08 10:34:00 modem fax_id: '+FCI:" "'
11/08 10:34:00 modem fax_wait_for: string '+FIS:1,3,0,2,1,0,0,4'
11/08 10:34:00 modem fax_wait_for: string '+FCS:1,3,0,2,0,0,0,0'
11/08 10:34:00 modem transmission par.: '+FCS:1,3,0,2,0,0,0,0'
11/08 10:34:06 modem fax_wait_for: string '+FCI:"
"'
11/08 10:34:06 modem fax_id: '+FCI:" "'
11/08 10:34:06 modem fax_wait_for: string '+FIS:1,3,0,2,1,0,0,4'
11/08 10:34:07 modem fax_wait_for: string '+FHS:26'
11/08 10:34:07 modem connection hangup: '+FHS:26'
11/08 10:34:07 modem (DIS/DTC received 3 times; DCS not recognized)**
found **
11/08 10:34:07 modem AT+FDT -> some error (26), abort fax send!
11/08 10:34:07 ##### failed transmitting f1: phone="**********",
+FHS:26, dev=modem, time=83s, acct=""
What does this error mean? What can I do to avoid it?
thanks in advance,
Michael
P.S. Please cc direct to me, I´m not on the list
--
netWorks Vox: +43 316 698260
Michael Reinelt Fax: +43 316 692343
Geisslergasse 4 GSM: +43 676 3079941
A-8045 Graz, Austria e-mail: reinelt@eunet.at