Problems with vgetty

Guillermo Moreno (phantom@jazzfree.com)
Thu, 28 Oct 1999 18:43:42 +0200
Messages sorted by:[ date ][ thread ][ subject ][ author ]
Hi,

My modem it is a trust communicator 33k6, I have configured successfully
mgetty
but i  couldn't make work vgetty. I have try several configurations, but
still doesn't work
Here is the log  (level 4), if it's necesary a higher level, please make
me know.


10/28 18:19:27 yS1  vgetty: experimental test release 0.9.4 / 20Jul99
10/28 18:19:27 yS1  mgetty: experimental test release 1.1.21-Jul24
10/28 18:19:27 yS1  reading generic configuration from config file
/etc/mgetty+sen
dfax/voice.conf
10/28 18:19:27 yS1  reading program vgetty configuration from config
file /etc/mge
tty+sendfax/voice.conf
10/28 18:19:27 yS1  reading port ttyS1 configuration from config file
/etc/mgetty+
sendfax/voice.conf
10/28 18:19:27 yS1  check for lockfiles
10/28 18:19:27 yS1  locking the line
10/28 18:19:28 yS1  WARNING: DSR is off - modem turned off or bad cable?

10/28 18:19:28 yS1  lowering DTR to reset Modem
10/28 18:19:29 yS1  send: \dATQ0V1H0[0d]
10/28 18:19:29 yS1  waiting for ``OK''
10/28 18:19:49 yS1  timeout in chat script, waiting for `OK'    <---
This doesn't happend with mgetty
10/28 18:19:49 yS1  init chat timed out, trying force-init-chat
10/28 18:19:49 yS1  send: \d[10][03]\d\d\d+++\d\d\d[0d]\dATQ0V1H0[0d]
10/28 18:19:53 yS1  waiting for ``OK'' ** found **
10/28 18:19:54 yS1  send: \dATQ0V1H0[0d]
10/28 18:19:55 yS1  waiting for ``OK'' ** found **
10/28 18:19:56 yS1  send: ATS0=0Q0&D3&C1[0d]
10/28 18:19:56 yS1  waiting for ``OK'' ** found **
10/28 18:19:56 yS1  mdm_send: 'AT+FCLASS=2' -> OK
10/28 18:19:56 yS1  mdm_send: 'AT+FCLASS=0' -> OK
10/28 18:19:56 yS1  mdm_send: 'AT+FAA=1;+FCR=1' -> OK
10/28 18:19:57 yS1  mdm_send: 'AT+FBOR=0' -> OK
10/28 18:19:57 yS1  mdm_send: 'AT+FLID="+34 915610995"' -> OK
10/28 18:19:57 yS1  mdm_send: 'AT+FDCC=1,5,0,2,0,0,0,0' -> OK
10/28 18:19:57 yS1  detecting voice modem type
10/28 18:19:58 yS1  Rockwell detected
10/28 18:20:20 yS1  vgetty: timeout while reading character from voice
modem
10/28 18:20:20 yS1  initializing ROCKWELL voice modem
10/28 18:20:20 yS1  vgetty: Modem returned ERROR
10/28 18:20:20 yS1  can't set silence period
10/28 18:20:20 yS1  vgetty: Modem returned ERROR
10/28 18:20:20 yS1  can't disable silence deletion
10/28 18:20:21 yS1  vgetty: Modem returned ERROR
10/28 18:20:21 yS1  can't set DLE responses
10/28 18:20:21 yS1  vgetty: Modem returned ERROR
10/28 18:20:21 yS1  can't set silence threshold
10/28 18:20:21 yS1  vgetty: Modem returned ERROR
10/28 18:20:22 yS1  waiting...

And here a piece of the log level 6 (when the errors start):


10/28 18:26:37 yS1    Rockwell: OK
10/28 18:26:37 yS1  Rockwell detected
10/28 18:26:37 yS1   vgetty: entering voice mode
10/28 18:26:37 yS1   vgetty: Installing signal handlers
10/28 18:26:37 yS1   voice command: 'AT#CLS?' -> ''
10/28 18:26:37 yS1    vgetty: AT#CLS?
10/28 18:26:37 yS1    Rockwell: ERROR
10/28 18:26:37 yS1   voice command: '' -> 'OK'
10/28 18:26:37 yS1    Rockwell:
10/28 18:26:58 yS1  vgetty: timeout while reading character from voice
modem
10/28 18:26:58 yS1    vgetty: queued event RESET_WATCHDOG at position
0000
10/28 18:26:58 yS1  initializing ROCKWELL voice modem
10/28 18:26:58 yS1   voice command: 'AT#VSP=70' -> 'OK'
10/28 18:26:58 yS1    vgetty: AT#VSP=70
10/28 18:26:58 yS1    vgetty: unqueued event RESET_WATCHDOG at position
0000
10/28 18:26:58 yS1    vgetty: voice_handle_event got event
RESET_WATCHDOG with dat
a <NUL>
10/28 18:26:58 yS1    Rockwell: ERROR
10/28 18:26:58 yS1  vgetty: Modem returned ERROR
10/28 18:26:58 yS1  can't set silence period
10/28 18:26:58 yS1   voice command: 'AT#VSD=0' -> 'OK'
10/28 18:26:58 yS1    vgetty: AT#VSD=0
10/28 18:26:58 yS1    Rockwell:
10/28 18:26:58 yS1    vgetty: Got terminate signal
10/28 18:26:58 yS1    vgetty: queued event SIGNAL_SIGTERM at position
0001ERROR
10/28 18:26:58 yS1  vgetty: Modem returned ERROR
10/28 18:26:58 yS1  can't disable silence deletion
10/28 18:26:58 yS1   voice command: 'AT#VTD=3F,3F,3F' -> 'OK'
10/28 18:26:58 yS1    vgetty: AT#VTD=3F,3F,3F
10/28 18:26:58 yS1    vgetty: unqueued event SIGNAL_SIGTERM at position
0001
10/28 18:26:58 yS1    vgetty: voice_handle_event got event
SIGNAL_SIGTERM with dat
a <NUL>
10/28 18:26:58 yS1    Rockwell: ERROR
10/28 18:26:59 yS1  vgetty: Modem returned ERROR
10/28 18:26:59 yS1  can't set DLE responses
10/28 18:26:59 yS1   voice command: 'AT#VSS=1' -> 'OK'
10/28 18:26:59 yS1    vgetty: AT#VSS=1
10/28 18:26:59 yS1    Rockwell: ERROR
10/28 18:26:59 yS1  vgetty: Modem returned ERROR
10/28 18:26:59 yS1  can't set silence threshold
10/28 18:26:59 yS1   voice command: 'AT&K3' -> 'OK'
10/28 18:26:59 yS1    vgetty: AT&K3
10/28 18:26:59 yS1    Rockwell: OK
10/28 18:26:59 yS1   tio_set_flow_control( HARD )
10/28 18:26:59 yS1   vgetty: leaving voice mode
10/28 18:26:59 yS1   voice command: 'AT#CLS=ERROR' -> 'OK'
10/28 18:26:59 yS1    vgetty: AT#CLS=ERROR
10/28 18:26:59 yS1    Rockwell: ERROR
10/28 18:26:59 yS1  vgetty: Modem returned ERROR
10/28 18:26:59 yS1   vgetty: Restoring signal handlers
10/28 18:26:59 yS1   waiting for line to clear (VTIME), read:
10/28 18:27:00 yS1   removing lock file
10/28 18:27:00 yS1  waiting...

I will thank any help,

                            GM