Problem Elsa Microlink 56k und sendfax

Marcel Odendahl (odendahl@cegis-admin2.cegis.de)
9 Nov 1999 1914:46:49 GMT
Messages sorted by:[ date ][ thread ][ subject ][ author ]
Hallo,

ich habe hier ein Problem mit dem Microlink 56k und
sendfax.
Leider kann ich nur 1 Fax versenden. Danach mu"s ich
das Modem reseten, da sonst keine Verbindung mehr
bekommt.
K"onnte mir jemand mal seine Config schicken.
Ich h"ange noch die Protokolle und meine Config an.
Das Ganze ist noch auf ein 28.8 TQV abgestimmt, also
gibt es im Logfile bei einigen AT-Befehlen einen
Error. Das Problem war beim 28.8 TQV gleich.

MfG,

         Marcel.

------------------------------------------------------
10/27 13:36:34  sendfax: experimental test release 1.1.21-Jul24
10/27 13:36:34   sendfax.c compiled at Oct  7 1999, 10:37:15
10/27 13:36:34  sending fax to 502143
10/27 13:36:34  checking f1.g3
10/27 13:36:34   makelock(ttyS1) called
10/27 13:36:34   do_makelock: lock='/var/lock/LCK..ttyS1'
10/27 13:36:34   lock made
10/27 13:36:34   tss: set speed to 19200 (016)
10/27 13:36:34   tio_set_flow_control( HARD )
10/27 13:36:34 yS1   fax_open_device succeeded, ttyS1 -> 4
10/27 13:36:34 yS1   reading specific data for port 'ttyS1'
10/27 13:36:34 yS1   reading /etc/mgetty+sendfax/sendfax.config...
10/27 13:36:34 yS1   conf lib: read: 'verbose y'
10/27 13:36:34 yS1   conf lib: read: 'debug 9'
10/27 13:36:34 yS1   conf lib: read: 'fax-devices ttyS1:ttyS2'
10/27 13:36:34 yS1   conf lib: read: 'fax-id 49 531 502143'
10/27 13:36:34 yS1   conf lib: read: 'dial-prefix ATDT'
10/27 13:36:34 yS1   conf lib: read: 'max-tries 3'
10/27 13:36:34 yS1   conf lib: read: 'max-tries-continue y'
10/27 13:36:34 yS1   conf lib: read: 'open-delay 500'
10/27 13:36:34 yS1   conf lib: read: 'ignore-carrier yes'
10/27 13:36:34 yS1   key: 'fax-devices', type=1, flags=4, data=(ignored)
10/27 13:36:34 yS1   key: 'modem-init', type=1, flags=0, data=(empty)
10/27 13:36:34 yS1   key: 'modem-handshake', type=1, flags=1, data=AT\Q3&S0
10/27 13:36:34 yS1   key: 'modem-type', type=1, flags=1, data=auto
10/27 13:36:34 yS1   key: 'modem-quirks', type=0, flags=0, data=(empty)
10/27 13:36:34 yS1   key: 'fax-send-flow', type=4, flags=1, data=7
10/27 13:36:34 yS1   key: 'fax-rec-flow', type=4, flags=1, data=7
10/27 13:36:34 yS1   key: 'max-tries', type=0, flags=3, data=3
10/27 13:36:34 yS1   key: 'max-tries-continue', type=3, flags=3, data=TRUE
10/27 13:36:34 yS1   key: 'speed', type=0, flags=1, data=19200
10/27 13:36:34 yS1   key: 'switchbd', type=0, flags=1, data=0
10/27 13:36:34 yS1   key: 'open-delay', type=0, flags=3, data=500
10/27 13:36:34 yS1   key: 'ignore-carrier', type=3, flags=3, data=TRUE
10/27 13:36:34 yS1   key: 'dial-prefix', type=1, flags=3, data=ATDT
10/27 13:36:34 yS1   key: 'fax-id', type=1, flags=3, data=49 531 502143
10/27 13:36:34 yS1   key: 'poll-dir', type=1, flags=1, data=.
10/27 13:36:34 yS1   key: 'normal-res', type=3, flags=1, data=FALSE
10/27 13:36:34 yS1   key: 'fax-min-speed', type=0, flags=1, data=0
10/27 13:36:34 yS1   key: 'fax-max-speed', type=0, flags=1, data=14400
10/27 13:36:34 yS1   key: 'debug', type=0, flags=3, data=9
10/27 13:36:34 yS1   key: 'verbose', type=3, flags=2, data=TRUE
10/27 13:36:34 yS1   key: '', type=3, flags=1, data=FALSE
10/27 13:36:34 yS1   key: 'page-header', type=1, flags=0, data=(empty)
10/27 13:36:34 yS1   key: '', type=3, flags=1, data=FALSE
10/27 13:36:34 yS1   key: '', type=3, flags=1, data=FALSE
10/27 13:36:34 yS1   key: '', type=1, flags=1, data=
10/27 13:36:34 yS1   tss: set speed to 19200 (016)
10/27 13:36:34 yS1   pausing 500 ms
10/27 13:36:35 yS1  mdm_send: 'ATV1Q0'
10/27 13:36:35 yS1    got:
10/27 13:36:45 yS1  Warning: got alarm signal!
10/27 13:36:45 yS1  mdm_read_byte: read returned -1: Interrupted system call
10/27 13:36:45 yS1  mdm_get_line: cannot read byte, return: Interrupted system c
all -> ERROR
10/27 13:36:45 yS1  mdm_send: 'ATV1Q0'
10/27 13:36:45 yS1    got:ATV1Q0[0d]
10/27 13:36:45 yS1   mdm_command: string 'ATV1Q0'
10/27 13:36:45 yS1    got:[0d][0a]OK[0d]
10/27 13:36:45 yS1   mdm_command: string 'OK' -> OK
10/27 13:36:45 yS1  retry succeded, dev=ttyS1
10/27 13:36:45 yS1  mdm_send: 'ATI'
10/27 13:36:45 yS1    got:[0a]ATI[0d]
10/27 13:36:45 yS1    got:[0d][0a]282[0d]
10/27 13:36:45 yS1   mdm_gis: string 1: '282'
10/27 13:36:45 yS1    got:[0a][0d][0a]OK[0d]
10/27 13:36:45 yS1   mdm_identify: string '282'
10/27 13:36:45 yS1  ELSA MicroLink 28.8/56K series detected
10/27 13:36:45 yS1  mdm_send: 'ATI3'
10/27 13:36:45 yS1    got:[0a]ATI3[0d]
10/27 13:36:45 yS1    got:[0d][0a]Version 1.10 / 19.07.1999[0d]
10/27 13:36:45 yS1   mdm_gis: string 1: 'Version 1.10 / 19.07.1999'
10/27 13:36:45 yS1    got:[0a][0d][0a]OK[0d]
10/27 13:36:45 yS1  additional info: 'Version 1.10 / 19.07.1999'
10/27 13:36:45 yS1  mdm_send: 'AT+FCLASS=2.0'
10/27 13:36:45 yS1    got:[0a]AT+FCLASS=2.0[0d]
10/27 13:36:45 yS1   mdm_command: string 'AT+FCLASS=2.0'
10/27 13:36:45 yS1    got:[0d][0a]OK[0d]
10/27 13:36:45 yS1   mdm_command: string 'OK' -> OK
10/27 13:36:45 yS1  mdm_send: 'AT+FLI="49 531 502143"'
10/27 13:36:45 yS1    got:[0a]AT+FLI="49 531 502143"[0d]
10/27 13:36:45 yS1   mdm_command: string 'AT+FLI="49 531 502143"'
10/27 13:36:45 yS1    got:[0d][0a]OK[0d]
10/27 13:36:45 yS1   mdm_command: string 'OK' -> OK
10/27 13:36:45 yS1  mdm_send: 'AT+FCC=1,5,0,2,0,0,0,0'
10/27 13:36:45 yS1    got:[0a]AT+FCC=1,5,0,2,0,0,0,0[0d]
10/27 13:36:45 yS1   mdm_command: string 'AT+FCC=1,5,0,2,0,0,0,0'
10/27 13:36:45 yS1    got:[0d][0a]OK[0d]
10/27 13:36:45 yS1   mdm_command: string 'OK' -> OK
10/27 13:36:45 yS1  mdm_send: 'AT+FBO=0'
10/27 13:36:45 yS1    got:[0a]AT+FBO=0[0d]
10/27 13:36:45 yS1   mdm_command: string 'AT+FBO=0'
10/27 13:36:45 yS1    got:[0d][0a]OK[0d]
10/27 13:36:45 yS1   mdm_command: string 'OK' -> OK
10/27 13:36:45 yS1  mdm_send: 'AT+FNR=1,1,1,0'
10/27 13:36:45 yS1    got:[0a]AT+FNR=1,1,1,0[0d]
10/27 13:36:45 yS1   mdm_command: string 'AT+FNR=1,1,1,0'
10/27 13:36:45 yS1    got:[0d][0a]OK[0d]
10/27 13:36:45 yS1   mdm_command: string 'OK' -> OK
10/27 13:36:46 yS1  mdm_send: 'AT+FLO=2'
10/27 13:36:46 yS1    got:[0a]AT+FLO=2[0d]
10/27 13:36:46 yS1   mdm_command: string 'AT+FLO=2'
10/27 13:36:46 yS1    got:[0d][0a]OK[0d]
10/27 13:36:46 yS1   mdm_command: string 'OK' -> OK
10/27 13:36:46 yS1  mdm_send: 'AT\Q3&S0'
10/27 13:36:46 yS1    got:[0a]AT\Q3&S0[0d]
10/27 13:36:46 yS1   mdm_command: string 'AT\Q3&S0'
10/27 13:36:46 yS1    got:[0d][0a]ERROR[0d]
10/27 13:36:46 yS1   mdm_command: string 'ERROR' -> ERROR
10/27 13:36:46 yS1  cannot set 'modem_handshake'; ignored
10/27 13:36:46 yS1  fax_send: 'ATDT502143'
10/27 13:36:46 yS1  fax_wait_for(OK)
10/27 13:36:46 yS1    got:[0a]ATDT502143[0d]
10/27 13:36:46 yS1   fax_wait_for: string 'ATDT502143'
10/27 13:36:46 yS1    got:
10/27 13:36:46 yS1  mdm_read_byte: read returned 0: Success
10/27 13:36:46 yS1  mdm_get_line: cannot read byte, return: Success
10/27 13:36:46 ##### failed dialing, phone="502143", +FHS:-5, dev=ttyS1, time=0s
, acct=""

10/27 13:36:46 yS1  fax_send: 'AT+FCLASS=0'
10/27 13:36:46 yS1   removing lock file
-----------------------------------------------------------------------
#
# sendfax configuration file
#
# this is a sample configuration file, see mgetty.info for details
#
# comment lines start with a "#", empty lines are ignored


# ----- global section -----
#
# In this section, you put the global defaults, per-port stuff is below

# tell everybody what's going on
verbose y

# ... and send everything to the log file (quite detailed)
debug 9

# which devices to use for outgoing faxes
fax-devices ttyS1:ttyS2

# which fax number to transmit to the receiving station
fax-id 49 531 502143

# which command is used to dial out? (Could be ATD, ATDP, ATX3D0W...)
dial-prefix ATD

# try transmitting every page three times, continue if 3rd try fails as well
max-tries 3
max-tries-continue y
open-delay 1500
ignore-carrier yes