How to set up dial in and out with mgetty
"KIM YONG" (qkim@jeack.com.au)
Thu, 11 Nov 1999 20:58:54 +1100
Thanks for your reply and i take this opportunity to send you part ot the
log files
/var/log/messages
### ppp-on started manually - OK ####
Nov 9 09:13:55 postman kernel: CSLIP: code copyright 1989 Regents of
the University of California
Nov 9 09:13:55 postman kernel: PPP: version 2.3.3 (demand dialling)
Nov 9 09:13:55 postman kernel: PPP line discipline registered.
Nov 9 09:13:55 postman kernel: registered device ppp0
Nov 9 09:13:55 postman pppd[11190]: pppd 2.3.7 started by root, uid 0
Nov 9 09:13:56 postman chat[11192]: timeout set to 3 seconds
Nov 9 09:13:56 postman chat[11192]: send (AT^M)
Nov 9 09:13:56 postman chat[11192]: expect (OK)
Nov 9 09:13:56 postman chat[11192]: AT^M^M
Nov 9 09:13:56 postman chat[11192]: OK
Nov 9 09:13:56 postman chat[11192]: -- got it
Nov 9 09:13:56 postman chat[11195]: abort on (\nBUSY\r)
Nov 9 09:13:56 postman chat[11195]: abort on (\nNO ANSWER\r)
Nov 9 09:13:56 postman chat[11195]: abort on
(\nRINGING\r\n\r\nRINGING\r)
Nov 9 09:13:56 postman chat[11195]: send (ATDT0198303030^M)
Nov 9 09:13:56 postman chat[11195]: expect (CONNECT)
Nov 9 09:13:56 postman chat[11195]: ^M
Nov 9 09:14:25 postman chat[11195]: ATDT0198303030^M^M
Nov 9 09:14:25 postman chat[11195]: CONNECT
Nov 9 09:14:25 postman chat[11195]: -- got it
Nov 9 09:14:25 postman chat[11195]: send (^M)
Nov 9 09:14:25 postman pppd[11190]: Serial connection established.
Nov 9 09:14:25 postman pppd[11190]: Using interface ppp0
Nov 9 09:14:25 postman pppd[11190]: Connect: ppp0 <--> /dev/ttyS0
Nov 9 09:14:26 postman pppd[11190]: Remote message: ^D^EM-t^B^F
Nov 9 09:14:26 postman modprobe: can't locate module ppp-compress-21
Nov 9 09:14:26 postman modprobe: can't locate module ppp-compress-26
Nov 9 09:14:26 postman modprobe: can't locate module ppp-compress-24
Nov 9 09:14:26 postman pppd[11190]: Unsupported protocol (0x802b)
received
Nov 9 09:14:27 postman pppd[11190]: local IP address 203.40.35.68
Nov 9 09:14:27 postman pppd[11190]: remote IP address 144.130.30.226
Nov 9 09:17:26 postman pppd[11190]: Connection terminated.
Nov 9 09:17:26 postman pppd[11190]: Connect time 3.1 minutes.
Nov 9 09:17:26 postman pppd[11190]: Sent 374 bytes, received 485
bytes.
Nov 9 09:17:26 postman pppd[11190]: Hangup (SIGHUP)
Nov 9 09:17:26 postman pppd[11190]: Exit.
## ## remote login fine with mgetty
Nov 9 09:18:21 postman mgetty[11271]: data dev=ttyS0, pid=11271,
caller='none', conn='31200/ARQ/V34/LAPM/V42BIS', name='',
cmd='/bin/login', user='kim'
Nov 9 09:18:26 postman PAM_pwdb[11271]: (login) session opened for
user kim by (uid=0)
Nov 9 09:20:09 postman PAM_pwdb[11230]: (login) session closed for
user kim
Nov 9 09:20:44 postman PAM_pwdb[11271]: (login) session closed for
user kim
### cron starting ppp-on - does not connect #####
Nov 9 09:30:00 postman kernel: PPP: ppp line discipline successfully
unregistered
Nov 9 09:30:00 postman kernel: CSLIP: code copyright 1989 Regents of
the University of California
Nov 9 09:30:00 postman kernel: PPP: version 2.3.3 (demand dialling)
Nov 9 09:30:00 postman kernel: PPP line discipline registered.
Nov 9 09:30:00 postman kernel: registered device ppp0
Nov 9 09:30:00 postman mgetty[11304]: tcgetattr failed: Input/output
error
Nov 9 09:30:00 postman mgetty[11304]: tcsetattr failed: Input/output
error
Nov 9 09:30:10 postman mgetty[11304]: tcsetattr failed: Input/output
error
Nov 9 09:30:20 postman kernel: PPP: ppp line discipline successfully
unregistered
##### /var/log/mgetty.ttyS0
--
11/09 09:17:35 yS0 mgetty: experimental test release 1.1.14-Apr02
11/09 09:17:35 yS0 check for lockfiles
11/09 09:17:35 yS0 locking the line
11/09 09:17:35 yS0 lowering DTR to reset Modem
11/09 09:17:36 yS0 send: \dATQ0V1H0[0d]
11/09 09:17:36 yS0 waiting for ``OK'' ** found **
11/09 09:17:37 yS0 send: ATS0=0Q0&D3&C1[0d]
11/09 09:17:37 yS0 waiting for ``OK'' ** found **
11/09 09:17:37 yS0 waiting...
11/09 09:18:07 yS0 waiting for ``RING'' ** found **
11/09 09:18:07 yS0 send: ATA[0d]
11/09 09:18:07 yS0 waiting for ``CONNECT'' ** found **
11/09 09:18:18 yS0 send:
11/09 09:18:18 yS0 waiting for ``_'' ** found **
11/09 09:18:21 ##### data dev=ttyS0, pid=11271, caller='none',
conn='31200/ARQ/V34/LAPM/V42BIS', name='', cmd='/bin/login',
user='kim'
--
11/09 09:20:44 yS0 mgetty: experimental test release 1.1.14-Apr02
11/09 09:20:44 yS0 check for lockfiles
11/09 09:20:44 yS0 locking the line
11/09 09:20:45 yS0 lowering DTR to reset Modem
11/09 09:20:45 yS0 send: \dATQ0V1H0[0d]
11/09 09:20:46 yS0 waiting for ``OK'' ** found **
11/09 09:20:46 yS0 send: ATS0=0Q0&D3&C1[0d]
11/09 09:20:46 yS0 waiting for ``OK'' ** found **
11/09 09:20:47 yS0 waiting...
11/09 09:30:00 yS0 tcgetattr failed: Input/output error
11/09 09:30:00 yS0 tcsetattr failed: Input/output error
11/09 09:30:00 yS0 waiting for ``RING''
11/09 09:30:10 yS0 timeout in chat script, waiting for `RING'
11/09 09:30:10 yS0 tcsetattr failed: Input/output error
11/09 09:30:10 yS0 huh? Junk on the line?
--
-----Original Message-----
From: Gert Doering <gert@greenie.muc.de>
To: tykq <qkim@jeack.com.au>; mgetty@muc.de <mgetty@muc.de>
Date: Thursday, 11 November 1999 9:00
Subject: Re: How to set up dial in and out with mgetty
>Hi,
>
>- show logfiles from mgetty and pppd/chat
>- check lockfiles
>
>gert
>
>On Wed, Nov 10, 1999 at 08:51:03AM +0000, tykq wrote:
>> Hi
>> i'm trying to setup my linux box RH6.0 to be able to dial out and in
>> (off course not at the same time) using the same modem a USR 56K.
>> When i have the mgetty running i can dial into the linux but i can't
>> dial out. I have a cron job dialing out to my isp on the hour using
>> ppp-on script. The /var/log/message says
>> kernel: PPP: version 2.3.3 (demand polling)
>> ppp line discipline registered
>> mgetty[111212] tcgetattr failed: Input/Output error
>> tcsetattr failed: Input/Output error
>> tcsetattr failed: Input/Output error
>> kernel: PPP: ppp line discipline successfuly unregistered
>>
>> On the other hand if i start the ppp-on script by hand the connection
>> to the isp works fine. And trying to dial in returns a busy signal
>> which is ok
>>
>> pppd: pppd startted by root
>> and the chat script takes over and every works fine
>>
>> Please help, i am sure many of you have a similar set up working
>>
>> kim
>> qkim@jeack.com.au
>
>--
>USENET is *not* the non-clickable part of WWW!
>
//www.muc.de/~gert/
>Gert Doering - Munich, Germany
gert@greenie.muc.de
>fax: +49-89-35655025
gert.doering@physik.tu-muenchen.de
>