vgetty problem with Rockwell

• Messages sorted by:[ date ][ thread ][ subject ][ author ]

Hi,

I am Attila from Hungary - quite new to the world of Linux.

I am running RedHat 6.1 kernel: 2.2.12-20, my modem is a Rockwell 28.8
voice,fax,data - Phone Blaster. It is put on one board with my SB
soundcard.

I successfully installed mgetty and I can use it without any problem.
I also tried to get vgetty running but did not succeed. I get the
followings to the log file:

11/21 14:48:49 yS1  reading program vgetty configuration from config
file /etc/mgetty+sendfax/voice.conf
11/21 14:48:49 yS1  reading port ttyS1 configuration from config file
/etc/mgetty+sendfax/voice.conf
11/21 14:48:49 yS1  check for lockfiles
11/21 14:48:49 yS1  locking the line
11/21 14:48:49 yS1  lowering DTR to reset Modem
11/21 14:48:50 yS1  send: \dATQ0V1H0[0d]
11/21 14:48:51 yS1  waiting for ``OK'' ** found **
11/21 14:48:51 yS1  send: ATS0=3D0Q0&D3&C1[0d]
11/21 14:48:51 yS1  waiting for ``OK'' ** found **
11/21 14:48:51 yS1  mdm_send: 'ATI'
11/21 14:48:51 yS1  Generic Rockwell modem (28800)
11/21 14:48:51 yS1  mdm_send: 'ATI3'
11/21 14:48:51 yS1  mdm_send: 'ATI4'
11/21 14:48:51 yS1  additional info: 'PhoneBlaster 288'
11/21 14:48:51 yS1  modem quirks: 0004
11/21 14:48:51 yS1  mdm_send: 'AT+FCLASS=3D2' -> OK
11/21 14:48:52 yS1  mdm_send: 'AT+FCLASS=3D0' -> OK
11/21 14:48:52 yS1  mdm_send: 'AT+FAA=3D1;+FCR=3D1' -> OK
11/21 14:48:52 yS1  mdm_send: 'AT+FBOR=3D0' -> OK
11/21 14:48:52 yS1  mdm_send: 'AT+FLID=3D"+36 1 3144080"' -> OK
11/21 14:48:52 yS1  mdm_send: 'AT+FDCC=3D1,5,0,2,0,0,0,0' -> OK
11/21 14:48:53 yS1  detecting voice modem type
11/21 14:48:55 yS1  no voice modem detected

So for me it seems that vgetty does no recognises my modem as voice.

I would be most gratefull if someone could help what to do.

Attila