[ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 3.2.1-gentoo-r2 (root@livecd) (gcc version 4.5.3 (Gentoo 4.5.3-r2 p1.2, pie-0.4.7) ) #1 SMP PREEMPT Sat Apr 21 17:58:32 EDT 2012 [ 0.000000] Command line: root=/dev/sda2 [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable) [ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000cfde0000 (usable) [ 0.000000] BIOS-e820: 00000000cfde0000 - 00000000cfde3000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000cfde3000 - 00000000cfdf0000 (ACPI data) [ 0.000000] BIOS-e820: 00000000cfdf0000 - 00000000cfe00000 (reserved) [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) [ 0.000000] BIOS-e820: 0000000100000000 - 0000000228000000 (usable) [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] DMI 2.4 present. [ 0.000000] DMI: Gigabyte Technology Co., Ltd. GA-MA780G-UD3H/GA-MA780G-UD3H, BIOS F1 12/30/2008 [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable) [ 0.000000] No AGP bridge found [ 0.000000] last_pfn = 0x228000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-C7FFF write-protect [ 0.000000] C8000-FFFFF uncachable [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back [ 0.000000] 1 base 000080000000 mask FFFFC0000000 write-back [ 0.000000] 2 base 0000C0000000 mask FFFFF0000000 write-back [ 0.000000] 3 base 0000CFE00000 mask FFFFFFE00000 uncachable [ 0.000000] 4 base 000100000000 mask FFFF00000000 write-back [ 0.000000] 5 base 000200000000 mask FFFFE0000000 write-back [ 0.000000] 6 base 000220000000 mask FFFFF8000000 write-back [ 0.000000] 7 disabled [ 0.000000] TOM2: 0000000228000000 aka 8832M [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] e820 update range: 00000000cfe00000 - 0000000100000000 (usable) ==> (reserved) [ 0.000000] last_pfn = 0xcfde0 max_arch_pfn = 0x400000000 [ 0.000000] found SMP MP-table at [ffff8800000f5880] f5880 [ 0.000000] initial memory mapped : 0 - 20000000 [ 0.000000] Base memory trampoline at [ffff88000009d000] 9d000 size 8192 [ 0.000000] Using GB pages for direct mapping [ 0.000000] init_memory_mapping: 0000000000000000-00000000cfde0000 [ 0.000000] 0000000000 - 00c0000000 page 1G [ 0.000000] 00c0000000 - 00cfc00000 page 2M [ 0.000000] 00cfc00000 - 00cfde0000 page 4k [ 0.000000] kernel direct mapping tables up to cfde0000 @ 1fffd000-20000000 [ 0.000000] init_memory_mapping: 0000000100000000-0000000228000000 [ 0.000000] 0100000000 - 0200000000 page 1G [ 0.000000] 0200000000 - 0228000000 page 2M [ 0.000000] kernel direct mapping tables up to 228000000 @ cfdde000-cfde0000 [ 0.000000] [ffffea0000000000-ffffea00089fffff] PMD -> [ffff88021f800000-ffff8802275fffff] on node 0 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal 0x00100000 -> 0x00228000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[3] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x000cfde0 [ 0.000000] 0: 0x00100000 -> 0x00228000 [ 0.000000] On node 0 totalpages: 2063727 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 2 pages reserved [ 0.000000] DMA zone: 3917 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 16320 pages used for memmap [ 0.000000] DMA32 zone: 831008 pages, LIFO batch:31 [ 0.000000] Normal zone: 18944 pages used for memmap [ 0.000000] Normal zone: 1193472 pages, LIFO batch:31 [ 0.000000] Intel MultiProcessor Specification v1.4 [ 0.000000] MPTABLE: OEM ID: OEM00000 [ 0.000000] MPTABLE: Product ID: PROD00000000 [ 0.000000] MPTABLE: APIC at: 0xFEE00000 [ 0.000000] Processor #0 (Bootup-CPU) [ 0.000000] Processor #1 [ 0.000000] Processor #2 [ 0.000000] Processor #3 [ 0.000000] IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23 [ 0.000000] Processors: 4 [ 0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] Allocating PCI resources starting at cfe00000 (gap: cfe00000:10200000) [ 0.000000] setup_percpu: NR_CPUS:4 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 25 pages/cpu @ffff880227c00000 s71040 r8192 d23168 u524288 [ 0.000000] pcpu-alloc: s71040 r8192 d23168 u524288 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2028397 [ 0.000000] Kernel command line: root=/dev/sda2 [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Node 0: aperture @ c4000000 size 32 MB [ 0.000000] Aperture pointing to e820 RAM. Ignoring. [ 0.000000] Your BIOS doesn't leave a aperture memory hole [ 0.000000] Please enable the IOMMU option in the BIOS setup [ 0.000000] This costs you 64 MB of RAM [ 0.000000] Mapping aperture over 65536 KB of RAM @ c4000000 [ 0.000000] Memory: 7974408k/9043968k available (4071k kernel code, 789060k absent, 280500k reserved, 1936k data, 436k init) [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] CONFIG_RCU_FANOUT set to non-default value of 32 [ 0.000000] NR_IRQS:4352 nr_irqs:712 16 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 2305.122 MHz processor. [ 0.003337] Calibrating delay loop (skipped), value calculated using timer frequency.. 4612.33 BogoMIPS (lpj=7683740) [ 0.003405] pid_max: default: 32768 minimum: 301 [ 0.003468] Mount-cache hash table entries: 256 [ 0.003627] tseg: 00cfe00000 [ 0.003629] CPU: Physical Processor ID: 0 [ 0.003658] CPU: Processor Core ID: 0 [ 0.003691] mce: CPU supports 6 MCE banks [ 0.003731] using AMD E400 aware idle routine [ 0.003840] Freeing SMP alternatives: 16k freed [ 0.004019] ExtINT not setup in hardware but reported by MP table [ 0.004552] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0 [ 0.038429] CPU0: AMD Phenom(tm) 9650 Quad-Core Processor stepping 03 [ 0.143340] Performance Events: AMD PMU driver. [ 0.143383] ... version: 0 [ 0.143417] ... bit width: 48 [ 0.143442] ... generic registers: 4 [ 0.143475] ... value mask: 0000ffffffffffff [ 0.143508] ... max period: 00007fffffffffff [ 0.143541] ... fixed-purpose events: 0 [ 0.143574] ... event mask: 000000000000000f [ 0.143636] System has AMD C1E enabled [ 0.143674] Switch to broadcast mode on CPU0 [ 0.190003] Booting Node 0, Processors #1 [ 0.190021] smpboot cpu 1: start_ip = 9d000 [ 0.006666] do_IRQ: 1.55 No irq handler for vector (irq -1) [ 0.286654] Switch to broadcast mode on CPU1 [ 0.299992] #2 [ 0.300001] smpboot cpu 2: start_ip = 9d000 [ 0.006666] do_IRQ: 2.55 No irq handler for vector (irq -1) [ 0.396645] Switch to broadcast mode on CPU2 [ 0.409984] #3 Ok. [ 0.410011] smpboot cpu 3: start_ip = 9d000 [ 0.006666] do_IRQ: 3.55 No irq handler for vector (irq -1) [ 0.506639] Brought up 4 CPUs [ 0.506638] Switch to broadcast mode on CPU3 [ 0.506730] Total of 4 processors activated (18446.08 BogoMIPS). [ 0.509168] devtmpfs: initialized [ 0.509416] NET: Registered protocol family 16 [ 0.509532] node 0 link 0: io port [c000, ffff] [ 0.509536] TOM: 00000000d8000000 aka 3456M [ 0.509569] Fam 10h mmconf [e0000000, e00fffff] [ 0.509572] node 0 link 0: mmio [a0000, bffff] [ 0.509575] node 0 link 0: mmio [d8000000, dfffffff] [ 0.509578] node 0 link 0: mmio [f0000000, fe02ffff] [ 0.509580] node 0 link 0: mmio [e0000000, e03fffff] ==> [e0100000, e03fffff] [ 0.509584] TOM2: 0000000228000000 aka 8832M [ 0.509617] bus: [00, 03] on node 0 link 0 [ 0.509620] bus: 00 index 0 [io 0x0000-0xffff] [ 0.509622] bus: 00 index 1 [mem 0x000a0000-0x000bffff] [ 0.509624] bus: 00 index 2 [mem 0xd8000000-0xdfffffff] [ 0.509626] bus: 00 index 3 [mem 0xe0400000-0xffffffff] [ 0.509628] bus: 00 index 4 [mem 0xe0100000-0xe03fffff] [ 0.509630] bus: 00 index 5 [mem 0x228000000-0xfcffffffff] [ 0.509640] Extended Config Space enabled on 1 nodes [ 0.509727] PCI: Using configuration type 1 for base access [ 0.509762] PCI: Using configuration type 1 for extended access [ 0.510509] bio: create slab at 0 [ 0.510626] vgaarb: loaded [ 0.510716] SCSI subsystem initialized [ 0.510783] libata version 3.00 loaded. [ 0.510804] usbcore: registered new interface driver usbfs [ 0.510849] usbcore: registered new interface driver hub [ 0.510906] usbcore: registered new device driver usb [ 0.510984] PCI: Probing PCI hardware [ 0.511018] PCI: Probing PCI hardware (bus 00) [ 0.511046] pci 0000:00:00.0: [1022:9600] type 0 class 0x000600 [ 0.511059] pci 0000:00:00.0: reg 1c: [mem 0xe0000000-0xffffffff 64bit] [ 0.511091] pci 0000:00:01.0: [1022:9602] type 1 class 0x000604 [ 0.511130] pci 0000:00:0a.0: [1022:9609] type 1 class 0x000604 [ 0.511156] pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold [ 0.511159] pci 0000:00:0a.0: PME# disabled [ 0.511185] pci 0000:00:11.0: [1002:4391] type 0 class 0x000106 [ 0.511204] pci 0000:00:11.0: reg 10: [io 0xff00-0xff07] [ 0.511214] pci 0000:00:11.0: reg 14: [io 0xfe00-0xfe03] [ 0.511224] pci 0000:00:11.0: reg 18: [io 0xfd00-0xfd07] [ 0.511234] pci 0000:00:11.0: reg 1c: [io 0xfc00-0xfc03] [ 0.511243] pci 0000:00:11.0: reg 20: [io 0xfb00-0xfb0f] [ 0.511253] pci 0000:00:11.0: reg 24: [mem 0xfe02f000-0xfe02f3ff] [ 0.511297] pci 0000:00:12.0: [1002:4397] type 0 class 0x000c03 [ 0.511311] pci 0000:00:12.0: reg 10: [mem 0xfe02e000-0xfe02efff] [ 0.511373] pci 0000:00:12.1: [1002:4398] type 0 class 0x000c03 [ 0.511387] pci 0000:00:12.1: reg 10: [mem 0xfe02d000-0xfe02dfff] [ 0.511455] pci 0000:00:12.2: [1002:4396] type 0 class 0x000c03 [ 0.511474] pci 0000:00:12.2: reg 10: [mem 0xfe02c000-0xfe02c0ff] [ 0.511543] pci 0000:00:12.2: supports D1 D2 [ 0.511545] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot [ 0.511549] pci 0000:00:12.2: PME# disabled [ 0.511570] pci 0000:00:13.0: [1002:4397] type 0 class 0x000c03 [ 0.511584] pci 0000:00:13.0: reg 10: [mem 0xfe02b000-0xfe02bfff] [ 0.511646] pci 0000:00:13.1: [1002:4398] type 0 class 0x000c03 [ 0.511660] pci 0000:00:13.1: reg 10: [mem 0xfe02a000-0xfe02afff] [ 0.511729] pci 0000:00:13.2: [1002:4396] type 0 class 0x000c03 [ 0.511748] pci 0000:00:13.2: reg 10: [mem 0xfe029000-0xfe0290ff] [ 0.511818] pci 0000:00:13.2: supports D1 D2 [ 0.511820] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot [ 0.511824] pci 0000:00:13.2: PME# disabled [ 0.511848] pci 0000:00:14.0: [1002:4385] type 0 class 0x000c05 [ 0.511938] pci 0000:00:14.1: [1002:439c] type 0 class 0x000101 [ 0.511955] pci 0000:00:14.1: reg 10: [io 0x0000-0x0007] [ 0.511965] pci 0000:00:14.1: reg 14: [io 0x0000-0x0003] [ 0.511974] pci 0000:00:14.1: reg 18: [io 0x0000-0x0007] [ 0.511984] pci 0000:00:14.1: reg 1c: [io 0x0000-0x0003] [ 0.511994] pci 0000:00:14.1: reg 20: [io 0xfa00-0xfa0f] [ 0.512040] pci 0000:00:14.3: [1002:439d] type 0 class 0x000601 [ 0.512114] pci 0000:00:14.4: [1002:4384] type 1 class 0x000604 [ 0.512154] pci 0000:00:14.5: [1002:4399] type 0 class 0x000c03 [ 0.512167] pci 0000:00:14.5: reg 10: [mem 0xfe028000-0xfe028fff] [ 0.512232] pci 0000:00:18.0: [1022:1200] type 0 class 0x000600 [ 0.512247] pci 0000:00:18.1: [1022:1201] type 0 class 0x000600 [ 0.512259] pci 0000:00:18.2: [1022:1202] type 0 class 0x000600 [ 0.512271] pci 0000:00:18.3: [1022:1203] type 0 class 0x000600 [ 0.512285] pci 0000:00:18.4: [1022:1204] type 0 class 0x000600 [ 0.512303] PCI: peer root bus 00 res updated from pci conf [ 0.512331] pci 0000:01:05.0: [1002:9610] type 0 class 0x000300 [ 0.512339] pci 0000:01:05.0: reg 10: [mem 0xd8000000-0xdfffffff pref] [ 0.512344] pci 0000:01:05.0: reg 14: [io 0xee00-0xeeff] [ 0.512349] pci 0000:01:05.0: reg 18: [mem 0xfdee0000-0xfdeeffff] [ 0.512359] pci 0000:01:05.0: reg 24: [mem 0xfdd00000-0xfddfffff] [ 0.512371] pci 0000:01:05.0: supports D1 D2 [ 0.512380] pci 0000:01:05.1: [1002:960f] type 0 class 0x000403 [ 0.512388] pci 0000:01:05.1: reg 10: [mem 0xfdefc000-0xfdefffff] [ 0.512413] pci 0000:01:05.1: supports D1 D2 [ 0.512450] pci 0000:00:01.0: PCI bridge to [bus 01-01] [ 0.512489] pci 0000:00:01.0: bridge window [io 0xe000-0xefff] [ 0.512492] pci 0000:00:01.0: bridge window [mem 0xfdd00000-0xfdefffff] [ 0.512496] pci 0000:00:01.0: bridge window [mem 0xd8000000-0xdfffffff 64bit pref] [ 0.512532] pci 0000:02:00.0: [10ec:8168] type 0 class 0x000200 [ 0.512545] pci 0000:02:00.0: reg 10: [io 0xde00-0xdeff] [ 0.512566] pci 0000:02:00.0: reg 18: [mem 0xfdfff000-0xfdffffff 64bit pref] [ 0.512580] pci 0000:02:00.0: reg 20: [mem 0xfdfe0000-0xfdfeffff 64bit pref] [ 0.512589] pci 0000:02:00.0: reg 30: [mem 0x00000000-0x0000ffff pref] [ 0.512618] pci 0000:02:00.0: supports D1 D2 [ 0.512620] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.512624] pci 0000:02:00.0: PME# disabled [ 0.516648] pci 0000:00:0a.0: PCI bridge to [bus 02-02] [ 0.516676] pci 0000:00:0a.0: bridge window [io 0xd000-0xdfff] [ 0.516679] pci 0000:00:0a.0: bridge window [mem 0xfda00000-0xfdafffff] [ 0.516683] pci 0000:00:0a.0: bridge window [mem 0xfdf00000-0xfdffffff 64bit pref] [ 0.516719] pci 0000:03:06.0: [10ec:8139] type 0 class 0x000200 [ 0.516740] pci 0000:03:06.0: reg 10: [io 0xce00-0xceff] [ 0.516753] pci 0000:03:06.0: reg 14: [mem 0xfdcff000-0xfdcff0ff] [ 0.516807] pci 0000:03:06.0: reg 30: [mem 0x00000000-0x0000ffff pref] [ 0.516830] pci 0000:03:06.0: supports D1 D2 [ 0.516832] pci 0000:03:06.0: PME# supported from D1 D2 D3hot D3cold [ 0.516837] pci 0000:03:06.0: PME# disabled [ 0.516858] pci 0000:03:07.0: [10ec:8139] type 0 class 0x000200 [ 0.516879] pci 0000:03:07.0: reg 10: [io 0xcc00-0xccff] [ 0.516891] pci 0000:03:07.0: reg 14: [mem 0xfdcfe000-0xfdcfe0ff] [ 0.516945] pci 0000:03:07.0: reg 30: [mem 0x00000000-0x0000ffff pref] [ 0.516969] pci 0000:03:07.0: supports D1 D2 [ 0.516971] pci 0000:03:07.0: PME# supported from D1 D2 D3hot D3cold [ 0.516976] pci 0000:03:07.0: PME# disabled [ 0.517006] pci 0000:03:0e.0: [104c:8024] type 0 class 0x000c00 [ 0.517029] pci 0000:03:0e.0: reg 10: [mem 0xfdcfd000-0xfdcfd7ff] [ 0.517043] pci 0000:03:0e.0: reg 14: [mem 0xfdcf8000-0xfdcfbfff] [ 0.517122] pci 0000:03:0e.0: supports D1 D2 [ 0.517124] pci 0000:03:0e.0: PME# supported from D0 D1 D2 D3hot [ 0.517129] pci 0000:03:0e.0: PME# disabled [ 0.517162] pci 0000:00:14.4: PCI bridge to [bus 03-03] (subtractive decode) [ 0.517192] pci 0000:00:14.4: bridge window [io 0xc000-0xcfff] [ 0.517202] pci 0000:00:14.4: bridge window [mem 0xfdc00000-0xfdcfffff] [ 0.517206] pci 0000:00:14.4: bridge window [mem 0xfdb00000-0xfdbfffff pref] [ 0.517209] pci 0000:00:14.4: bridge window [io 0x0000-0xffff] (subtractive decode) [ 0.517211] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) [ 0.517214] pci 0000:00:14.4: bridge window [mem 0xd8000000-0xdfffffff] (subtractive decode) [ 0.517217] pci 0000:00:14.4: bridge window [mem 0xe0400000-0xffffffff] (subtractive decode) [ 0.517219] pci 0000:00:14.4: bridge window [mem 0xe0100000-0xe03fffff] (subtractive decode) [ 0.517222] pci 0000:00:14.4: bridge window [mem 0x228000000-0xfcffffffff] (subtractive decode) [ 0.517561] vgaarb: device added: PCI:0000:01:05.0,decodes=io+mem,owns=io+mem,locks=none [ 0.518127] PCI: pci_cache_line_size set to 64 bytes [ 0.518134] pci 0000:00:00.0: no compatible bridge window for [mem 0xe0000000-0xffffffff 64bit] [ 0.518246] Expanded resource reserved due to conflict with PCI Bus #00 [ 0.518281] reserve RAM buffer: 000000000009f800 - 000000000009ffff [ 0.518284] reserve RAM buffer: 00000000cfde0000 - 00000000cfffffff [ 0.519646] PCI: max bus depth: 1 pci_try_num: 2 [ 0.519661] pci 0000:00:01.0: PCI bridge to [bus 01-01] [ 0.519689] pci 0000:00:01.0: bridge window [io 0xe000-0xefff] [ 0.519725] pci 0000:00:01.0: bridge window [mem 0xfdd00000-0xfdefffff] [ 0.519761] pci 0000:00:01.0: bridge window [mem 0xd8000000-0xdfffffff 64bit pref] [ 0.519816] pci 0000:02:00.0: BAR 6: assigned [mem 0xfdf00000-0xfdf0ffff pref] [ 0.519969] pci 0000:00:0a.0: PCI bridge to [bus 02-02] [ 0.519996] pci 0000:00:0a.0: bridge window [io 0xd000-0xdfff] [ 0.520037] pci 0000:00:0a.0: bridge window [mem 0xfda00000-0xfdafffff] [ 0.520066] pci 0000:00:0a.0: bridge window [mem 0xfdf00000-0xfdffffff 64bit pref] [ 0.520124] pci 0000:03:06.0: BAR 6: assigned [mem 0xfdb00000-0xfdb0ffff pref] [ 0.520182] pci 0000:03:07.0: BAR 6: assigned [mem 0xfdb10000-0xfdb1ffff pref] [ 0.520226] pci 0000:00:14.4: PCI bridge to [bus 03-03] [ 0.520258] pci 0000:00:14.4: bridge window [io 0xc000-0xcfff] [ 0.520294] pci 0000:00:14.4: bridge window [mem 0xfdc00000-0xfdcfffff] [ 0.520329] pci 0000:00:14.4: bridge window [mem 0xfdb00000-0xfdbfffff pref] [ 0.520403] pci 0000:00:0a.0: PCI->APIC IRQ transform: INT A -> IRQ 18 [ 0.520439] pci 0000:00:0a.0: setting latency timer to 64 [ 0.520446] pci_bus 0000:00: resource 4 [io 0x0000-0xffff] [ 0.520449] pci_bus 0000:00: resource 5 [mem 0x000a0000-0x000bffff] [ 0.520451] pci_bus 0000:00: resource 6 [mem 0xd8000000-0xdfffffff] [ 0.520453] pci_bus 0000:00: resource 7 [mem 0xe0400000-0xffffffff] [ 0.520456] pci_bus 0000:00: resource 8 [mem 0xe0100000-0xe03fffff] [ 0.520458] pci_bus 0000:00: resource 9 [mem 0x228000000-0xfcffffffff] [ 0.520460] pci_bus 0000:01: resource 0 [io 0xe000-0xefff] [ 0.520462] pci_bus 0000:01: resource 1 [mem 0xfdd00000-0xfdefffff] [ 0.520465] pci_bus 0000:01: resource 2 [mem 0xd8000000-0xdfffffff 64bit pref] [ 0.520467] pci_bus 0000:02: resource 0 [io 0xd000-0xdfff] [ 0.520469] pci_bus 0000:02: resource 1 [mem 0xfda00000-0xfdafffff] [ 0.520472] pci_bus 0000:02: resource 2 [mem 0xfdf00000-0xfdffffff 64bit pref] [ 0.520474] pci_bus 0000:03: resource 0 [io 0xc000-0xcfff] [ 0.520476] pci_bus 0000:03: resource 1 [mem 0xfdc00000-0xfdcfffff] [ 0.520478] pci_bus 0000:03: resource 2 [mem 0xfdb00000-0xfdbfffff pref] [ 0.520481] pci_bus 0000:03: resource 4 [io 0x0000-0xffff] [ 0.520483] pci_bus 0000:03: resource 5 [mem 0x000a0000-0x000bffff] [ 0.520485] pci_bus 0000:03: resource 6 [mem 0xd8000000-0xdfffffff] [ 0.520487] pci_bus 0000:03: resource 7 [mem 0xe0400000-0xffffffff] [ 0.520490] pci_bus 0000:03: resource 8 [mem 0xe0100000-0xe03fffff] [ 0.520492] pci_bus 0000:03: resource 9 [mem 0x228000000-0xfcffffffff] [ 0.520516] NET: Registered protocol family 2 [ 0.520607] IP route cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.521287] TCP established hash table entries: 262144 (order: 10, 4194304 bytes) [ 0.522738] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.523145] TCP: Hash tables configured (established 262144 bind 65536) [ 0.523180] TCP reno registered [ 0.523215] UDP hash table entries: 4096 (order: 5, 131072 bytes) [ 0.523359] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes) [ 0.523504] NET: Registered protocol family 1 [ 0.856630] pci 0000:01:05.0: Boot video device [ 0.856643] PCI: CLS 4 bytes, default 64 [ 0.856901] PCI-DMA: Disabling AGP. [ 0.857014] PCI-DMA: aperture base @ c4000000 size 65536 KB [ 0.857048] PCI-DMA: using GART IOMMU. [ 0.857083] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture [ 0.860697] platform rtc_cmos: registered platform RTC device (no PNP device found) [ 0.861015] IBS: LVT offset 1 assigned [ 0.861061] perf: AMD IBS detected (0x00000007) [ 0.861261] microcode: no support for this CPU vendor [ 0.861315] cryptomgr_test used greatest stack depth: 7264 bytes left [ 0.861348] cryptomgr_test used greatest stack depth: 6720 bytes left [ 0.861433] Intel AES-NI instructions are not detected. [ 0.861433] Intel PCLMULQDQ-NI instructions are not detected. [ 0.861433] sha1_ssse3: Neither AVX nor SSSE3 is available/usable. [ 0.886120] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.935902] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.936408] msgmni has been set to 15703 [ 0.937518] NET: Registered protocol family 38 [ 0.937587] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.937638] io scheduler noop registered [ 0.937696] io scheduler cfq registered (default) [ 0.937769] xz_dec_test: module loaded [ 0.937802] xz_dec_test: Create a device node with 'mknod xz_dec_test c 252 0' and write .xz files to it. [ 0.937934] pcieport 0000:00:0a.0: setting latency timer to 64 [ 0.939954] Linux agpgart interface v0.103 [ 0.939989] Hangcheck: starting hangcheck timer 0.9.1 (tick is 180 seconds, margin is 60 seconds). [ 0.940039] Hangcheck: Using getrawmonotonic(). [ 0.940105] [drm] Initialized drm 1.1.0 20060810 [ 0.940619] loop: module loaded [ 0.940728] ahci 0000:00:11.0: version 3.0 [ 0.940748] ahci 0000:00:11.0: PCI->APIC IRQ transform: INT A -> IRQ 22 [ 0.941379] ahci 0000:00:11.0: AHCI 0001.0100 32 slots 6 ports 3 Gbps 0x3f impl SATA mode [ 0.941431] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc [ 0.942121] scsi0 : ahci [ 0.942212] scsi1 : ahci [ 0.942287] scsi2 : ahci [ 0.942361] scsi3 : ahci [ 0.942435] scsi4 : ahci [ 0.942509] scsi5 : ahci [ 0.942569] ata1: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f100 irq 22 [ 0.942620] ata2: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f180 irq 22 [ 0.942664] ata3: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f200 irq 22 [ 0.942712] ata4: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f280 irq 22 [ 0.942760] ata5: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f300 irq 22 [ 0.942808] ata6: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f380 irq 22 [ 0.942915] pata_atiixp 0000:00:14.1: PCI->APIC IRQ transform: INT A -> IRQ 18 [ 0.943169] scsi6 : pata_atiixp [ 0.943240] scsi7 : pata_atiixp [ 0.943297] ata7: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xfa00 irq 14 [ 0.943330] ata8: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xfa08 irq 15 [ 0.943538] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.943626] ehci_hcd 0000:00:12.2: PCI->APIC IRQ transform: INT B -> IRQ 17 [ 0.943681] ehci_hcd 0000:00:12.2: EHCI Host Controller [ 0.943737] ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1 [ 0.943795] ehci_hcd 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 0.943860] QUIRK: Enable AMD PLL fix [ 0.943862] ehci_hcd 0000:00:12.2: applying AMD SB600/SB700 USB freeze workaround [ 0.943925] ehci_hcd 0000:00:12.2: debug port 1 [ 0.943979] ehci_hcd 0000:00:12.2: irq 17, io mem 0xfe02c000 [ 0.953278] ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00 [ 0.953407] hub 1-0:1.0: USB hub found [ 0.953442] hub 1-0:1.0: 6 ports detected [ 0.953532] ehci_hcd 0000:00:13.2: PCI->APIC IRQ transform: INT B -> IRQ 19 [ 0.953574] ehci_hcd 0000:00:13.2: EHCI Host Controller [ 0.953613] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2 [ 0.953673] ehci_hcd 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 0.953732] ehci_hcd 0000:00:13.2: applying AMD SB600/SB700 USB freeze workaround [ 0.953790] ehci_hcd 0000:00:13.2: debug port 1 [ 0.953844] ehci_hcd 0000:00:13.2: irq 19, io mem 0xfe029000 [ 0.963279] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00 [ 0.963385] hub 2-0:1.0: USB hub found [ 0.963420] hub 2-0:1.0: 6 ports detected [ 0.963502] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.963550] ohci_hcd 0000:00:12.0: PCI->APIC IRQ transform: INT A -> IRQ 16 [ 0.963593] ohci_hcd 0000:00:12.0: OHCI Host Controller [ 0.963629] ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 3 [ 0.963700] ohci_hcd 0000:00:12.0: irq 16, io mem 0xfe02e000 [ 1.020825] hub 3-0:1.0: USB hub found [ 1.020863] hub 3-0:1.0: 3 ports detected [ 1.020934] ohci_hcd 0000:00:12.1: PCI->APIC IRQ transform: INT A -> IRQ 16 [ 1.020976] ohci_hcd 0000:00:12.1: OHCI Host Controller [ 1.021018] ohci_hcd 0000:00:12.1: new USB bus registered, assigned bus number 4 [ 1.021082] ohci_hcd 0000:00:12.1: irq 16, io mem 0xfe02d000 [ 1.077491] hub 4-0:1.0: USB hub found [ 1.077529] hub 4-0:1.0: 3 ports detected [ 1.077600] ohci_hcd 0000:00:13.0: PCI->APIC IRQ transform: INT A -> IRQ 18 [ 1.077642] ohci_hcd 0000:00:13.0: OHCI Host Controller [ 1.077679] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 5 [ 1.077750] ohci_hcd 0000:00:13.0: irq 18, io mem 0xfe02b000 [ 1.103714] ata7.00: ATAPI: LITE-ON DVDRW SOHW-1213S, TS09, max UDMA/33 [ 1.120328] ata7.00: configured for UDMA/33 [ 1.134152] hub 5-0:1.0: USB hub found [ 1.134189] hub 5-0:1.0: 3 ports detected [ 1.134261] ohci_hcd 0000:00:13.1: PCI->APIC IRQ transform: INT A -> IRQ 18 [ 1.134303] ohci_hcd 0000:00:13.1: OHCI Host Controller [ 1.134341] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 6 [ 1.134401] ohci_hcd 0000:00:13.1: irq 18, io mem 0xfe02a000 [ 1.190788] hub 6-0:1.0: USB hub found [ 1.190825] hub 6-0:1.0: 3 ports detected [ 1.190896] ohci_hcd 0000:00:14.5: PCI->APIC IRQ transform: INT C -> IRQ 18 [ 1.190938] ohci_hcd 0000:00:14.5: OHCI Host Controller [ 1.190975] ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 7 [ 1.191042] ohci_hcd 0000:00:14.5: irq 18, io mem 0xfe028000 [ 1.247465] hub 7-0:1.0: USB hub found [ 1.247502] hub 7-0:1.0: 2 ports detected [ 1.247570] Initializing USB Mass Storage driver... [ 1.247637] usbcore: registered new interface driver usb-storage [ 1.247672] USB Mass Storage support registered. [ 1.247732] usbcore: registered new interface driver libusual [ 1.246456] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.246456] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 1.248571] mousedev: PS/2 mouse device common for all mice [ 1.248777] rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0 [ 1.248837] rtc0: alarms up to one day, 114 bytes nvram [ 1.248881] i2c /dev entries driver [ 1.248923] md: raid1 personality registered for level 1 [ 1.249060] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com [ 1.249173] cpuidle: using governor ladder [ 1.249326] usbcore: registered new interface driver usbhid [ 1.249360] usbhid: USB HID core driver [ 1.249394] Netfilter messages via NETLINK v0.30. [ 1.249442] nf_conntrack version 0.5.0 (16384 buckets, 65536 max) [ 1.249637] ctnetlink v0.93: registering with nfnetlink. [ 1.250014] ip_tables: (C) 2000-2006 Netfilter Core Team [ 1.250082] TCP cubic registered [ 1.250116] NET: Registered protocol family 17 [ 1.256606] ata6: SATA link down (SStatus 0 SControl 300) [ 1.256659] ata2: SATA link down (SStatus 0 SControl 300) [ 1.256719] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.259920] ata1.00: ATA-8: ST1000DM003-9YN162, CC4D, max UDMA/133 [ 1.259920] ata1.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA [ 1.259920] ata1.00: configured for UDMA/133 [ 1.262393] scsi 0:0:0:0: Direct-Access ATA ST1000DM003-9YN1 CC4D PQ: 0 ANSI: 5 [ 1.262613] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 1.262630] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) [ 1.262630] sd 0:0:0:0: [sda] 4096-byte physical blocks [ 1.262738] sd 0:0:0:0: [sda] Write Protect is off [ 1.262738] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.262776] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.263273] ata4: SATA link down (SStatus 0 SControl 300) [ 1.263327] ata5: SATA link down (SStatus 0 SControl 300) [ 1.266605] ata3: SATA link down (SStatus 0 SControl 300) [ 1.266662] scsi 6:0:0:0: CD-ROM LITE-ON DVDRW SOHW-1213S TS09 PQ: 0 ANSI: 5 [ 1.269231] sr0: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray [ 1.269267] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 1.272677] sr 6:0:0:0: Attached scsi CD-ROM sr0 [ 1.272776] sr 6:0:0:0: Attached scsi generic sg1 type 5 [ 1.272852] sda: sda1 sda2 [ 1.276150] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.288316] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 [ 1.608659] input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input1 [ 1.615312] md: Skipping autodetection of RAID arrays. (raid=autodetect will force) [ 1.673631] kjournald starting. Commit interval 5 seconds [ 1.673630] EXT3-fs (sda2): mounted filesystem with ordered data mode [ 1.673630] VFS: Mounted root (ext3 filesystem) readonly on device 8:2. [ 1.673630] Freeing unused kernel memory: 436k freed [ 1.863220] Switching to clocksource tsc [ 2.114811] kbd_mode used greatest stack depth: 5768 bytes left [ 2.136647] loadkeys used greatest stack depth: 3992 bytes left [ 2.694144] udevd[207]: starting version 171 [ 2.734546] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0 [ 2.831166] k10temp 0000:00:18.3: unreliable CPU thermal sensor; monitoring disabled [ 2.843449] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 2.843472] r8169 0000:02:00.0: PCI->APIC IRQ transform: INT A -> IRQ 18 [ 2.843534] r8169 0000:02:00.0: setting latency timer to 64 [ 2.843769] r8169 0000:02:00.0: eth0: RTL8168c/8111c at 0xffffc90000154000, 00:24:1d:27:bf:6f, XID 1c4000c0 IRQ 18 [ 2.843772] r8169 0000:02:00.0: eth0: jumbo features [frames: 6128 bytes, tx checksumming: ko] [ 2.867004] [drm] radeon defaulting to kernel modesetting. [ 2.867008] [drm] radeon kernel modesetting enabled. [ 2.867074] radeon 0000:01:05.0: PCI->APIC IRQ transform: INT A -> IRQ 18 [ 2.867079] radeon 0000:01:05.0: setting latency timer to 64 [ 2.867218] [drm] initializing kernel modesetting (RS780 0x1002:0x9610 0x1458:0xD000). [ 2.867249] [drm] register mmio base: 0xFDEE0000 [ 2.867250] [drm] register mmio size: 65536 [ 2.867602] ATOM BIOS: B27722 [ 2.867617] radeon 0000:01:05.0: VRAM: 128M 0x00000000C0000000 - 0x00000000C7FFFFFF (128M used) [ 2.867620] radeon 0000:01:05.0: GTT: 512M 0x00000000A0000000 - 0x00000000BFFFFFFF [ 2.869714] [drm] Detected VRAM RAM=128M, BAR=128M [ 2.869718] [drm] RAM width 32bits DDR [ 2.869791] [TTM] Zone kernel: Available graphics memory: 4020406 kiB. [ 2.869793] [TTM] Zone dma32: Available graphics memory: 2097152 kiB. [ 2.869795] [TTM] Initializing pool allocator. [ 2.869827] [drm] radeon: 128M of VRAM memory ready [ 2.869829] [drm] radeon: 512M of GTT memory ready. [ 2.869847] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). [ 2.869849] [drm] Driver supports precise vblank timestamp query. [ 2.869865] [drm] radeon: irq initialized. [ 2.869870] [drm] GART: num cpu pages 131072, num gpu pages 131072 [ 2.870666] [drm] Loading RS780 Microcode [ 2.875599] 8139too: 8139too Fast Ethernet driver 0.9.28 [ 2.875647] 8139too 0000:03:06.0: PCI->APIC IRQ transform: INT A -> IRQ 20 [ 2.876379] 8139too 0000:03:06.0: eth1: RealTek RTL8139 at 0xffffc9000014a000, 00:30:bd:1e:8f:b3, IRQ 20 [ 2.876401] 8139too 0000:03:07.0: PCI->APIC IRQ transform: INT A -> IRQ 21 [ 2.877088] 8139too 0000:03:07.0: eth2: RealTek RTL8139 at 0xffffc90000134000, 00:30:bd:1e:dd:7d, IRQ 21 [ 2.889880] udevd[220]: renamed network interface eth1 to eth3 [ 2.906509] udevd[219]: renamed network interface eth2 to eth1 [ 3.095048] r600_cp: Failed to load firmware "radeon/R600_rlc.bin" [ 3.095059] [drm:r600_startup] *ERROR* Failed to load firmware! [ 3.095063] radeon 0000:01:05.0: disabling GPU acceleration [ 3.096106] radeon 0000:01:05.0: ffff88021ded1c00 unpin not necessary [ 3.096109] radeon 0000:01:05.0: ffff88021ded1c00 unpin not necessary [ 3.096405] [drm] Radeon Display Connectors [ 3.096407] [drm] Connector 0: [ 3.096408] [drm] VGA [ 3.096411] [drm] DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48 0x7e4c 0x7e4c [ 3.096413] [drm] Encoders: [ 3.096414] [drm] CRT1: INTERNAL_KLDSCP_DAC1 [ 3.096416] [drm] Connector 1: [ 3.096417] [drm] DVI-D [ 3.096418] [drm] HPD1 [ 3.096420] [drm] DDC: 0x7e50 0x7e50 0x7e54 0x7e54 0x7e58 0x7e58 0x7e5c 0x7e5c [ 3.096422] [drm] Encoders: [ 3.096423] [drm] DFP1: INTERNAL_KLDSCP_LVTMA [ 3.096447] [drm] radeon: power management initialized [ 3.157379] [drm] fb mappable at 0xD8040000 [ 3.157381] [drm] vram apper at 0xD8000000 [ 3.157382] [drm] size 5242880 [ 3.157384] [drm] fb depth is 24 [ 3.157385] [drm] pitch is 5120 [ 3.157430] fbcon: radeondrmfb (fb0) is primary device [ 3.174303] Console: switching to colour frame buffer device 160x64 [ 3.178830] fb0: radeondrmfb frame buffer device [ 3.178831] drm: registered panic notifier [ 3.178837] [drm] Initialized radeon 2.12.0 20080528 for 0000:01:05.0 on minor 0 [ 3.179057] modprobe used greatest stack depth: 3768 bytes left [ 6.804915] EXT3-fs (sda2): using internal journal [ 7.778257] r8169 0000:02:00.0: eth0: link down [ 7.778272] r8169 0000:02:00.0: eth0: link down [ 9.455040] r8169 0000:02:00.0: eth0: link up