[ 0.000000] Linux version 2.6.34-gentoo-r11 (root@livecd) (gcc version 4.4.4 (Gentoo 4.4.4-r2 p1.2, pie-0.4.5) ) #7 SMP PREEMPT Tue Dec 28 00:25:55 EST 2010 [ 0.000000] Command line: [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable) [ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000cfde0000 (usable) [ 0.000000] BIOS-e820: 00000000cfde0000 - 00000000cfde3000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000cfde3000 - 00000000cfdf0000 (ACPI data) [ 0.000000] BIOS-e820: 00000000cfdf0000 - 00000000cfe00000 (reserved) [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) [ 0.000000] BIOS-e820: 0000000100000000 - 0000000228000000 (usable) [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] DMI 2.4 present. [ 0.000000] e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved) [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable) [ 0.000000] No AGP bridge found [ 0.000000] last_pfn = 0x228000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-C7FFF write-protect [ 0.000000] C8000-FFFFF uncachable [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back [ 0.000000] 1 base 000080000000 mask FFFFC0000000 write-back [ 0.000000] 2 base 0000C0000000 mask FFFFF0000000 write-back [ 0.000000] 3 base 0000CFE00000 mask FFFFFFE00000 uncachable [ 0.000000] 4 base 000100000000 mask FFFF00000000 write-back [ 0.000000] 5 base 000200000000 mask FFFFE0000000 write-back [ 0.000000] 6 base 000220000000 mask FFFFF8000000 write-back [ 0.000000] 7 disabled [ 0.000000] TOM2: 0000000228000000 aka 8832M [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] e820 update range: 00000000cfe00000 - 0000000100000000 (usable) ==> (reserved) [ 0.000000] last_pfn = 0xcfde0 max_arch_pfn = 0x400000000 [ 0.000000] initial memory mapped : 0 - 20000000 [ 0.000000] Using GB pages for direct mapping [ 0.000000] init_memory_mapping: 0000000000000000-00000000cfde0000 [ 0.000000] 0000000000 - 00c0000000 page 1G [ 0.000000] 00c0000000 - 00cfc00000 page 2M [ 0.000000] 00cfc00000 - 00cfde0000 page 4k [ 0.000000] kernel direct mapping tables up to cfde0000 @ 8000-b000 [ 0.000000] init_memory_mapping: 0000000100000000-0000000228000000 [ 0.000000] 0100000000 - 0200000000 page 1G [ 0.000000] 0200000000 - 0228000000 page 2M [ 0.000000] kernel direct mapping tables up to 228000000 @ a000-c000 [ 0.000000] ACPI: RSDP 00000000000f7200 00014 (v00 GBT ) [ 0.000000] ACPI: RSDT 00000000cfde3000 00038 (v01 GBT GBTUACPI 42302E31 GBTU 01010101) [ 0.000000] ACPI: FACP 00000000cfde3040 00074 (v01 GBT GBTUACPI 42302E31 GBTU 01010101) [ 0.000000] ACPI: DSDT 00000000cfde30c0 06467 (v01 GBT GBTUACPI 00001000 MSFT 03000000) [ 0.000000] ACPI: FACS 00000000cfde0000 00040 [ 0.000000] ACPI: SSDT 00000000cfde9600 00544 (v01 PTLTD POWERNOW 00000001 LTP 00000001) [ 0.000000] ACPI: HPET 00000000cfde9b80 00038 (v01 GBT GBTUACPI 42302E31 GBTU 00000098) [ 0.000000] ACPI: MCFG 00000000cfde9bc0 0003C (v01 GBT GBTUACPI 42302E31 GBTU 01010101) [ 0.000000] ACPI: APIC 00000000cfde9540 00084 (v01 GBT GBTUACPI 42302E31 GBTU 01010101) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at 0000000000000000-0000000228000000 [ 0.000000] Initmem setup node 0 0000000000000000-0000000228000000 [ 0.000000] NODE_DATA [0000000100000000 - 0000000100004fff] [ 0.000000] [ffffea0000000000-ffffea00079fffff] PMD -> [ffff880100200000-ffff8801071fffff] on node 0 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000001 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal 0x00100000 -> 0x00228000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[3] active PFN ranges [ 0.000000] 0: 0x00000001 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x000cfde0 [ 0.000000] 0: 0x00100000 -> 0x00228000 [ 0.000000] On node 0 totalpages: 2063742 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3942 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 14280 pages used for memmap [ 0.000000] DMA32 zone: 833048 pages, LIFO batch:31 [ 0.000000] Normal zone: 16576 pages used for memmap [ 0.000000] Normal zone: 1195840 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x4008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x10b9a201 base: 0xfed00000 [ 0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 24 [ 0.000000] early_res array is doubled to 64 at [3000 - 37ff] [ 0.000000] Allocating PCI resources starting at cfe00000 (gap: cfe00000:10200000) [ 0.000000] setup_percpu: NR_CPUS:4 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff880001e00000 s79080 r8192 d23320 u524288 [ 0.000000] pcpu-alloc: s79080 r8192 d23320 u524288 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2032830 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Node 0: aperture @ 20000000 size 32 MB [ 0.000000] Aperture pointing to e820 RAM. Ignoring. [ 0.000000] Your BIOS doesn't leave a aperture memory hole [ 0.000000] Please enable the IOMMU option in the BIOS setup [ 0.000000] This costs you 64 MB of RAM [ 0.000000] Mapping aperture over 65536 KB of RAM @ 20000000 [ 0.000000] Subtract (49 early reservations) [ 0.000000] #1 [0001000000 - 0001c195d4] TEXT DATA BSS [ 0.000000] #2 [000009f800 - 0000100000] BIOS reserved [ 0.000000] #3 [0001c1a000 - 0001c1a0fe] BRK [ 0.000000] #4 [0000001000 - 0000003000] TRAMPOLINE [ 0.000000] #5 [0000008000 - 000000a000] PGTABLE [ 0.000000] #6 [000000a000 - 000000b000] PGTABLE [ 0.000000] #7 [0100000000 - 0100005000] NODE_DATA [ 0.000000] #8 [0001c1a100 - 0001c1b100] BOOTMEM [ 0.000000] #9 [0001c19600 - 0001c19be8] BOOTMEM [ 0.000000] #10 [0100005000 - 0100006000] BOOTMEM [ 0.000000] #11 [0100006000 - 0100007000] BOOTMEM [ 0.000000] #12 [0100200000 - 0107200000] MEMMAP 0 [ 0.000000] #13 [0001c19c00 - 0001c19d80] BOOTMEM [ 0.000000] #14 [0001c1b100 - 0001c33100] BOOTMEM [ 0.000000] #15 [0001c33100 - 0001c4b100] BOOTMEM [ 0.000000] #16 [0001c4c000 - 0001c4d000] BOOTMEM [ 0.000000] #17 [0001c19d80 - 0001c19dc1] BOOTMEM [ 0.000000] #18 [0001c19e00 - 0001c19e43] BOOTMEM [ 0.000000] #19 [0001c4b100 - 0001c4b368] BOOTMEM [ 0.000000] #20 [0001c19e80 - 0001c19ee8] BOOTMEM [ 0.000000] #21 [0001c19f00 - 0001c19f68] BOOTMEM [ 0.000000] #22 [0001c19f80 - 0001c19fe8] BOOTMEM [ 0.000000] #23 [0001c4b380 - 0001c4b3e8] BOOTMEM [ 0.000000] #24 [0001c4b400 - 0001c4b468] BOOTMEM [ 0.000000] #25 [0001c4b480 - 0001c4b4e8] BOOTMEM [ 0.000000] #26 [0001c4b500 - 0001c4b568] BOOTMEM [ 0.000000] #27 [0001c4b580 - 0001c4b5e8] BOOTMEM [ 0.000000] #28 [0001c4b600 - 0001c4b668] BOOTMEM [ 0.000000] #29 [0001c4b680 - 0001c4b6e8] BOOTMEM [ 0.000000] #30 [0001c4b700 - 0001c4b701] BOOTMEM [ 0.000000] #31 [0001c4b740 - 0001c4b741] BOOTMEM [ 0.000000] #32 [0001e00000 - 0001e1b000] BOOTMEM [ 0.000000] #33 [0001e80000 - 0001e9b000] BOOTMEM [ 0.000000] #34 [0001f00000 - 0001f1b000] BOOTMEM [ 0.000000] #35 [0001f80000 - 0001f9b000] BOOTMEM [ 0.000000] #36 [0001c4b780 - 0001c4b788] BOOTMEM [ 0.000000] #37 [0001c4b7c0 - 0001c4b7c8] BOOTMEM [ 0.000000] #38 [0001c4b800 - 0001c4b810] BOOTMEM [ 0.000000] #39 [0001c4b840 - 0001c4b860] BOOTMEM [ 0.000000] #40 [0001c4b880 - 0001c4b9b0] BOOTMEM [ 0.000000] #41 [0001c4b9c0 - 0001c4ba10] BOOTMEM [ 0.000000] #42 [0001c4ba40 - 0001c4ba90] BOOTMEM [ 0.000000] #43 [0001c4d000 - 0001c55000] BOOTMEM [ 0.000000] #44 [0020000000 - 0024000000] BOOTMEM [ 0.000000] #45 [0001f9b000 - 0005f9b000] BOOTMEM [ 0.000000] #46 [0001c55000 - 0001c75000] BOOTMEM [ 0.000000] #47 [0001c75000 - 0001cb5000] BOOTMEM [ 0.000000] #48 [000000b000 - 0000013000] BOOTMEM [ 0.000000] Memory: 7995684k/9043968k available (5244k kernel code, 789000k absent, 259284k reserved, 2530k data, 3932k init) [ 0.000000] SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Experimental preemptable hierarchical RCU implementation. [ 0.000000] NR_IRQS:384 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] hpet clockevent registered [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 2304.781 MHz processor. [ 0.002004] Calibrating delay loop (skipped), value calculated using timer frequency.. 4609.55 BogoMIPS (lpj=2304778) [ 0.003362] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.006430] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.007805] Mount-cache hash table entries: 256 [ 0.007975] tseg: 00cfe00000 [ 0.007978] CPU: Physical Processor ID: 0 [ 0.008003] CPU: Processor Core ID: 0 [ 0.008056] mce: CPU supports 6 MCE banks [ 0.008115] using C1E aware idle routine [ 0.008168] Performance Events: AMD PMU driver. [ 0.008250] ... version: 0 [ 0.008295] ... bit width: 48 [ 0.008341] ... generic registers: 4 [ 0.008400] ... value mask: 0000ffffffffffff [ 0.008447] ... max period: 00007fffffffffff [ 0.008505] ... fixed-purpose events: 0 [ 0.008557] ... event mask: 000000000000000f [ 0.008641] Freeing SMP alternatives: 40k freed [ 0.008709] ACPI: Core revision 20100121 [ 0.017078] Setting APIC routing to flat [ 0.017644] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.027765] CPU0: AMD Phenom(tm) 9650 Quad-Core Processor stepping 03 [ 0.027999] System has AMD C1E enabled [ 0.027999] Switch to broadcast mode on CPU0 [ 0.031015] Booting Node 0, Processors #1 [ 0.103017] Switch to broadcast mode on CPU1 [ 0.105013] #2 [ 0.177017] Switch to broadcast mode on CPU2 [ 0.179011] #3 Ok. [ 0.251005] Brought up 4 CPUs [ 0.251017] Switch to broadcast mode on CPU3 [ 0.251106] Total of 4 processors activated (18439.10 BogoMIPS). [ 0.252054] khelper used greatest stack depth: 6016 bytes left [ 0.252114] NET: Registered protocol family 16 [ 0.253014] node 0 link 0: io port [c000, ffff] [ 0.253014] TOM: 00000000d8000000 aka 3456M [ 0.253062] Fam 10h mmconf [e0000000, e00fffff] [ 0.253064] node 0 link 0: mmio [a0000, bffff] [ 0.253066] node 0 link 0: mmio [d8000000, dfffffff] [ 0.253069] node 0 link 0: mmio [f0000000, fe02ffff] [ 0.253071] node 0 link 0: mmio [e0000000, e03fffff] ==> [e0100000, e03fffff] [ 0.253074] TOM2: 0000000228000000 aka 8832M [ 0.253127] bus: [00, 03] on node 0 link 0 [ 0.253129] bus: 00 index 0 [io 0x0000-0xffff] [ 0.253131] bus: 00 index 1 [mem 0x000a0000-0x000bffff] [ 0.253133] bus: 00 index 2 [mem 0xd8000000-0xdfffffff] [ 0.253135] bus: 00 index 3 [mem 0xe0400000-0xffffffff] [ 0.253136] bus: 00 index 4 [mem 0xe0100000-0xe03fffff] [ 0.253138] bus: 00 index 5 [mem 0x228000000-0xfcffffffff] [ 0.253149] ACPI: bus type pci registered [ 0.253202] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.253202] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820 [ 0.277114] PCI: Using configuration type 1 for base access [ 0.281019] bio: create slab at 0 [ 0.282422] ACPI: EC: Look up EC in DSDT [ 0.288067] ACPI: Interpreter enabled [ 0.288120] ACPI: (supports S0 S5) [ 0.288236] ACPI: Using IOAPIC for interrupt routing [ 0.295102] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.295223] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.296145] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] [ 0.296193] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] [ 0.296241] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] [ 0.296309] pci_root PNP0A03:00: host bridge window [mem 0x000c0000-0x000dffff] [ 0.296381] pci_root PNP0A03:00: host bridge window [mem 0xd7f00000-0xfebfffff] [ 0.296471] pci 0000:00:00.0: reg 1c: [mem 0xe0000000-0xffffffff 64bit] [ 0.296558] pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold [ 0.296560] pci 0000:00:0a.0: PME# disabled [ 0.296600] pci 0000:00:11.0: reg 10: [io 0xff00-0xff07] [ 0.296607] pci 0000:00:11.0: reg 14: [io 0xfe00-0xfe03] [ 0.296613] pci 0000:00:11.0: reg 18: [io 0xfd00-0xfd07] [ 0.296619] pci 0000:00:11.0: reg 1c: [io 0xfc00-0xfc03] [ 0.296625] pci 0000:00:11.0: reg 20: [io 0xfb00-0xfb0f] [ 0.296632] pci 0000:00:11.0: reg 24: [mem 0xfe02f000-0xfe02f3ff] [ 0.296680] pci 0000:00:12.0: reg 10: [mem 0xfe02e000-0xfe02efff] [ 0.296731] pci 0000:00:12.1: reg 10: [mem 0xfe02d000-0xfe02dfff] [ 0.296793] pci 0000:00:12.2: reg 10: [mem 0xfe02c000-0xfe02c0ff] [ 0.296842] pci 0000:00:12.2: supports D1 D2 [ 0.296844] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot [ 0.296848] pci 0000:00:12.2: PME# disabled [ 0.296879] pci 0000:00:13.0: reg 10: [mem 0xfe02b000-0xfe02bfff] [ 0.296929] pci 0000:00:13.1: reg 10: [mem 0xfe02a000-0xfe02afff] [ 0.296991] pci 0000:00:13.2: reg 10: [mem 0xfe029000-0xfe0290ff] [ 0.297044] pci 0000:00:13.2: supports D1 D2 [ 0.297046] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot [ 0.297049] pci 0000:00:13.2: PME# disabled [ 0.297152] pci 0000:00:14.1: reg 10: [io 0x0000-0x0007] [ 0.297158] pci 0000:00:14.1: reg 14: [io 0x0000-0x0003] [ 0.297164] pci 0000:00:14.1: reg 18: [io 0x0000-0x0007] [ 0.297170] pci 0000:00:14.1: reg 1c: [io 0x0000-0x0003] [ 0.297176] pci 0000:00:14.1: reg 20: [io 0xfa00-0xfa0f] [ 0.297300] pci 0000:00:14.5: reg 10: [mem 0xfe028000-0xfe028fff] [ 0.297436] pci 0000:01:05.0: reg 10: [mem 0xd8000000-0xdfffffff pref] [ 0.297439] pci 0000:01:05.0: reg 14: [io 0xee00-0xeeff] [ 0.297442] pci 0000:01:05.0: reg 18: [mem 0xfdee0000-0xfdeeffff] [ 0.297448] pci 0000:01:05.0: reg 24: [mem 0xfdd00000-0xfddfffff] [ 0.297459] pci 0000:01:05.0: supports D1 D2 [ 0.297473] pci 0000:01:05.1: reg 10: [mem 0xfdefc000-0xfdefffff] [ 0.297491] pci 0000:01:05.1: supports D1 D2 [ 0.297528] pci 0000:00:01.0: PCI bridge to [bus 01-01] [ 0.297584] pci 0000:00:01.0: bridge window [io 0xe000-0xefff] [ 0.297586] pci 0000:00:01.0: bridge window [mem 0xfdd00000-0xfdefffff] [ 0.297590] pci 0000:00:01.0: bridge window [mem 0xd8000000-0xdfffffff 64bit pref] [ 0.297634] pci 0000:02:00.0: reg 10: [io 0xde00-0xdeff] [ 0.297648] pci 0000:02:00.0: reg 18: [mem 0xfdfff000-0xfdffffff 64bit pref] [ 0.297658] pci 0000:02:00.0: reg 20: [mem 0xfdfe0000-0xfdfeffff 64bit pref] [ 0.297665] pci 0000:02:00.0: reg 30: [mem 0x00000000-0x0000ffff pref] [ 0.297693] pci 0000:02:00.0: supports D1 D2 [ 0.297694] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.297698] pci 0000:02:00.0: PME# disabled [ 0.297714] pci 0000:00:0a.0: PCI bridge to [bus 02-02] [ 0.297771] pci 0000:00:0a.0: bridge window [io 0xd000-0xdfff] [ 0.297774] pci 0000:00:0a.0: bridge window [mem 0xfda00000-0xfdafffff] [ 0.297777] pci 0000:00:0a.0: bridge window [mem 0xfdf00000-0xfdffffff 64bit pref] [ 0.297828] pci 0000:03:06.0: reg 10: [io 0xce00-0xceff] [ 0.297836] pci 0000:03:06.0: reg 14: [mem 0xfdcff000-0xfdcff0ff] [ 0.297868] pci 0000:03:06.0: reg 30: [mem 0x00000000-0x0000ffff pref] [ 0.297891] pci 0000:03:06.0: supports D1 D2 [ 0.297893] pci 0000:03:06.0: PME# supported from D1 D2 D3hot D3cold [ 0.297897] pci 0000:03:06.0: PME# disabled [ 0.297933] pci 0000:03:07.0: reg 10: [io 0xcc00-0xccff] [ 0.297940] pci 0000:03:07.0: reg 14: [mem 0xfdcfe000-0xfdcfe0ff] [ 0.297972] pci 0000:03:07.0: reg 30: [mem 0x00000000-0x0000ffff pref] [ 0.297995] pci 0000:03:07.0: supports D1 D2 [ 0.297997] pci 0000:03:07.0: PME# supported from D1 D2 D3hot D3cold [ 0.298005] pci 0000:03:07.0: PME# disabled [ 0.298051] pci 0000:03:0e.0: reg 10: [mem 0xfdcfd000-0xfdcfd7ff] [ 0.298059] pci 0000:03:0e.0: reg 14: [mem 0xfdcf8000-0xfdcfbfff] [ 0.298115] pci 0000:03:0e.0: supports D1 D2 [ 0.298116] pci 0000:03:0e.0: PME# supported from D0 D1 D2 D3hot [ 0.298121] pci 0000:03:0e.0: PME# disabled [ 0.298155] pci 0000:00:14.4: PCI bridge to [bus 03-03] (subtractive decode) [ 0.298205] pci 0000:00:14.4: bridge window [io 0xc000-0xcfff] [ 0.298215] pci 0000:00:14.4: bridge window [mem 0xfdc00000-0xfdcfffff] [ 0.298219] pci 0000:00:14.4: bridge window [mem 0xfdb00000-0xfdbfffff pref] [ 0.298221] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7] (subtractive decode) [ 0.298223] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode) [ 0.298225] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) [ 0.298227] pci 0000:00:14.4: bridge window [mem 0x000c0000-0x000dffff] (subtractive decode) [ 0.298229] pci 0000:00:14.4: bridge window [mem 0xd7f00000-0xfebfffff] (subtractive decode) [ 0.298243] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.298496] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT] [ 0.298587] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCEA._PRT] [ 0.298646] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT] [ 0.317060] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11) *0, disabled. [ 0.317530] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11) *0, disabled. [ 0.317996] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11) *0, disabled. [ 0.318430] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11) *0, disabled. [ 0.318889] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11) *0, disabled. [ 0.319375] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11) *0, disabled. [ 0.319840] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 10 11) *0, disabled. [ 0.320315] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 11) *0, disabled. [ 0.320725] vgaarb: device added: PCI:0000:01:05.0,decodes=io+mem,owns=io+mem,locks=none [ 0.320725] vgaarb: loaded [ 0.321019] SCSI subsystem initialized [ 0.321072] libata version 3.00 loaded. [ 0.321072] usbcore: registered new interface driver usbfs [ 0.321077] usbcore: registered new interface driver hub [ 0.321077] usbcore: registered new device driver usb [ 0.321077] PCI: Using ACPI for IRQ routing [ 0.321077] PCI: pci_cache_line_size set to 64 bytes [ 0.321077] pci 0000:00:00.0: no compatible bridge window for [mem 0xe0000000-0xffffffff 64bit] [ 0.322015] reserve RAM buffer: 000000000009f800 - 000000000009ffff [ 0.322017] reserve RAM buffer: 00000000cfde0000 - 00000000cfffffff [ 0.322039] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0 [ 0.322213] hpet0: 4 comparators, 32-bit 14.318180 MHz counter [ 0.324025] Switching to clocksource tsc [ 0.324400] pnp: PnP ACPI init [ 0.324452] ACPI: bus type pnp registered [ 0.325165] pnp 00:02: disabling [mem 0x00000000-0x00000fff window] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit] [ 0.325262] pnp 00:02: disabling [mem 0x00000000-0x00000fff window disabled] because it overlaps 0000:02:00.0 BAR 6 [mem 0x00000000-0x0000ffff pref] [ 0.325338] pnp 00:02: disabling [mem 0x00000000-0x00000fff window disabled] because it overlaps 0000:03:06.0 BAR 6 [mem 0x00000000-0x0000ffff pref] [ 0.325409] pnp 00:02: disabling [mem 0x00000000-0x00000fff window disabled] because it overlaps 0000:03:07.0 BAR 6 [mem 0x00000000-0x0000ffff pref] [ 0.327557] pnp 00:0c: disabling [mem 0x000d1a00-0x000d3fff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit] [ 0.327626] pnp 00:0c: disabling [mem 0x000f0000-0x000f7fff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit] [ 0.327701] pnp 00:0c: disabling [mem 0x000f8000-0x000fbfff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit] [ 0.327771] pnp 00:0c: disabling [mem 0x000fc000-0x000fffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit] [ 0.327840] pnp 00:0c: disabling [mem 0x00000000-0x0009ffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit] [ 0.327910] pnp 00:0c: disabling [mem 0x00100000-0xcfddffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit] [ 0.328099] pnp: PnP ACPI: found 13 devices [ 0.328146] ACPI: ACPI bus type pnp unregistered [ 0.328204] system 00:01: [io 0x04d0-0x04d1] has been reserved [ 0.328258] system 00:01: [io 0x0220-0x0225] has been reserved [ 0.328309] system 00:01: [io 0x0290-0x0294] has been reserved [ 0.328365] system 00:02: [io 0x4100-0x411f] has been reserved [ 0.328413] system 00:02: [io 0x0228-0x022f] has been reserved [ 0.328469] system 00:02: [io 0x0238-0x023f] has been reserved [ 0.328517] system 00:02: [io 0x040b] has been reserved [ 0.328569] system 00:02: [io 0x04d6] has been reserved [ 0.328616] system 00:02: [io 0x0c00-0x0c01] has been reserved [ 0.328667] system 00:02: [io 0x0c14] has been reserved [ 0.328719] system 00:02: [io 0x0c50-0x0c52] has been reserved [ 0.328771] system 00:02: [io 0x0c6c-0x0c6d] has been reserved [ 0.328823] system 00:02: [io 0x0c6f] has been reserved [ 0.328875] system 00:02: [io 0x0cd0-0x0cd1] has been reserved [ 0.328928] system 00:02: [io 0x0cd2-0x0cd3] has been reserved [ 0.328980] system 00:02: [io 0x0cd4-0x0cdf] has been reserved [ 0.329033] system 00:02: [io 0x4000-0x40fe] has been reserved [ 0.329085] system 00:02: [io 0x4210-0x4217] has been reserved [ 0.329138] system 00:02: [io 0x0b00-0x0b0f] has been reserved [ 0.329190] system 00:02: [io 0x0b10-0x0b1f] has been reserved [ 0.329243] system 00:02: [io 0x0b20-0x0b3f] has been reserved [ 0.329303] system 00:02: [mem 0xfee00400-0xfee00fff window] has been reserved [ 0.329373] system 00:0b: [mem 0xe0000000-0xefffffff] has been reserved [ 0.329423] system 00:0c: [mem 0xcfde0000-0xcfdfffff] could not be reserved [ 0.329485] system 00:0c: [mem 0xffff0000-0xffffffff] has been reserved [ 0.329539] system 00:0c: [mem 0xcfef0000-0xd7eeffff] could not be reserved [ 0.329594] system 00:0c: [mem 0xfec00000-0xfec00fff] could not be reserved [ 0.329642] system 00:0c: [mem 0xfee00000-0xfee00fff] could not be reserved [ 0.329695] system 00:0c: [mem 0xfff80000-0xfffeffff] has been reserved [ 0.334376] pci 0000:00:01.0: PCI bridge to [bus 01-01] [ 0.334431] pci 0000:00:01.0: bridge window [io 0xe000-0xefff] [ 0.334490] pci 0000:00:01.0: bridge window [mem 0xfdd00000-0xfdefffff] [ 0.334539] pci 0000:00:01.0: bridge window [mem 0xd8000000-0xdfffffff 64bit pref] [ 0.334608] pci 0000:02:00.0: BAR 6: assigned [mem 0xfdf00000-0xfdf0ffff pref] [ 0.334677] pci 0000:00:0a.0: PCI bridge to [bus 02-02] [ 0.334731] pci 0000:00:0a.0: bridge window [io 0xd000-0xdfff] [ 0.334779] pci 0000:00:0a.0: bridge window [mem 0xfda00000-0xfdafffff] [ 0.334834] pci 0000:00:0a.0: bridge window [mem 0xfdf00000-0xfdffffff 64bit pref] [ 0.334907] pci 0000:03:06.0: BAR 6: assigned [mem 0xfdb00000-0xfdb0ffff pref] [ 0.334972] pci 0000:03:07.0: BAR 6: assigned [mem 0xfdb10000-0xfdb1ffff pref] [ 0.335036] pci 0000:00:14.4: PCI bridge to [bus 03-03] [ 0.335096] pci 0000:00:14.4: bridge window [io 0xc000-0xcfff] [ 0.335146] pci 0000:00:14.4: bridge window [mem 0xfdc00000-0xfdcfffff] [ 0.335201] pci 0000:00:14.4: bridge window [mem 0xfdb00000-0xfdbfffff pref] [ 0.335288] pci 0000:00:0a.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 0.335344] pci 0000:00:0a.0: setting latency timer to 64 [ 0.335351] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 0.335353] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 0.335355] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 0.335357] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff] [ 0.335359] pci_bus 0000:00: resource 8 [mem 0xd7f00000-0xfebfffff] [ 0.335360] pci_bus 0000:01: resource 0 [io 0xe000-0xefff] [ 0.335362] pci_bus 0000:01: resource 1 [mem 0xfdd00000-0xfdefffff] [ 0.335364] pci_bus 0000:01: resource 2 [mem 0xd8000000-0xdfffffff 64bit pref] [ 0.335366] pci_bus 0000:02: resource 0 [io 0xd000-0xdfff] [ 0.335368] pci_bus 0000:02: resource 1 [mem 0xfda00000-0xfdafffff] [ 0.335370] pci_bus 0000:02: resource 2 [mem 0xfdf00000-0xfdffffff 64bit pref] [ 0.335372] pci_bus 0000:03: resource 0 [io 0xc000-0xcfff] [ 0.335374] pci_bus 0000:03: resource 1 [mem 0xfdc00000-0xfdcfffff] [ 0.335375] pci_bus 0000:03: resource 2 [mem 0xfdb00000-0xfdbfffff pref] [ 0.335377] pci_bus 0000:03: resource 4 [io 0x0000-0x0cf7] [ 0.335379] pci_bus 0000:03: resource 5 [io 0x0d00-0xffff] [ 0.335381] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff] [ 0.335382] pci_bus 0000:03: resource 7 [mem 0x000c0000-0x000dffff] [ 0.335384] pci_bus 0000:03: resource 8 [mem 0xd7f00000-0xfebfffff] [ 0.335406] NET: Registered protocol family 2 [ 0.335677] IP route cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.337106] TCP established hash table entries: 524288 (order: 11, 8388608 bytes) [ 0.340035] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.340471] TCP: Hash tables configured (established 524288 bind 65536) [ 0.340527] TCP reno registered [ 0.340592] UDP hash table entries: 4096 (order: 5, 131072 bytes) [ 0.340712] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes) [ 0.340904] NET: Registered protocol family 1 [ 0.341102] RPC: Registered udp transport module. [ 0.341158] RPC: Registered tcp transport module. [ 0.341212] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.341276] pci 0000:00:01.0: MSI quirk detected; subordinate MSI disabled [ 0.451593] pci 0000:01:05.0: Boot video device [ 0.451607] PCI: CLS 4 bytes, default 64 [ 0.454055] PCI-DMA: Disabling AGP. [ 0.454277] PCI-DMA: aperture base @ 20000000 size 65536 KB [ 0.454329] PCI-DMA: using GART IOMMU. [ 0.454383] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture [ 0.459659] microcode: CPU0: patch_level=0x1000083 [ 0.459719] microcode: CPU1: patch_level=0x1000083 [ 0.459777] microcode: CPU2: patch_level=0x1000083 [ 0.459835] microcode: CPU3: patch_level=0x1000083 [ 0.459927] microcode: Microcode Update Driver: v2.00 , Peter Oruba [ 0.460173] Intel AES-NI instructions are not detected. [ 0.460227] Intel PCLMULQDQ-NI instructions are not detected. [ 0.476352] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.479728] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.480200] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 0.480466] Slow work thread pool: Starting up [ 0.480555] Slow work thread pool: Ready [ 0.480710] SGI XFS with security attributes, large block/inode numbers, no debug enabled [ 0.481456] msgmni has been set to 15745 [ 0.482570] alg: No test for fcrypt (fcrypt-generic) [ 0.484316] cryptomgr_test used greatest stack depth: 5920 bytes left [ 0.484475] alg: No test for stdrng (krng) [ 0.488599] io scheduler noop registered [ 0.488775] io scheduler cfq registered (default) [ 0.488981] pcieport 0000:00:0a.0: setting latency timer to 64 [ 0.489006] pcieport 0000:00:0a.0: irq 24 for MSI/MSI-X [ 0.498223] Hangcheck: starting hangcheck timer 0.9.0 (tick is 180 seconds, margin is 60 seconds). [ 0.498297] Hangcheck: Using get_cycles(). [ 0.498756] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 0.498824] ACPI: Power Button [PWRB] [ 0.498953] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 0.499026] ACPI: Power Button [PWRF] [ 0.499538] [drm] Initialized drm 1.1.0 20060810 [ 0.499678] Floppy drive(s): fd0 is 1.44M [ 0.514480] FDC 0 is a post-1991 82077 [ 0.516512] loop: module loaded [ 0.516843] ahci 0000:00:11.0: version 3.0 [ 0.516864] ahci 0000:00:11.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 0.517043] ahci 0000:00:11.0: AHCI 0001.0100 32 slots 6 ports 3 Gbps 0x3f impl SATA mode [ 0.517113] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc [ 0.517617] scsi0 : ahci [ 0.517798] scsi1 : ahci [ 0.517947] scsi2 : ahci [ 0.518586] scsi3 : ahci [ 0.518737] scsi4 : ahci [ 0.518888] scsi5 : ahci [ 0.519116] ata1: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f100 irq 22 [ 0.519186] ata2: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f180 irq 22 [ 0.519251] ata3: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f200 irq 22 [ 0.519316] ata4: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f280 irq 22 [ 0.519387] ata5: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f300 irq 22 [ 0.519455] ata6: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f380 irq 22 [ 0.519590] work_for_cpu used greatest stack depth: 5792 bytes left [ 0.521625] pata_atiixp 0000:00:14.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.521788] scsi6 : pata_atiixp [ 0.521943] scsi7 : pata_atiixp [ 0.522972] ata7: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xfa00 irq 14 [ 0.523021] ata8: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xfa08 irq 15 [ 0.523115] work_for_cpu used greatest stack depth: 5440 bytes left [ 0.523480] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.523576] ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 0.523639] ehci_hcd 0000:00:12.2: EHCI Host Controller [ 0.523779] ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1 [ 0.523869] ehci_hcd 0000:00:12.2: applying AMD SB600/SB700 USB freeze workaround [ 0.523957] ehci_hcd 0000:00:12.2: debug port 1 [ 0.524031] ehci_hcd 0000:00:12.2: irq 17, io mem 0xfe02c000 [ 0.529568] ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00 [ 0.529756] hub 1-0:1.0: USB hub found [ 0.529812] hub 1-0:1.0: 6 ports detected [ 0.529952] ehci_hcd 0000:00:13.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 0.530015] ehci_hcd 0000:00:13.2: EHCI Host Controller [ 0.530125] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2 [ 0.530211] ehci_hcd 0000:00:13.2: applying AMD SB600/SB700 USB freeze workaround [ 0.530285] ehci_hcd 0000:00:13.2: debug port 1 [ 0.530359] ehci_hcd 0000:00:13.2: irq 19, io mem 0xfe029000 [ 0.535593] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00 [ 0.535777] hub 2-0:1.0: USB hub found [ 0.535831] hub 2-0:1.0: 6 ports detected [ 0.535960] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.536043] ohci_hcd 0000:00:12.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.536100] ohci_hcd 0000:00:12.0: OHCI Host Controller [ 0.536206] ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 3 [ 0.536309] ohci_hcd 0000:00:12.0: irq 16, io mem 0xfe02e000 [ 0.590727] hub 3-0:1.0: USB hub found [ 0.590784] hub 3-0:1.0: 3 ports detected [ 0.590897] ohci_hcd 0000:00:12.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.590960] ohci_hcd 0000:00:12.1: OHCI Host Controller [ 0.591069] ohci_hcd 0000:00:12.1: new USB bus registered, assigned bus number 4 [ 0.591149] ohci_hcd 0000:00:12.1: irq 16, io mem 0xfe02d000 [ 0.645734] hub 4-0:1.0: USB hub found [ 0.645790] hub 4-0:1.0: 3 ports detected [ 0.645910] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 0.645971] ohci_hcd 0000:00:13.0: OHCI Host Controller [ 0.646082] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 5 [ 0.646173] ohci_hcd 0000:00:13.0: irq 18, io mem 0xfe02b000 [ 0.678047] ata7.00: ATAPI: LITE-ON DVDRW SOHW-1213S, TS09, max UDMA/33 [ 0.683988] ata7.00: configured for UDMA/33 [ 0.700737] hub 5-0:1.0: USB hub found [ 0.700789] hub 5-0:1.0: 3 ports detected [ 0.700908] ohci_hcd 0000:00:13.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 0.700969] ohci_hcd 0000:00:13.1: OHCI Host Controller [ 0.701079] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 6 [ 0.701159] ohci_hcd 0000:00:13.1: irq 18, io mem 0xfe02a000 [ 0.755741] hub 6-0:1.0: USB hub found [ 0.755797] hub 6-0:1.0: 3 ports detected [ 0.755914] ohci_hcd 0000:00:14.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 0.755976] ohci_hcd 0000:00:14.5: OHCI Host Controller [ 0.756093] ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 7 [ 0.756174] ohci_hcd 0000:00:14.5: irq 18, io mem 0xfe028000 [ 0.810737] hub 7-0:1.0: USB hub found [ 0.810794] hub 7-0:1.0: 2 ports detected [ 0.810950] usbcore: registered new interface driver usblp [ 0.811001] Initializing USB Mass Storage driver... [ 0.811108] usbcore: registered new interface driver usb-storage [ 0.811162] USB Mass Storage support registered. [ 0.811293] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 0.812035] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.812092] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.812281] mice: PS/2 mouse device common for all mice [ 0.812559] rtc_cmos 00:05: RTC can wake from S4 [ 0.812672] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0 [ 0.812757] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs [ 0.812844] i2c /dev entries driver [ 0.812965] md: raid1 personality registered for level 1 [ 0.813177] device-mapper: ioctl: 4.17.0-ioctl (2010-03-05) initialised: dm-devel@redhat.com [ 0.813353] cpuidle: using governor ladder [ 0.813407] cpuidle: using governor menu [ 0.814559] usbcore: registered new interface driver hiddev [ 0.814653] usbcore: registered new interface driver usbhid [ 0.814707] usbhid: USB HID core driver [ 0.814775] oprofile: AMD IBS detected (0x00000001) [ 0.814895] oprofile: using NMI interrupt. [ 0.814955] Netfilter messages via NETLINK v0.30. [ 0.815028] nf_conntrack version 0.5.0 (16384 buckets, 65536 max) [ 0.815263] ctnetlink v0.93: registering with nfnetlink. [ 0.815834] ip_tables: (C) 2000-2006 Netfilter Core Team [ 0.815913] TCP cubic registered [ 0.815967] NET: Registered protocol family 17 [ 0.828545] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 0.828628] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 0.828703] ata6: SATA link down (SStatus 0 SControl 300) [ 0.828785] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 0.828865] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 0.838348] ata1.00: ATA-8: WDC WD1000FYPS-01ZKB0, 02.01B01, max UDMA/133 [ 0.838402] ata1.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA [ 0.839997] ata1.00: configured for UDMA/133 [ 0.850700] scsi 0:0:0:0: Direct-Access ATA WDC WD1000FYPS-0 02.0 PQ: 0 ANSI: 5 [ 0.851001] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) [ 0.851016] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 0.851156] sd 0:0:0:0: [sda] Write Protect is off [ 0.851204] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 0.851218] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 0.851386] sda: sda1 sda2 [ 0.853984] sd 0:0:0:0: [sda] Attached SCSI disk [ 0.857533] ata2.00: ATA-8: ST31500341AS, CC1H, max UDMA/133 [ 0.857536] ata4.00: ATA-8: ST31500341AS, CC1H, max UDMA/133 [ 0.857539] ata4.00: 2930277168 sectors, multi 0: LBA48 NCQ (depth 31/32) [ 0.857669] ata3.00: ATA-8: ST31500341AS, CC1H, max UDMA/133 [ 0.857670] ata3.00: 2930277168 sectors, multi 0: LBA48 NCQ (depth 31/32) [ 0.857795] ata2.00: 2930277168 sectors, multi 0: LBA48 NCQ (depth 31/32) [ 0.873411] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2 [ 0.899903] ata4.00: configured for UDMA/133 [ 0.899928] ata3.00: configured for UDMA/133 [ 0.899952] ata2.00: configured for UDMA/133 [ 0.911690] scsi 1:0:0:0: Direct-Access ATA ST31500341AS CC1H PQ: 0 ANSI: 5 [ 0.911931] sd 1:0:0:0: [sdb] 2930277168 512-byte logical blocks: (1.50 TB/1.36 TiB) [ 0.912024] sd 1:0:0:0: Attached scsi generic sg1 type 0 [ 0.912026] sd 1:0:0:0: [sdb] Write Protect is off [ 0.912029] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 0.912041] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 0.912121] sdb: [ 0.912330] scsi 2:0:0:0: Direct-Access ATA ST31500341AS CC1H PQ: 0 ANSI: 5 [ 0.912651] sd 2:0:0:0: [sdc] 2930277168 512-byte logical blocks: (1.50 TB/1.36 TiB) [ 0.912723] sd 2:0:0:0: Attached scsi generic sg2 type 0 [ 0.912752] sd 2:0:0:0: [sdc] Write Protect is off [ 0.912754] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00 [ 0.912769] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 0.912862] sdc: [ 0.912966] scsi 3:0:0:0: Direct-Access ATA ST31500341AS CC1H PQ: 0 ANSI: 5 [ 0.913256] sd 3:0:0:0: [sdd] 2930277168 512-byte logical blocks: (1.50 TB/1.36 TiB) [ 0.913368] sd 3:0:0:0: [sdd] Write Protect is off [ 0.913422] sd 3:0:0:0: [sdd] Mode Sense: 00 3a 00 00 [ 0.913440] sd 3:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 0.913543] sd 3:0:0:0: Attached scsi generic sg3 type 0 [ 0.913611] sdd: sdc1 [ 0.931913] sd 2:0:0:0: [sdc] Attached SCSI disk [ 0.936552] sdd1 [ 0.936869] sd 3:0:0:0: [sdd] Attached SCSI disk [ 0.940619] sdb1 [ 0.940894] sd 1:0:0:0: [sdb] Attached SCSI disk [ 0.981624] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.182533] input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input3 [ 1.348709] ata5.00: ATA-8: WDC WD20EARS-00J2GB0, 80.00A80, max UDMA/133 [ 1.348759] ata5.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA [ 1.353885] ata5.00: configured for UDMA/133 [ 1.365232] scsi 4:0:0:0: Direct-Access ATA WDC WD20EARS-00J 80.0 PQ: 0 ANSI: 5 [ 1.365478] sd 4:0:0:0: [sde] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB) [ 1.365536] sd 4:0:0:0: Attached scsi generic sg4 type 0 [ 1.365629] sd 4:0:0:0: [sde] Write Protect is off [ 1.365683] sd 4:0:0:0: [sde] Mode Sense: 00 3a 00 00 [ 1.365699] sd 4:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.365875] sde: [ 1.366829] scsi 6:0:0:0: CD-ROM LITE-ON DVDRW SOHW-1213S TS09 PQ: 0 ANSI: 5 [ 1.371696] sr0: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray [ 1.371751] Uniform CD-ROM driver Revision: 3.20 [ 1.371912] sr 6:0:0:0: Attached scsi CD-ROM sr0 [ 1.372015] sr 6:0:0:0: Attached scsi generic sg5 type 5 [ 1.770533] sde1 [ 1.770849] sd 4:0:0:0: [sde] Attached SCSI disk [ 1.770942] Freeing unused kernel memory: 3932k freed [ 2.372165] async/6 used greatest stack depth: 5296 bytes left [ 2.654959] UDF-fs: No partition found (1) [ 2.670655] XFS mounting filesystem dm-0 [ 2.819308] Ending clean XFS mount for filesystem: dm-0 [ 2.819483] exe used greatest stack depth: 5168 bytes left [ 3.315263] stty used greatest stack depth: 4760 bytes left [ 4.061389] udev: starting version 151 [ 4.197207] 8139too: 8139too Fast Ethernet driver 0.9.28 [ 4.197236] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 4.197280] 8139too 0000:03:06.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 4.198057] 8139too 0000:03:06.0: eth0: RealTek RTL8139 at 0xffffc900118bc000, 00:30:bd:1e:8f:b3, IRQ 20 [ 4.198071] r8169 0000:02:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 4.198105] 8139too 0000:03:07.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21 [ 4.198811] 8139too 0000:03:07.0: eth1: RealTek RTL8139 at 0xffffc900117b6000, 00:30:bd:1e:dd:7d, IRQ 21 [ 4.198978] r8169 0000:02:00.0: setting latency timer to 64 [ 4.199023] r8169 0000:02:00.0: irq 25 for MSI/MSI-X [ 4.199260] r8169 0000:02:00.0: eth2: RTL8168c/8111c at 0xffffc900117b2000, 00:24:1d:27:bf:6f, XID 1c4000c0 IRQ 25 [ 4.212354] udev: renamed network interface eth2 to eth0 [ 4.218508] udev: renamed network interface eth1_rename to eth2 [ 4.224274] ACPI: resource piix4_smbus [io 0x0b00-0x0b07] conflicts with ACPI region SOR1 [irq 2816-2831 window] [ 4.224277] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 4.242234] k10temp 0000:00:18.3: unreliable CPU thermal sensor; monitoring disabled [ 4.259646] udev: renamed network interface eth0_rename to eth1 [ 4.264251] CE: hpet increased min_delta_ns to 7500 nsec [ 4.381338] md: bind [ 4.387810] md: bind [ 4.392061] md: bind [ 4.396299] md: bind [ 12.067147] dmesg used greatest stack depth: 4312 bytes left [ 16.868650] r8169 0000:02:00.0: eth0: link up [ 16.868657] r8169 0000:02:00.0: eth0: link up [ 20.027415] r8169: WARNING! Changing of MTU on this NIC may lead to frame reception errors! [ 21.626747] bash used greatest stack depth: 3640 bytes left